In the process of cooling of the HEJ the cold air is changed into hot blast and...
冷却用空气在冷却炉胆的过程中成为热风并被送入炉内实行热风操作。
The design and calculation combined bricks in trident of main and round hot blast pipes on b.
对高炉热风主管、围管三叉口组合砖的设计计算进行了探讨和实践。
A renovation project of miniaturization and high efficiency is provided for the hot blast stove.
提出了向小型化，高效化改造热风炉的方案。
Presentation on design and features of hanger and tensioning device for super large BF hot blast bustle.
介绍了特大型高炉热风围管吊挂及拉紧装置型式及特点。
The increase of hot blast temperature by means of staggered parallel blasting in hot stoves is discussed.
本文讨论利用交错并联送风方式提高热风温度。
The selection of refractories for hot blast stove should be done together by designer, manufacturer and user.
设计、制造、用户等单位应该共同决定耐火材料的选择。
It shows that blast temperature can be improved in effect by regulating operation parameter of hot blast stove.
研究结果表明通过调整热风炉操作参数，可以有效提高风温。
The technical processing of designing and producing the cast iron recuperator for hot blast cupola is available.
根据熔化原理，提供设计制造铸铁热风炉胆的工艺过程和利用导程刮板的造型方法。
Using hot blast system to supply air to the center region, the air quality in the productive area has been improved.
利用热风系统作为中心区域补风，改善主生产区空气质量。
Increasing the temperature of hot blast is an important measure for higher coal rate and lower fuel rate of blast furnace.
提高热风温度是高炉增加喷煤量和降低燃料比的重要措施。
The top-firing air and gas self-preheating hot blast stove adopts a patented burner and high blast temperature bypass flue.
顶燃式空气、煤气自身双预热热风炉采用了顶燃式燃烧器热风炉专利的燃烧器技术和高温旁通烟道技术。
The top-firing air and gas self-preheating hot blast stove adopts a patented burner and high blast temperature bypass flue.
顶燃式空气、煤气自身双预热热风炉采用了顶燃式燃烧器热风炉专利的燃烧器技术和高温旁通烟道技术。
The design and calculation combined bricks in trident of main and round hot blast pipes on B. F. were studied and practiced.
对高炉热风主管、围管三叉口组合砖的设计计算进行了探讨和实践。
The hot blast stove system has four kinds of operating mode: full automatic, semi automatic, remote manual and local manual.
热风炉系统有四种操作方式：全自动、半自动、远程手动、机旁手动？
These products could be used for every part of small-middle hot blast stove dur to their excellent physical and chemical properties.
产品具有优良的高温物理性能和抗化学侵蚀性能，广泛用于中小高炉炉衬的各个部位。
The strategy and the process of design are expounded. The model of fuzzy adaptive control which used in hot blast stove is established.
详细阐述了热风炉燃烧控制系统的设计思想及设计步骤：建立了热风炉模糊自适应控制模型；
Due to design and other factors, the hot blast furnace system used in production reveals some problems, which restrict normal production.
由于设计等方面的因素，所用热风炉系统在生产中存在不少问题，制约着生产的正常进行。
The hot air is always carried to the furnace by a powerful turboblower, through the hot blast main, bustle pipe, bootleg, blowpipe and tuyere.
热风由功率强大的鼓风机通过热风总管、环形风管、风口小弯管、直吹管和风口不断鼓人高炉。
Tt is necessary to select refractories carefully in order to meet the requirements for high temperature hot blast and long life of hot blast stove.
为了满足热风炉高风温和长寿的需要，必须认真选择耐火材料。
The KQDL series cupola was trial produced aiming at the problems existing in the cupola, cold blast cupola, hot blast cupola, water cooling cupola.
前言：针对冲天炉，冷风炉、热风炉、水冷却炉存在的问题试制出了“KQDL系列冲天炉”。
Hot blast temperature was notably increased through suitable revamping, greatly extending the service life of the stove and achieving good results.
通过合理的改造，热风温度有了明显的提高，炉子寿命大大延长，取得了良好的效果。
These products could be used for every part of hot blast stove dur to their steady volume, low creeping and well thermal shock resistance properties.
产品具有优良的体积稳定性，低蠕变率和良好的热抗震性能，广泛用于热风炉的各个部位。
Some key problems in hot blast furnace design are analysis, such as operation reliability, strengthen heat transfer, expanding compensation and so on.
分析了热风炉设计中的工作可靠性、强化传热、膨胀补偿等关键问题。
Properties of Products: We use Yangquan Super bauxites to produce high alumina bricks for hot blast stove. Main mineral compositions are mullite phases.
产品特点：热风炉用高铝砖采用阳泉优质矾土孰料为主要原料，经高压成型、高温烧结而成，主要矿物组成为莫来石。
RUL, creeping in middle temperature and thermal shock properties are excellent. These products are popular for the middle-low temperature parts of hot blast stove.
产品荷重软化温度较高，抗中温蠕变性能好，抗热冲击性能好，是热风炉中低温部位用的主要耐火材料。
The selection of coal fired hot blast stoves designed for mines is introduced and the points needing attention in the process of installing and using them are presented.
介绍了矿井用燃煤热风炉的选择，提出了热风炉安装、使用中的注意事项。
It is then fed into thermostatic hot blast area and the axially blowing hot blast eliminates moisture inside the tube quickly while the roller irons the surface of the tube.
一热风恒温区域，具有至少一藉以将一定温热风轴向吹向该纸管，使该纸管管内蒸发出的水份被热风迅速移除，及维持该纸管表面温度的热风产生器；
It is then fed into thermostatic hot blast area and the axially blowing hot blast eliminates moisture inside the tube quickly while the roller irons the surface of the tube.
一热风恒温区域，具有至少一藉以将一定温热风轴向吹向该纸管，使该纸管管内蒸发出的水份被热风迅速移除，及维持该纸管表面温度的热风产生器；
应用推荐