The mathematical model for optimization and some analytical results of single- and multi-objective optimization for a variety of twisted blades are also presented in this paper.
介绍了用于最优设计的数学模型，给出了各种流型下径—轴流涡轮的单目标和多目标优化分析的一些结果。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
In the optimization phase, we develop a predictive model for the system to find useful operating conditions through response surface contour plots and perhaps mathematical optimization.
在优化阶段，我们开发了一个系统的预测模型，通过响应面的等高线图或者数学优化，去寻找合适的操作条件。
The mathematical model of optimization design for swing movable teeth drives is set, and the optimization design method is proposed in this paper.
本文建立了摆动活齿传动的优化设计数学模型，提出了优化设计方法。
By using Particle Swarm Optimization (PSO), a model was built up for calculating the optimum dispersion height of intrusive submunition dispenser, and mathematical simulation was carried out.
利用粒子群的优化算法，建立侵彻子母弹最佳抛撒高度的求解模型，并进行了仿真计算。
To express integrated optimization of multiple hubs location and mixed network design, a bi-level programming model was introduced for mathematical models.
为了描述多枢纽选址与混合网络设计综合优化问题，引入了双层规划模型建立数学模型。
In this paper, a mathematical model for integral optimization design of pier shaft and its foundation is given, and the SLP method and duality theory are applied here to have a optimal solution.
本文给出了重力式桥墩与明挖基础整体优化设计的数学模型，选择序列线性规划法，并利用线性规划的对偶理论求最优解。
Based on fully stressed criterion, a mathematical model for spring optimization design has been built. The model is a constrained nonlinear programming problem.
按满应力准则建立了弹簧优化设计的数学模型，它是一个有约束的非线性规划问题。
This paper has set up more comprehensive mathematical model and the detailed research is carried out economic optimization analysis for the whole cold-end system.
建立了较为全面的数学模型，从冷端整体出发，对冷端系统进行经济性优化分析。
With the use of computer technology and optimization method, a mathematical model for DHCR Rolling Program planning has been established and a system of DHCR Roling Program has also been developed.
结合DH CR的特殊要求，运用计算机技术和整数优化的方法，建立了dhcr轧制计划编制的数学模型，在此基础上开发了相应的计算机计划编制系统。
Mathematical model for the optimization has been established in this paper. The design variables, range of design variables, target function and constrain function are confined.
经过比较、分析，建立了优化数学模型，确定了设计变量及其变化范围，以及约束函数和目标函数。
A mathematical model for the optimization of gear dynamic performance is developed and the optimum gear profile modification parameters are then determined by the optimal design approach.
在动态分析的基础上建立了齿轮动态性能优化数学模型，以齿轮动态性能最优为目标，采用优化设计方法，确定最佳齿廓修形量和修形长度。
This paper proposes a new mathematical model and an algorithm for multi-objective optimization of the overall parameters of the most widespread powered support -shield.
本文提出了支撑掩护式液压支架总体参数多目标优化设计的一个新的数学模型和算法。
Mathematical models for pipe diameter optimization and pump station optimization calculation were constructed, solution to model was determined and LINGO optimization software package was introduced.
建立了管径优化与泵站优化计算的数学模型，确定了模型的解法并引入了LINGO优化软件包。
In this article, a mathematical model for data processing was established to reduce the complication in processing the data of parallelism error according to the requirements of optimization method.
针对平行度误差数据处理繁琐的问题，按最优化计算方法的要求，建立了数据处理的数学模型。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
通过对塑件工艺分析的人工神经网络模拟，建立了可供工艺优化计算的数学模型。
So it is necessary to establish the mathematical model of optimization for drilling parameters, which agrees with the drilling conditions.
必须创建与钻井条件相适应的钻井参数优化数学模型。
Appling for liner program method to build mathematical model to solve problem of the productive process, such as, mixing refining crude oil and product optimization.
应用线性规划建立数学模型来解决生产过程问题，即原油混炼、产品优化问题。
In this paper, the optimization of metallurgical industry chain is studied based on technique and economy, and a mathematical model for the optimum utilization of mineral resources is established.
分析研究了冶金产业链的技术经济优化问题，建立了矿产资源最优利用的数学模型。
Traditionally, the mathematical model for the specifications and optimization of spray cooling in continuous casting of steel is based on the effective conductivity model.
通常制定和优化二冷制度的数学模型基础是有效导热凝固模型。
Then the mathematical model for the warehouse management and ship selection was established based on the concept of integrated logistics using optimization theory.
秉承物流一体化的管理思想，运用优化理论建立了件杂货港口的仓库管理和待泊船舶遴选的数学模型；
Based on the principle of optimum design, an optimization mathematical model of forging multi-pieces for saving material has been advanced.
本文根据最优化设计原理，推导并建立了大锻件多件拼锻节材的最优化数学模型。
In this paper, a mathematical model and the selection of optimization method for equal strength optimized design of two-stage straight bevel gear-helical cylindrical gear reducer are introduced.
介绍了两级直齿圆锥—斜齿圆柱齿轮减速器等强度优化设计的数学模型及优化方法的选取。
The mathematical model of two-objective fuzzy reliability optimization design for swing movable teeth drive is put forward. A numerical example is given.
建立了摆动活齿传动的双目标模糊可靠性优化设计数学模型：并给出了计算实例。
A mathematical model for an ovoid spiral scanning system with airborne laser for underwater object detection is developed and a scheme for dot matrix uniformity optimization is proposed.
建立了机载激光水下目标探测中的卵形螺旋线扫描系统的数学模型，提出了点阵均匀性优化方案。
Based on the concept of economic voltage expenditure, the unified mathematical model is established for the optimization of wire cross - section in the distribution network.
本文以经济电压损耗概念为基础，建立了配电网导线截面最优选择的统一数学模型。
Basing on this foundation, a mathematical model for exploitation scale decision of optimization which consider Environmental Risk is established.
在此基础上，建立了水利水电工程考虑环境风险的开发规模优选模型。
An improved Ant Colony Algorithm (ACA) is presented that can be used to search shortest grinding path for the grinding machine and the grinding path optimization mathematical model is given.
提出一种适用于钢坯修磨轨迹优化问题的改进蚁群算法，给出一种修磨轨迹优化问题的实用数学模型。
Based on the combination of the reliability design and optimization design, the mathematical model was created for the optimization-reliability design of the reducer to minimize its volume.
在将可靠性设计方法与优化设计方法相结合的基础上，建立减速器以体积之和为最小的可靠性优化设计的数学模型。
Based on the combination of the reliability design and optimization design, the mathematical model was created for the optimization-reliability design of the reducer to minimize its volume.
在将可靠性设计方法与优化设计方法相结合的基础上，建立减速器以体积之和为最小的可靠性优化设计的数学模型。
应用推荐