An intelligent design method to the SISO systems is introduced. This method can give consideration to both the performance of the control system and the simplicity of the controller.
介绍一种用于单变量控制系统的智能设计方法，该方法能兼顾控制系统的性能和控制器的简单性两方面要求。
In this paper, the design method and process of intelligent controller is narrated from the view of hardware and software.
从软件和硬件角度详细介绍了智能调节器的设计原理和方法。
This paper describes the design principle and method of an intelligent emulating system of electronic instrument, emphatically introduces some ban techniques.
介绍了电子测量仪器智能仿真系统的设计原则和设计方法，着重讨论了设计中采用的一些主要技术。
This dissertation presents a design idea and method of a kind of new intelligent controller that is named a nine-points controller.
本论文提出了一种新的智能控制器设计的思想和方法，将这种控制器命名为九点控制器。
The fuzzy control is an effective motor intelligent control technique, but there is no simple and intuitive design method.
模糊控制是一种有效的电机智能控制技术，但没有简单直观的设计方法。
To meet the rapid and intelligent requirement of radar fault diagnosis, a design method of radar fault diagnosis system based on improved BP algorithm is introduced.
为适应雷达故障诊断快速化、智能化的要求，介绍了一种基于改进的BP算法的雷达故障诊断系统设计方法。
This paper analyses nonlinear mapping characteristics of cloud model, presents the design method of the intelligent controller based on the structure model, and shows some simulation examples.
文中分析了云模型的非线性映射特性，同时给出了基于此结构模型的智能控制器的设计方法及仿真实例。
This paper presents a method to design an intelligent control program for PLC according to its characteristics. It has been used in the jigging control.
本文依据PLC的控制特点，提出了一种PLC智能控制的程序设计方法，并在跳汰机的控制中得到了应用。
The article discusses the application of the embedded system used in the Ethernet interface equipment. It introduces a design theory and method of Embedded intelligent dual-Ethernet system.
讨论了嵌入式系统在网络接口设备中的应用，介绍了一种嵌入式智能双以太网系统的设计原理和方法。
A general method of intelligent controller design and closed-loop test based on VHDL and FPGA implementation is proposed.
提出了一种基于VHDL描述、FPGA实现的智能控制器设计和闭环测试的一般性方法。
In this paper, we would use fuzzy maths′s principle in large system decision theory and method, design corresponding, mutiuse and intelligent system IDSS.
本文研究了模糊数学原理应用于大系统决策的理论和方法，设计了相应的多用途智能人工化决策知识系统IDSS。
Therefore, doing research about the method of electrical circuit drawing recognition and intelligent design and developing a corresponding CAD system is a significant and valuable work.
因此，研究电气原理图识别与智能化设计方法并开发相应的电气CAD系统是一项非常有意义的工作。
An intelligent heuristic system for conceptual sensor design based on knowledge was proposed through taking sensor effect as knowledge and knowledge engineering as its method.
以传感器效应为知识、知识工程为方法，提出了一种基于知识的传感器概念设计智能启发系统。
The design method of nonvolatile memory based on intelligent controller of circuit breaker was researched.
研究了断路器智能控制器的非易失性存储器的设计方法。
Finally, based on the mathematical model and design method of FGM, an intelligent design system of FGM is developed through computer programming.
最后，基于以上数学模型和设计方法，通过计算机编制程序，开发了一个智能化的FGM软件设计系统。
It is introduced the characteristics of the clustered control system of intelligent charger based on PC and 80c196kc. System hardware principle and design method are expounded.
介绍了以PC机和80C196 KC为核心的智能充电机集群控制系统的特点，详细阐述了系统的硬件原理和设计方法。
By applying man's intelligence, a design method of intelligent variable structure stabilizer for power system was proposed on the basis of variable structure control theory.
依据变结构控制理论并运用人的智能，提出了智能变结构电力系统稳定器的设计方法。
The investigation of automatic and intelligent technology and method is significant to improve the level of mould CAD engineering and the mold design qualities and efficiencies.
研究成型零件的自动化、智能化生成技术与方法，对提高模具CAD技术水平及模具设计的质量与效率具有重要意义。
In this study, a knowledge-based adaptive modeling method is created for clutch design. Accordingly, an intelligent design can be realized based on the adaptive model.
因此提出了一种基于知识的自适应产品模型创建方法，并在此基础上创建离合器自适应产品模型，利用该模型实现离合器智能设计。
The paper presents a new design method based on TMS320LF2407DSP and intelligent PI control for charging and discharging power supply.
介绍了一种基于TMS320LF2407DSP、智能PI控制的新型蓄电池充放电电源的设计方法。
A modal control method and controller design scheme for intelligent mechanically electrically acoustically coupled noise control system is proposed.
提出了机、电、声三相耦合的噪声智能控制系统的模态控制方法，给出了模态控制器的设计方案。
The ANFIS design method is a blend intelligent system which combines the Fuzzy Logic system (FLS) and the Annual Neural Network (ANN) and USES their's strongpoints.
ANFIS设计方法是一种将模糊逻辑系统(FLS)和人工神经网络系统(ann)相结合，利用两者各自的优点所形成的混合智能系统。
The intelligent method based on performance feedback and parameter self-tuning controller based on rules have been proposed, which simplify the design of intelligent fuzzy control algorithm.
提出了性能反馈的智能控制方法和基于规则的控制器参数自调整机制等智能控制策略。并简化了智能模糊控制算法的设计。
In this article the design method of the intelligent pressure measurement instrument and analysis of error arid the application are introduced.
本文主要介绍智能压力测量仪的设计方法、误差分析及应用。
This paper introduces the design method of an automobile test production line's intelligent control system.
介绍了汽车检测线智能化控制系统的设计方法。
The design ideas and method of the intelligent control used for photoelectric tracking and control are described in the paper.
描述了仿人智能用于光电跟踪控制系统的设计思想和方法。
As a newly arising intelligent control method, the fuzzy control method is prompt and precise in control and simple in design.
模糊控制方法作为一种新兴智能控制方式，具有控制快速精确及控制方法设计简单的特点。
The information description methods during conceptual design are discussed in order to put forward the theory and method of the intelligent decision of conceptual design based on TRIZ.
探讨了方案设计中信息的表示方法，提出了基于TRIZ的方案设计智能决策的理论与方法。
The method of optimal intelligent design of NC indexable turning tools is discussed in this paper.
着重讨论数控可转位车刀智能化设计的方法。
This paper presents the control method of a pipe tobacco drying control system and its design involved with the use of a mimic intelligent control technology.
本文给出了烟丝烘干系统的控制策略，利用仿人智能控制实现了烟丝烘干系统的控制，给出了该控制器的详细设计。
应用推荐