• Manual programming is inefficient when using CNC pipe cutting machine cuts intersection lines with welding groove.

    使用数控切管机切割带焊接坡口的相贯线时,手工编程效率低下。

    youdao

  • This process is applicable to the operation, inspection and acceptance of manual welding of electric products produced.

    本工艺适用于生产的电气产品手工焊接的操作、检验和验收。

    youdao

  • Series ZX3 is designed as DCPower source for manual welding.

    ZX 3系列整流弧焊机系供手工弧焊用的直流焊接电源。

    youdao

  • Traditionally, manual cutting and welding is rough in workmanship and low in efficiency.

    采用传统的手工式切割与焊接不仅工艺粗糙,而且效率也低。

    youdao

  • The experimental results show that the power source meets the requirements presented by the pulse TIG welding. DC TIG welding and manual arc welding, and is a new many functions power source.

    研究结果表明,所研制的焊机可以满足脉冲tig焊、直流tig焊、手工电弧焊三种方法的焊接要求,是一种新型多功能焊机。

    youdao

  • The controlling system has many work patterns, such as manual, semiautomatic, and automatic, and can compensate for the effect of voltage fluctuation to welding current.

    控制系统具有手动、半自动、全自动等工作方式,可自动补偿网压波动对焊接电流的影响。

    youdao

  • Welding methods and technology of narrow gap quirk backing weld were discussed. Indirect quirk backing weld using manual hydrogen arc welding is considered as the best result.

    讨论了窄间隙深槽打底焊焊接方法和工艺,认为用手工氩弧焊进行单面深槽打底焊效果最好。

    youdao

  • A method which can increase power factor and decrease energy consumption of common manual ac electric welding machine is presented.

    介绍了一种解决普通手工交流电焊机功率因数偏低及耗能严重现象的方法。

    youdao

  • The range of cleaning (width) shall not be less than 10mm for manual welding, not less than 20mm for gas shielded welding.

    清理范围(宽度)对于手工焊不小于10mm,气体保护焊不小于20 mm。

    youdao

  • The welding experiment and procedure qualification for manual TIG welding of stainless steel tubes with flux cored electrode is presented in this paper.

    介绍采用药芯焊丝手工钨极氩弧焊焊接奥氏体不锈钢管道所进行的焊接试验及工艺评定。

    youdao

  • The article discusses the automatic and manual feeding concept of the welding machine through analyzing the circuit of the wire feeding system of the CO2 arc welding machine.

    通过对二氧化碳焊机送丝系统的电路分析,论述了焊机的自动送丝和手动送丝原理。

    youdao

  • The national standard is suitable for welded joint of carbon steel and low alloy steel with gas welding (being used for sheet metal), manual arc welding and gas - shielded welding.

    本标准适用于气焊(用于薄板),手工电弧焊及气体保护焊焊接的碳钢、低合金钢焊接接头。

    youdao

  • The manual arc welding normally refers to the manual welding using coated electrode.

    手工电弧焊通常是指采用药皮焊条的手工焊接法。

    youdao

  • There is no automatic welding in many industrial areas of welding, using a large number of methods with manual welding.

    在许多没有实现自动化焊接的工业领域,采用了大量的人工焊接的方法。

    youdao

  • Giving emphasis to the welding materials and welding processes of fully automatic welding and manual welding.

    并重点介绍了采用全自动焊和手工焊的焊接材料及焊接工艺。

    youdao

  • This paper depicts the chemical composition, mechanical performance of X80 line pipes, giving emphasis to the welding materials and welding processes of fully automatic welding and manual welding.

    文章叙述了X80管线钢的化学成分、力学性能,并重点介绍了采用全自动焊和手工焊的焊接材料及焊接工艺。

    youdao

  • The features of manual downhill welding, semiautomatic welding, automatic welding and other welding technologies like butt flash welding and laser beam welding (LEW) and so on are analyzed.

    分析了手工下向焊、半自动焊、自动焊及特种焊等焊接方法的特点,在选择焊接方法时应考虑管道直径、壁厚、管道长度、设计条件、管子级别等因素。

    youdao

  • This article introduces the construction, working theory and typical technology of automatic welding equipment for equal diameter welding tee to solve the low efficiency by manual welding.

    简要介绍了等径焊接三通自动焊的设备结构、工作原理以及典型工艺。

    youdao

  • The method preprocesses power input of manual weld through rough neural networks, and judges lack of weld in a welding process. The system′s hardware is simple, cost is low and judgement is accurate.

    该方法通过人工神经网络对采样的焊接热功输入进行处理,从而判断焊接过程是否漏焊。

    youdao

  • The arc voltage is not easily controlled in manual arc welding, sometimes it is damaged to the quality of welding.

    手工电弧焊的电弧电压是一个难以控制的参数,有时能对焊接质量产生较大影响。

    youdao

  • Complete functions, wide application scope, it features the functions of ordinary DC manual welding and argon arc welding.

    功能多,适用范围广,具有普通直流手工焊及氩弧焊功能。

    youdao

  • The manual welding welded joint inoxidizability surpasses the ultra narrow gap welding joint.

    手工电弧焊焊缝耐腐蚀性优于超窄间隙焊焊缝。

    youdao

  • By using manual arc welding to repair the big kiln circle, the welding process of ZG310-570 super thick cast steel piece was a success, with good running effect observed for more than 5 years.

    通过对大窑轮圈采用手工电弧焊的方法进行修复,成功地解决了ZG310- 570铸钢特大厚件的焊接工艺,经过5年多的运行观察,使用效果良好。

    youdao

  • Therefore, it always has good welding properties when carrying out manual arc welding at different position.

    因此在各种不同位置进行手工弧焊时,均有良好的焊接性能。

    youdao

  • The welding roller carrier can also complement the manual weld or act as a device for detecting and assembling the tube-shaped workpiece.

    本焊接滚轮架还可配合手工焊或作为检测、装配圆筒体工件的设备。

    youdao

  • English Name:Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels.

    简体中文标题:焊接和相关工艺。接缝制备的建议。钢的手动金属电弧焊、气体保护金属电弧焊、气焊、TIG焊接和束焊。

    youdao

  • Equipments for manual arc welding consist of power source, current regulator, electrode holder and cables.

    手工电弧焊的设备包括焊接电源、电流调节器、焊钳及电缆线。

    youdao

  • This paper introduces a manual welding simulant trainer which is developed by the writer in order to provide learners of manual welding an auxiliary training.

    本文介绍了一种由作者研制的手弧焊模拟训练装置,目的在于给手弧焊学习者提供辅助练习。

    youdao

  • The development work done by Wuhan steel with welding material for submerged arc welding, gas yield welding and manual welding of pipeline steel with high performance is introduced.

    介绍了武钢在高性能管线钢埋弧焊、气保焊及手工焊焊接材料开发方面所作的工作。

    youdao

  • Welding, as far as possible using argon arc welding, manual arc welding should be used in small current, fast welding, to avoid the swing.

    焊接时尽量采用氩弧焊接,采用手工电弧焊时应采用小电流、快速焊,避免摆动。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定