Hydraulic jack including hydraulic press and hydraulic press.
液压千斤顶包括水压机和油压机。
This bridge has a length of 12 meters and the curving is using a hydraulic press.
桥长共12米，使用水压机进行卷曲。
The hydraulic press mainly includes the hydraulic press and the hydraulic press.
液压机主要包括水压机和油压机。
Forging USES the hydraulic jack much is the hydraulic press, the tonnage is high.
锻造用液压千斤顶多是水压机，吨位较高。
The hydraulic press produces the general pressure is big, commonly used in forging and ramming.
水压机产生的总压力较大，常用于锻造和冲压。
This article introduced the design of the hydraulic system of 100T Four-column Hydraulic Press.
本论文论述的是100T四柱液压机液压系统的设计。
CNC Hydraulic Press Brake offers "Conic Bending" up to a maximum of15 mm along the whole length.
电脑数控液压式折弯机提供“锥形折弯”全长尺寸最大可达到15毫米。
Our country makes the first ten thousand ton hydraulic press is the hammer forging hydraulic press.
我国制造的第一台万吨水压机就是自由锻造水压机。
The high speed forging hydraulic press has already become one of the most important forging equipment.
快速锻造液压机已成为目前重要的锻造设备之一。
Operation of the ** Full-automatic Hydraulic Press is carried out mostly on the slight-touching keyboard.
全自动液压压砖机的操作主要集中在轻触键盘上。
Main hydraulic cylinder columns and cross beams of hydraulic press are designed with finite element method.
采用有限元方法对液压机中的主液压缸、横梁和立柱进行结构设计。
Control mode and precision of hydraulic press's pressing speed are one of key technology of hydraulic press.
液压机压制速度控制方式和精度是液压机的关键技术之一。
Solutions have been put forth upon analysis of causes producing hydraulic impact in work of hydraulic press.
分析了液压机工作中液压冲击现象产生的原因，并在此基础上提供出了解决措施。
The forging pump press divides into the drop forging hydraulic press and the free forging hydraulic press two kinds.
锻造水压机又分为模锻水压机和自由锻水压机两种。
Riveting machines, metal shavings Press, forging machine operators, large products such as hot forging hydraulic press.
铆接机、金属屑压块机、锻造操作机、大型热锻液压机等产品。
The drop forging hydraulic pressure confidential USES the mold, but the free forging hydraulic press does not use the mold.
模锻水压机要用模具，而自由锻水压机不用模具。
The most frequent break downs of hydraulic press hydraulic system have been introduced with principle analysis and solution.
介绍了液压机液压系统通常易出现的故障，并作了原理分析，提出了排除方法。
This paper briefly introduces the application of PLC (programmable logic Controller) in controlling system of hydraulic press.
简要介绍了可编程控制器即PLC在液压机控制系统中的应用。
The bionics algorithm provides a new scientism method on designing plank thickness of the hydraulic press frame and other box structures.
仿生算法为大型油压机横梁及其它薄壁箱形结构的优化设计提供了一种全新可行的科学方法。
It utilized hydraulic press transducer and adopted PLC as the core of the system, which realized no electrical quantity at measure point.
它采用可编程控制器(PLC)作为系统的运算控制核心，利用液压式压力发生器，实现了测量点处无电气量。
Metal Forming Machinery, Heavy-duty Machine, Punch Press, Hydraulic Press, Plate Shear, Flanging Machine, Bender, Automatic Forging Machine.
锻压机械、重型机床、冲压机床、液压机、剪钣机、折弯机、卷板机、弯管机、自动锻机。
The effect of molding pressure on packing density of coke powders has been studied in a hydraulic press machine with advanced data-collected system.
采用液压机和先进的数据采集系统对模压压力影响焦炭粉体的堆积密度进行了研究。
The principle of forging hydraulic press by pump direct drive is introduced in this paper, the math model, control method and strategy are also described.
介绍泵直接传动的锻造液压机工作原理，对其控制机理、数学模型、控制策略进行了研究，并成功地应用于生产实践中。
This article introduces an available control system for the huge hydraulic press machine tool by means of a personal computer (PC) as the main controller.
本文介绍了一个采用个人电脑（PC）作为工业控制系统的主控机来控制大型锻压机床的成功例子。
In the die design, the use of spherical punch made the process of deep drawing and reverse redrawing achieved in one set of mold and common hydraulic press.
在进行模具设计时，采用半球形凸模等方式可以实现正、反拉深在一套模具，普通液压机上完成加工。
In addition, it demonstrates reformation feasibility of the type 3150 hydraulic press machine and its hydraulic system principle sketch, and controlling ways.
同时论证了3150吨油压机改造可行性及液压系统原理图。并讨论了两种控制方案。
The main cylinder of hydraulic press is ground by self-made belt grinding device. The method supplys grinding of deep blind hole a economic and reliable technology.
本文阐述了利用自制的砂带磨削装置，对液压机主缸内孔行进磨削加工。该方法为深盲孔的磨削加工提供了经济可靠的工艺方法。
Forging forming process of large pipe produced on vertical hydraulic press was discussed. Relative tools and dies were designed, and production process was drawn up.
探讨在立式水压机上生产大型管材的锻造成型过程，设计相应的工模具，制订生产工艺。
Forging forming process of large pipe produced on vertical hydraulic press was discussed. Relative tools and dies were designed, and production process was drawn up.
探讨在立式水压机上生产大型管材的锻造成型过程，设计相应的工模具，制订生产工艺。
应用推荐