Rational cable force can guarantee the structure safety in construction and make the structure's internal force reasonable after construction.
斜拉索的索力合理与否直接决定了斜拉桥施工阶段结构的受力安全和成桥后结构内力的合理分布。
Based on the design load and internal force employed the content of load test is ascertained.
模型的加载测试内容按照原型桥梁设计荷载及使用内力来确定。
The finite element internal force method for calculating arch dam equivalent stress is improved.
本文对有限元内力法求解拱坝等效应力分析方法进行了进一步改进。
The difference of internal force distribution between this floor and waffle slabs is compared and analyzed.
比较分析了该楼盖结构与梁板式楼盖结构的受力差异。
This paper describes the design idea, used technique of the software on internal force analysis of plane trusses.
介绍了平面桁架结构内力分析系统的设计思想、所用技术及其主要功能。
The simplified formulas used to calculate the masonry structure lateral rigidity and internal force are presented.
提出确定底层框架砖房抗震墙数量的简化方法，对砖墙侧移刚度及内力分析提出了简化的实用计算公式。
The ground coefficient method is commonly used for internal force calculation for anti-slide piles and anchor caverns.
工程中常用的抗滑桩和锚固洞的内力计算方法多为地基系数法。
It also has some reference significance for analyzing the internal force of crossing basement and its similar structures.
对于十字交叉基础等类似结构的内力分析也有一定借鉴意义。
Sound judgment of the load transmission relation between them by internal force analysis for correct reinforcement design.
通过内力计算，明确两者之间力的传递关系是正确进行配筋设计的基础。
To learn engineering mechanics and do engineering computation, we must master the drawing methods of internal force diagram.
要学好工程力学，进行工程计算，必须掌握好内力作图方法。
The monitoring results of the internal force and displacement of support structure for a subway deep excavation are analyzed.
对某地铁深基坑支护结构内力与变形监测结果进行了分析。
As to different link schemes, comparative analysis on changes of internal force and displacement after linking was carried out.
对于不同拼接方案，对比分析新旧桥拼接后结构内力及位移的变化情况。
Therefore, the Europeanization of Chinese does not stem from an internal force, but rather originates from an external pressure.
因而，汉语的“欧化”不是起因于一种“内在的力量”，而是源自一种“外在的压力”。
Therefore, the strength check of multi-internal force from the cross-section of bar can be resolved by means of mechanical method.
为此，利用材料力学方法可以解决杆件横截面上存在多个内力的强度计算问题。
A motion law of the disintegrative units is obtained by analyzing the internal force and bending moment of the architectural units.
通过分析建筑物构件的内力和弯矩，得到了建筑物解体时构件的运动规律。
Structural internal force is calculated by changing constant load of the main girder, the cable Angle, the length of unsupported deck.
通过改变主梁恒载重量、拉索倾角、无索区长度等结构参数，分析结构参数变化对结构受力的影响。
This paper introduces a simlpe calculating method, of evaluating any section internal force of circular bent rod effected by even load.
本文介绍了一种求圆弧形曲杆在均布荷载作用下任意截面内力的简化计算方法—等效直杆法。
The results show that steel structure member can be regarded as ideal elastic-plasticity body when analyzing its internal force in fire.
研究结果表明火灾中钢构件内力分析时，可把构件视为理想的弹塑性体；
From the point of internal force and deformation, the influence of girder joint scheme of side span on construction control is discussed.
从受力与变形角度讨论了边跨合龙方案对连续梁桥施工控制的影响。
Because top beam can change internal force and displacement of supporting pile, and both them restrict and correspond each other in space.
因为压顶圈梁可改变支护桩的内力与位移，二者在空间中相互约束，彼此协调。
When actual span D-value of equal section continuous beam in designs is less 10%, equal span chart is employed to calculate internal force.
在设计中当等截面连续梁的计算跨度相差不超过10%时，可用等跨的图表来进行内力计算。
The internal force redistribution will emerge as the core concrete creates creep, which can make the modulus of steel tube and concrete change.
当核心混凝土产生徐变时，会出现内力重分布现象，使钢管和混凝土的模量发生变化。
A practical calculating process of the internal force of flexible piers is put forward, taking into account the influence of concrete cracking.
提出了混凝土开裂影响的柔性桥墩内力的实用计算方法，并编制了程序。
The fundamental reason, nothing more than the earth's surface is subject to two forces, one is the external force, the two is the internal force.
其根本原因，不外乎是地球的表面受了两种力，一是外力，二是内力。
Nowadays, the analysis on internal force of structure is based on the hypothesis of plane system, but it can not solve the problem of stereoscopy.
现阶段在工程结构内力分析中，主要是基于平面体系的假设，并不能完全解决结构的空间性问题。
This paper mainly discusses the structure design, internal force analysis and calculation on strength and rigidity of the conveyor triangle frame.
本文主要介绍该输送机三角形支架的结构设计、内力分析、强度和刚度的计算。
According to theoretic value, some measurements for stress and deformation are adopted to control internal force and figure in a reasonable range.
应力和变形控制中，以理论值为指导，采取各种监测手段，使结构的内力和线形控制在合理范围之内。
According to theoretic value, some measurements for stress and deformation are adopted to control internal force and figure in a reasonable range.
应力和变形控制中，以理论值为指导，采取各种监测手段，使结构的内力和线形控制在合理范围之内。
应用推荐