A nonlinear mechanical model of grape was constructed.
建立了葡萄的非线性力学模型。
Utilized general FEM software ANSYS to establish mechanical model and solve.
并利用通用有限元软件ANSYS建立其力学模型并求解。
Based on structural dynamic theory, the resonance mechanical model is established.
根据结构动力学理论，建立了边坡共振的力学模型。
These results can be used as the basis of setting up mechanical model of PUR foam plastics.
这些结果可以作为建立PUR泡沫塑料力学模型的基础。
Three types of four-parameter strength criterion based on new mechanical model are proposed.
在新的力学模型上建立了三种类型的四参数强度准则。
This theory is completely abstract instead of being based on a more or less mechanical model.
这个理论完全是抽象的，而不是建立在多少有点机械的模式上。
This article analysed the loads of the drum brake and built the key brake's mechanical model.
通过对鼓式制动器的受力分析，建立了其关键受力部件的力学模型。
Using the equivalent mechanical model, this paper investigated multi-tank liquid sloshing problem.
用等效力学模型法研究了多腔体充液晃动问题。
According to the load condition of tower under the wind and ice storm, the mechanical model was modified.
根据塔设备实际载荷情况，修正了暴风雪情况下工作载荷的力学模型。
Taking account of motor rotating speed fluctuations, a system equivalent mechanical model is established.
考虑电动机转速的波动，建立了系统的等效驱动力学模型。
The vibration mechanical model of gantry and bridge crane is established by means of structural analysis.
通过对门桥式起重机的结构分析，建立了其振动力学模型。
In this paper, some opinions in the mechanical model for saturated soils with isolated pores are discussed.
对孔隙相互孤立饱和土体的弹性力学模型的部分观点进行了讨论。
Casing, cement and formation plane strain mechanical model are established, considering casing with initial ovality.
针对套管的不同初始椭圆度建立了套管、水泥环、地层平面应变力学模型。
According to the simplified mechanical model, it can be calculated by the principle of structure dynamics and methods.
依据简化的力学模型，按照结构动力学原理和方法计算其反应。
Mechanical model of the drill carriage with rotation and vibrating hammer for the new type taphole drill is established.
建立了新型开铁口机电动钻冲机构的力学模型，计算了它的固有频率和主振型。
Based on the analysis on all kinds of load while the pump valve is working, we establish the corresponding mechanical model.
对泵阀工作时的各种载荷进行了分析，建立了相应的力学模型。
Use a mechanical model including springs, dashpots and concentrated masses to simulate muscle tissue or a boundary condition.
用机械模型包括弹簧、阻尼器和集中品质来类比肌肉组织或临界条件。
This paper analyzed the practical situation of drilling string lateral vibration during drilling, established mechanical model.
文章针对钻井工程中钻柱横向振动的实际情况，建立力学模型。
According to this mechanical model, the properties of compression-relaxation and compressive creep were discussed theoretically.
根据该力学模型，从理论上分析讨论了地毯的压缩松弛性能和压缩蠕变性能。
The mechanical model used to calculate this deviation angle of fault yields results which agree essentially with the observation.
并提出一个力学模型，计算了断层扩展角，计算结果与观测事实比较吻合。
As an example of large sized structural component, the mechanical model of load calibration test of an airplane wing was analysed.
以飞机机翼等大型结构为例，探讨了大型结构部件载荷标定试验的力学模型。
The contact zone between roller and workpiece and its contour's definition are the cruxes of establishing the FEM mechanical model.
在建立筒形件强旋有限元力学模型过程中，旋轮与工件接触区及其边界的描述是重要的一环。
The mechanical model of spherical node of coal pipelines of blast furnace is built. Its boundary conditions and loads are presented.
建立了高炉炉顶煤气管道球形节点力学模型，提出了边界条件和载荷的处理方法。
Based on the geological background and mechanism, mechanical model of buckling failure for the consequent slope is given in this paper.
本文根据顺层边坡的地质背景及力学作用机制，抽象出了顺层边坡溃屈破坏的力学模型。
A mechanical model for the offset-axes pendulum drill assembly (OAPDA) was established according to the continuous beam theory and the d.
运用纵横弯曲连续梁理论和达朗伯原理，建立了偏轴钟摆钻具组合动力学分析模型。
The taking-off process in springboard diving motion is analyzed in this paper on the basis of mechanical model of diver/springboard system.
基于人-板系统的数学模型分析跳板跳水起跳阶段的各个过程。
Based on tetranucleotide parameters, a statistical mechanical model was suggested to analyze the flexibility of the Escherichia coli genome.
基于四核苷酸参数提出一个统计力学模型用于分析大肠杆菌基因组柔性。
By using the elastoplastic finite element method, mechanical model for wear tension and internal pressure resistance of casing joints is set up.
采用弹塑性有限元方法，建立了套管接头磨损拉伸与抗内压的有限元力学模型。
The computation examples prove the reasonableness and effectiveness of the mechanical model and the computational methods presented in the paper.
通过算例，证明本文提出的力学模型与计算方法的合理性与有效性。
This paper proposes, for the first time, a simplified mechanical model in an attempt to treat the motion of a cell sliding into a two-dimensional slit.
本文首次提出一个简化的力学模型，试图探讨细胞挤入二维狭缝的运动特性。
应用推荐