The preparation of PLZT ceramics via mechanical alloying was studied.
研究了机械合金化制备PLZT陶瓷。
The characteristic of amorphous phase synthesized by mechanical alloying(MA) was reviewed.
简述了机械合金化（MA）制备非晶的特征。
The mechanisms of mechanical alloying and modeling of mechanical alloying were introduced.
介绍了机械合金化的原理和描述机械合金化过程的理论模型。
Nanostructured bulk of W-Cu alloy was prepared by mechanical alloying and hot pressed sintering.
在真空电炉中利用机械合金化和热压烧结法制备出纳米晶块体钨铜合金。
The mechanism, equipments and feature of mechanical alloying technology were introduced briefly.
综述了机械合金化的原理、设备和特性及其对材料的影响。
Mechanical Alloying(MA)process has attracted extensive attention since it was developed in the mid-1960s.
自60年代中用以来，机械合金化日益引起广泛注意。
The theory and process of mechanical alloying were described and the adopted apparatuses were introduced.
描述了机械合金化的过程和机理，并对机械合金化采用的设备进行了介绍。
Mechanical alloying is one of the most potential method in the preparation and science research of amorphous alloy.
机械合金化是一种通过高能研磨实现的固相粉体加工技术。
The effect of stored energy produced by mechanical alloying on the solid state sintering was analyzed in this paper.
分析了机械合金化过程中粉体能量储存对固态烧结过程的影响。
In addition, a number of factors in the mechanical alloying and the limitation of this process are explained in detail.
另外对影响机械合金化过程的因素以及该工艺存在的缺陷进行了阐述。
The paper indicates that adopting reactive mechanical alloying method, adjusting constituents of hydrogen storage alloys a…
指出采用反应机械合金化法、储氢合金组元调整以及添加催化剂是改善性能最有效的途径。
Two new fabrication technology, Self-propagating High-temperature Syntheses (SHS) and Mechanical Alloying (MA), were widely applied in the field of material science.
自蔓延高温合成（SHS）和机械合金化（MA）是两种制备材料的新技术，在材料领域有广泛的应用。
The formation mechanism of polymer solid alloy and the theoretical model of alloying process were discussed based on mechanical alloying and mechanochemical principles.
以机械合金和力化学原理为基础，讨论了高分子固体合金的形成机理和合金化过程的理论模型。
The brief mechanisms of mechanical alloying are reviewed. The mechanisms of preparing amorphous, nanocrystalline and supersaturated solid solution materials are also reviewed.
阐述了机械合金化的基本原理，金属粉末机械合金化形成非晶、纳米晶和超饱和固溶体的基本机理。
The new PM technology has been introduced, such as superfine powder manufacture, rapid solidification processing, mechanical alloying, liquid phase sintering, rapid consolidation etc.
本文叙述了新的PM技术如超细粉制造技术、快速凝固制粉技术、机械合金化技术、液相烧结技术、快速固结技术等。
Powder contamination and the way of avoiding and minimizing it are discussed. Finally, it presents the key problems and predicts the developing trends in the mechanical alloying field.
探讨了粉体污染问题及避免和降低最小影响的办法，最后提出开发该技术亟待解决的关键问题，对其应用和发展趋势作了展望。
The method making powder by mechanical alloying is brought forward. Getting CuCr alloy by explosive sintering and thermal diffusion disposal are studied some primary experiments were done.
提出了采用机械合金化制粉，进而进行爆炸烧结和后续热扩散处理的制取铜铬合金的方法，并初步进行了实验研究。
The above requirement can be attained by the refinement of the granule and the crystalline grain, surface activation and store-energy effect obtained during the process of mechanical alloying.
利用机械合金化过程产生的颗粒细化、晶粒细化、表面活化及储能作用可以达到上述要求。
In this paper, the mechanisms, processing and characteristic of mechanical alloying (ma) are briefly reviewed, and the progresses of the electrical contact materials prepared by ma is described.
介绍了机械合金化技术的基本原理、工艺过程及其特点，阐述了机械合金化(ma)制备电触头材料的研究进展。
The experiments showed that RE-containing inoculant not only increased mechanical properties of piston rings, but also reduced the consumption of alloying elements and cost of production.
试验结果表明，采用稀土复合孕育剂，不仅可以提高活塞环的机械性能，而且可以减少合金元素用量，降低生产成本。
The effect of infiltration process on the microstructure and properties of iron-base materials with high alloying elements content was studied by metallography, SEM and mechanical property tests.
采用光学显微镜、扫描电镜观察和力学性能测试研究了熔渗处理对高合金铁基材料显微组织和性能的影响。
In this paper, enhancing the burning point and improving the corrosion resistance and the mechanical property of magnesium and magnesium alloy with the method of alloying are introduced.
论述了采取合金化的途径，提高镁及其合金的燃点，改善镁及其合金的耐蚀性以及力学性能。
A alloy with excellent mechanical properties and wear resistance has been developed by optimizing alloying elements on ZA27 alloy basis.
在ZA27合金的基础上，通过合金元素的调整和优化，研制了一种具有优良力学性能和耐磨性能的锌基耐磨合金。
Effects of the alloying elements on the heat-treatment process, microstructure and mechanical properties of a novel gun steel combined with high strength and toughness were investigated.
研究了合金化元素对新型高强韧炮钢的热处理制度、显微组织和力学性能的影响。
The SM master alloy was used to add high oxygen affinity elements Mn and si into the sintered steel as alloying elements to improve the mechanical properties.
通过添加硅锰母合金，将硅、锰这两种对氧亲和力较高的元素加入到烧结钢中，以改善烧结钢的力学性能。
Relationship between microstructure of pearlitic rail steels and mechanical properties, and the effects of alloying elements are subject, which people have always been studying.
珠光体钢轨钢的组织与性能之间的关系、合金元素的作用机理一直是人们不断研究的课题。
Influence of the alloying elements, especially Ag addition on the properties of typical Mg alloy ZM5 is studied in order to improve mechanical and cast properties of Mg alloy.
为了提高镁合金的力学性能和铸造性能，试验研究了典型镁合金zm5的各组元对性能的影响，特别研究了添加金属银对性能的改善。
The influence of alloying and spheroidization process on microstructure and mechanical properties of UHCS is investigated.
研究了合金化和球化工艺对超高碳钢组织和性能的影响。
The results show that alloying elements and rare earth can refine grain, change carbide morphology and distribution, and increase mechanical properties and wear-resistant properties.
结果表明，合金元素能够细化晶粒，改善碳化物的形貌和分布，提高力学性能和耐磨性。
The results show that alloying elements and rare earth can refine grain, change carbide morphology and distribution, and increase mechanical properties and wear-resistant properties.
结果表明，合金元素能够细化晶粒，改善碳化物的形貌和分布，提高力学性能和耐磨性。
应用推荐