Synthesis of epoxy powder coatings low-temperature curing agent and its application;
采用磷酸双氰胺盐作环氧粉末涂料的固化剂、氟化钠作添加剂。
The effects of type, concentration of chain extender, curing temperature and time of silicone sealants with low modulus and high elongation on their mechanical properties were studied.
制备了不同低模量高延伸率室温硫化有机硅密封材料，并考察了扩链剂类型和用量、固化温度和时间对材料性能和交联度的影响。
In the case of high temperature and low fabric volume fraction, the ionic conductivity changes dramatically, which in turn has a significant influence on the resin curing process.
在较高温度和较低纤维含量条件下，离子导电率变化较快，对树脂固化反应的影响较大；
The development of low temperature curing and high temperature serving adhesives in the field of inorganic and elementary organic chemistry in Russia was introduced in this paper.
介绍了前苏联在无机和元素有机化合物领域内冷固化耐高温和超高温胶粘剂方面的进展。
The curing system of a middle-low temperature curable epoxy film adhesive SY-70 was determined by the choices of proper accelerator and its content.
通过选择合适的促进剂及其用量，确定了中低温固化环氧胶膜sy- 70的固化体系。
The experiment results indicated that the complex coating has the advantage of low curing temperature, construction convenient and high mechanics performance and anti-corroding performance.
实验结果表明，所制备的纳米复合涂料具有固化温度低、涂装方便、力学性能及抗腐蚀性优越等特点。
The author introduces the synthetic process of low-temperature rapid curing catalyst ATS for pigment dyeing and printing, and discusses about its performances.
本文介绍了涂料染色、印花低温快速焙固催化剂ats的合成工艺，并对其应用性能作了探讨。
DOVER series low temperature curing adhesives are one part, low temperature heat curable epoxy.
DOVER系列低温固化胶是单组份、低温热固化改良型环氧树脂胶粘剂。
Low viscosity, a room temperature curing amine hardener. Specially formulated filler is recommended for casting of patterns and moulds.
低粘度，室温固化胺类固化剂，特别用于浇铸模具的制作。
A clay sealant is introduced which has many advantages, such as low viscosity, room temperature curing, no cracking, good toughness.
介绍了一种黏度低、室温固化、不开裂、韧性好的密封胶泥。
In this paper, the security of low salty dry-cured meat was studied by using low-temperature, compound curing agent, desiccation, vacuum packing and fermenting maturation technology.
采用低温、复合腌制剂、干燥、真空包装、发酵成熟等工艺过程，进行低咸度腌肉制品安全性研究。
Particularly suited where low curing temperature is required for heat sensitive components.
特别适用于需要低温固化的热敏感元件。
The influence of alkyd resin, selected amino resin and solvents on the low temperature curing and quick drying of amino enamel is discussed.
讨论了合成的醇酸树脂、选用的氨基树脂及溶剂对氨基漆低温快速固化方面的影响。
So after curing, the content of chlorophyll was highest at low temperature and lowest at high temperature;
同样高温模式下烟碱降解最多，含量最低，低温模式下则反之。
Ultral low temperature curing, high gloss.
超低温固化，光泽高，机械性能好。
The influence of the original temperature of mat, high or low, to the time spent to heat the center layer to the curing temperature could be neglected;
板坯初始温度的高低对干法纤维板中心层到达胶粘剂固化温度所需加热时间的影响可以忽略不计；
Phosphate adhesives have many advantages, such as low temperature curing, high shear strength, and excellent electric and heat-resistant properties.
磷酸盐基具有固化温度低，剪切强度高，电性能和耐热性能优异等特点。
It can be quicky cured and resisted high temperature for class H in a short curing time and low evaporation losses.
它耐高温达到H级，固化速度快，贮存周期长，挥发率低。
It can be quicky cured and resisted high temperature for class H in a short curing time and low evaporation losses.
它耐高温达到H级，固化速度快，贮存周期长，挥发率低。
应用推荐