Local discharging would damage the metallized layers, dielectrics and metal-coating terminals of the metallized film capacitors; therefore, reduce their life.
局部放电现象会给金属化有机薄膜电容器的金属化层、介质及喷金端面产生不良影响,影响电容器寿命。
When the metal coating is punctured or scratched, the capsules in the damaged area burst and ooze restorative liquids, in the form of compounds called trivalent chromates.
当金属的覆盖层受到扎刺或划损时,受损区域的胶囊将会破裂并渗出具有恢复性的液体- - -三价铬钝化化合物。
A metal-polymer coating can heal its own scratches by liquefying when exposed to UV and then resolidifying.
一种金属聚合物的涂层能够在有紫外线照射的情况下液化,从而修复表面的划痕,一旦不再照射,就重新固化了。
Melosh's group figured out that by coating a piece of semiconducting material with a thin layer of the metal cesium, it made the material able to use both light and heat to generate electricity.
Melosh的研究小组发现用薄层的金属铯覆盖在一片半导体材料上,能够使材料同时利用光和热能来产生电力。
The insulating property of coating influences the scopes and lives of metal cores, and has an important effect on the quality of casting.
涂料隔热性能的优劣不仅影响金属型芯的使用寿命及范围,而且对铸件质量有着重要的影响。
The compound coating of metal and ceramics is prepared on the surface of carbon steel by combustion synthesis technology.
利用燃烧合成技术,在碳钢表面上制备了金属陶瓷复合涂层。
Steel surface should be no visible oil, dirt, scale, rust and paint coating and other attached objects, the surface should be showed homogeneous metal color.
钢材表面应无可见的油脂、污垢、氧化皮、铁锈和油漆涂层等附着物,该表面应显示均匀的金属色泽。
The service life is short when normal anticorrosive coating is used on petrochemical equipments, metal and nonmetal frames and structures to prevent corrosion.
石油化工设备、金属和非金属框架及结构,采用常规防腐涂料防腐,使用寿命短;
Particulate mineral materials comprising at least one coating comprising at least one metal compound are disclosed.
公开了包括含至少一种金属化合物的至少一种涂料的颗粒矿物材料。
The key basic technology in full mould casting process includes: material and formation of pattern, coating, vibratory fill of moulding sand as well as molten metal filling.
实型铸造法的关键基础技术包括:模样的材料及成形、涂料、型砂的振动充填、金属液的充填。
The test probe is also applied through openings in earthed metal enclosures having a nonconductive coating such as enamel or lacquer.
试验探棒还需穿过在表面覆盖一层非导电涂层如瓷釉或清漆的接地金属外壳的开口。
A gap or void in the coating of a pipe or in paint on a metal surface.
在管子覆盖层或金属表面涂漆层上有漏涂点或裂缝。
The invention comprises metal nanoparticles and surfaces treated with a metal nanoparticle coating.
本发明包括金属纳米颗粒和用金属纳米颗粒涂层处理的表面。
Conventional CVD coating process requires a metal compound that will volatilize at a fairly low temperature and decompose to a metal when it contacts with the substrate at higher temperature.
常规的化学蒸发沉淀涂层工艺需要一种容易在相当低温度下挥发并且在较高温度下与基体接触时能分解成纯金属的金属化合物。
In Lost foam process, liquid metal crushing coating is the important cause of metal seeping defects.
金属液压溃涂层是消失模铸造中渗金属缺陷形成的最重要原因。
Corrosion resistant coating and fitting materials and their technologies for metal structures were analyzed for the purpose of prolonging service life of metal structures.
为延长金属结构的使用寿命,对金属结构防腐蚀涂装材料及工艺进行分析。
Emphasis is given to the methods of on site coating large metallic container and a newly developed coating technique on metal plastic composite film.
介绍了对大型金属容器现场涂敷的方法以及关于金属-塑料复合膜的新技术。
The pore distribution of metal coating activated carbon fibers were analyzed by HK, BJH and Dubinin theories from the nitrogen adsorption isotherms measured by auto adsorption meter.
采用吸附仪测定了所制负载金属活性碳纤维的吸附等温线,然后用不同理论方法对孔径分布进行表征分析。
Glassed steel reaction vessel is a sort of equipment for chemical engineering by coating a glass lining on metal body.
搪玻璃反应釜是一种由玻璃衬层和金属基底材料复合在一起的化工设备。
By adding magnesium powder into the coating of electrode, the sulphurs removal in deposited metal was satisfactory.
通过理论分析及实验,探讨了手工电弧焊焊条药皮中添加金属镁粉的脱硫效果。
This has been found to be necessary to compensate for the difference in thermal expansion between the metal coating and the plastics substrate.
人们发现,这对补偿金属镀层和和塑料基体间的热膨胀差很有必要。
The zinc plating could be used as bottom of chemical nickel plating and could deposit other protecting decorating metal coating layer on it.
所得锌镀层可 以作为化学镀镍的底层,也可以在其上沉积其它防护装饰性金属镀层。
In addition, the flat metal coating will not be scratched with the probe, so that the conducting plate has long service life and good experiment effect.
另外,金属镀膜平整度好,且不会被探针划伤,因此,导电板的使用寿命长,实验效果好。
For example, as for coated screw, the coating and the core metal are two homogeneous materials.
例如带有镀层的螺钉,镀层和内部金属为两种均质材料。
No metal tools or heavy objects shall be permitted to come into contact with the finished coating.
不得使用金属器械或者重型机械接触涂层表面。
The results indicate that the ceramic coating films increase drastically the lifetime of the substrate metal in corrosive media and oxidizing atmosphere.
分析试验结果表明,这些陶瓷涂层大幅度提高了基底金属在腐蚀介质及氧化环境中的寿命。
The coaxial, double inverse rotation of the centrifuging sprayer and the metal mould can make the coating more uniformly.
离心头和金属铸型的同轴反向双重旋转,使涂层更加均匀。
The influence factors such as the hydrogen content in weld metal, the hydroscopicity in electrode coating and the toughness of weld metal of basic electrodes are studied.
研究了碱性焊条工艺性的影响因素,探讨了焊缝金属的含氢量、焊条药皮的吸湿性、焊缝金属的强韧化特性等。
The influence factors such as the hydrogen content in weld metal, the hydroscopicity in electrode coating and the toughness of weld metal of basic electrodes are studied.
研究了碱性焊条工艺性的影响因素,探讨了焊缝金属的含氢量、焊条药皮的吸湿性、焊缝金属的强韧化特性等。
应用推荐