Able to use welding, lath, milling and drilling machine.
能使用焊接，车床，铣床和钻床设备。
The microstructure of surfacing metal is lath martensite and carbide.
堆焊层显微组织为低碳马氏体和碳化物。
Lath Length: up to 2440 mm or customized according to customer requirements.
板条长度：最长2440mm或按客户要求订做。
They are dislocated lath martensite area and twinned martensite area respectively.
这些微区分别为内孪晶马氏体区和位错板条马氏体区。
Attach metal or gypsum lath to studs or furring using nails, screws, clips or wire ties.
用钉子，螺丝，夹子或电线扎带将金属或石膏板条固定到钉或贴面。
These lath martensite first nucleates in parent austenite intergranular and twin boundary.
应变诱发马氏体首先在原奥氏体晶界和孪晶界形核。
This sensor is embedded in a resin matrix composite lath to detect the change of lath's curvature.
将此传感器埋入树脂基复合材料板内部，测量板的弯曲变形。
Then we work with the plaster and lath to construct the extra sections of wall; this takes a very long time.
随后就把塑胶和木板粘贴到墙上，这要花很长时间。
The result indicated that crack was caused by lath-shape inclusion in the material and high quenching rate.
结果表明，由于材料中存在长条状夹杂物及淬火冷却速度过快导致螺母开裂。
With the increment of Boron content, lath-like bainite is formed, the strength is improved but toughness is weakened.
B有利于形成板条贝氏体组织，B含量增加时，能提高强度，但有损韧性。
Rebar and metal lath are commonly used, and some contractors insist on them for all formations taller than four feet.
钢筋和金属板条普遍使用，一些承包商对他们坚持的身高超过4英尺，各单位。
The result show that the microstructure formed after thermal cycle was mainly lath bainite and granular bainite in CGHAZ .
结果表明：在不同的焊接热循环条件下，焊接粗晶区组织主要是板条贝氏体和粒状贝氏体。
The magnitude and direction of lath martensitic shape strain is firstly measured by a new interference method in this research.
利用干涉显微镜首次测得了板条马氏体形状应变的大小及方向。
The relationship between fracture toughness and notch toughness, tensile ductilities in lath martensite steel has been investigated.
研究了超高强度板条马氏体钢的平面应变断裂韧性与缺口韧性、拉伸塑性之间的关系。
When austenitizing temperature is higher than a critical temperature, full lath martensite can be obtained in medium and high carbon steel.
钢的含碳量越高，获得全部板条马氏体的临界奥氏体温度越高。
The higher the peak temperature, the coarser the grain size of prior austenite, the larger the martensitic lath bundle after phase transformation.
峰温越高，奥氏体晶粒越粗大，冷却后形成的马氏体板条束尺寸也越大。
Experiments show that the dual phase structure suitable to wire drawing consists of fine ferrite islands dispersed in the matrix of lath martensite.
实验表明，适于拔丝的双相组织是在板条马氏体基体上分布着细小的铁素体岛。
The invention relates to a fireproof concrete hollow partition lath which is characterized in that fireproof packing is added in the partition lath.
混凝土防火空心隔墙板条，其特征是隔墙条板中添加耐火填料。
The results show that there are four kinds of carbides in annealed state of the steel, and major portion of quenched martensite is lath-like martensite.
结果表明，该钢退火状态存在四种类型碳化物，淬火组织以板条马氏作为主。
The results show that, typical morphologies of vanadium carbide appears in the shape of sphericity and strip, and chromium carbide appears lump and lath.
结果表明，钒碳化物为球状和条状，铬碳化物为块状和板条状。
By the integration of numerical result and CNC programming, a new method which advances the efficiency at the CNC machining of arced lath tool is provided.
通过数值解和数控编程结合，为圆弧车刀在数控加工中提高加工效率提供了一种新的办法。
At present, it's widely used in the production of steel made furniture, stainless products, theft-proof door, kitchen fitting AD repair welding of wire lath.
目前广泛用于钢制家具，不锈钢制品，防盗门生产，厨房设备及钢丝网片补焊等。
The results show that the quenching microstructure of direct quenching technology consists of lath and twin martensites, and the amount of the latter is more.
结果表明：直接淬火工艺的淬火组织为板条马氏体和孪晶马氏体共存，且孪晶马氏体的含量较多。
After proper heat treatment the steel will have a dual phase structure of austenite and bainite. arranged alternatively in the form of lath ferrite and thin film austenite.
经适当热处理，获得贝氏体铁素体板条与奥氏体薄膜交替排列的奥氏体-贝氏体双相组织。
We can produce all the standard lath, all kinds of standard and non-standard colors, in addition, we will keep a vast of components for industrial doors and fast shutter door.
我们能够推出所有标准板条，并且能够推出所有门板所需的各种标准及非标准的涂层颜色，此外，我们会经常库存大量工业门和快速卷帘门的组件。
In order to look for the reason of a main shaft sinkage in a heavy-duty horizontal lath, a finite element model for the lath's main shaft system is established based on ANSYS.
针对某重型卧式车床主轴下沉问题，基于Ansys软件对其主轴系建立了有限元模型，对主轴系静态性能进行了分析。
The results show that as-annealed microstructure and as-quenched-tempered microstructure of the low carbon high alloy steel added nickel are both single-phase lath martensite.
结果表明：加镍低碳高合金钢无论退火态还是淬火回火态，其组织均为单相板条马氏体；
The paper discusses the twin theory and other theses on the habit plane of the lath martensite, the direction relationship and the relative oriented relationship between laths.
本文对板条状马氏体的惯习面和位向关系、板条间相对取向关系的孪晶学说和其它论点以及板条状马氏体形态模型进行了讨论。
The paper discusses the twin theory and other theses on the habit plane of the lath martensite, the direction relationship and the relative oriented relationship between laths.
本文对板条状马氏体的惯习面和位向关系、板条间相对取向关系的孪晶学说和其它论点以及板条状马氏体形态模型进行了讨论。
应用推荐