This paper introduces the working theory of a TP-801 simple board microprocessor control system for lathes.
本文介绍了采用TP-801单板机控制车床的工作原理。
The device's core is an arc suppression coil with changeable magnetizing current controlled by a microprocessor control system.
装置的核心部分是调励磁式消弧线圈和微机控制系统。
This paper is concerned with the working principle, regulating behaviour, testing parameters, estimation model and controlling accuracy of microprocessor control system of glass melters.
本文介绍了玻璃熔窑微机控制系统的工作原理、调节功能、检测参数、检测方式及控制精度。
The paper is based on research and development of locomotive logic control unit and locomotive distributed microprocessor control system, which are subsystems of locomotive control system.
论文是基于机车控制系统的子系统“机车逻辑控制单元”和“机车分布式微机控制柜”的开发研究展开的。
For the problem of voltage compensation, the design of microprocessor control system used in voltage compensation controlled voltage output availably, and the stabilization of the system is increased.
针对电压补偿问题，研究以嵌入式微处理器为核心的智能电压补偿器，有效地控制了输出电压，提高了设备的可靠性。
This paper describes a single chip microprocessor control system of automatic electrothermal film water boiler and discusses some problems in the design of hardware and software of the control system.
介绍了全自动电热膜沸水器单片机控制系统，讨论了控制系统硬件与软件设计有关问题。
This paper puts emphasis on the principle of using microprocessor to control SCR for the adjustment of alternating voltage, and on the hardware system and the flowchart.
本文着重阐述采用微处理器控制SCR交流调压的工作原理，系统的硬件组成及程序框图。
Constructed a control system of the electric stove with constant flow based on EPEC 3g microprocessor for the electric stove in the electromagnetic roll-casting system.
针对电磁铸轧系统中的电加热炉，采用了EPEC3g系列微处理器建立了电加热炉恒流量控制系统。
This topic use the embedded microprocessor to be responsible to control the entire communication card system, thus processing speed is effectively enhanced.
课题采用嵌入式微处理器负责控制整个通信板卡系统，从而将接口处理速度有效的提高了。
The control system of family computer embroider machine mostly adopts a single slice microprocessor, expanding to save more pattern data through external system memory.
家用电脑绣花机的控制系统大多是采用单片微处理器，通过系统内存扩展来存储更多的花样数据。
The Paper introduced a weighing and mixing control system which is comprised of microprocessor and programable controller.
本文介绍一种由微机结合可编程序控制器组成的称量、混合控制系统。
Automation: Microprocessor controlled optical bench, digital speed control, automatic gain selection, advanced system check, automatic power saving mode.
自动化：微处理器控制光学台，数字化动镜控制，自动增益选择，高级的系统诊断，自动节电模式。
The control system of this inverter is composed of 8098 single chip microprocessor and the new type three phase PWM IC SLE4520.
采用了以8098单片机和三相高频可编程脉宽控制器SLE4520为核心的控制系统。
The distributed control technology is used in this system and every node is based on embedded microprocessor.
群控系统采用分布式控制，各节点以嵌入式微控制器为核心，实现电梯群控系统的硬件系统。
By use of MCS-51 chip microprocessor, it can fulfill the tasks, such system control and management, programmable control communication and continuous regulation of voltage with high accuracy.
该系统采用了MCS - 51单片机实施系统控制与管理、电压连续调整、通讯程控等功能，因而精度高、自动化功能强、使用方便。
The microprocessor based control provides intelligence to gather and process information about system defrost requirements.
微机控制，智能收集和处理系统除霜信息。
This paper presents the design and actual circuit of a computer control system for the North-Seeker with ARM7 (here LPC2292 is used) as core microprocessor and the flexible gyro as sensor.
介绍了一种以arm7单片机(选用LPC 2292)作为核心处理器，以挠性陀螺为传感器的寻北仪方位角-数字转换系统设计及实现电路。
Ac asynchronous motor closed circuit vector's control system with former microprocessor is characterized by low speed and inaccuracy.
传统的微处理器对交流异步电机矢量控制，存在着速度和精度的缺陷。
On the hardware, this system used S3C2410 which based on ARM920T as the core microprocessor, in order to realize the function of data processing, control touch screen's movement.
本系统在硬件上采用基于ARM920T内核的处理器S3C2410作为核心处理器，以实现后端数据处理，并控制触摸屏的相关动作。
Servo system combines the electrical motor theory with modern power electronics technique, sensor techniques, microprocessor techniques and advanced control theory.
伺服系统是电机制造技术、检测技术、电子电力技术、微处理器和现代控制技术相结合的产物。
Microprocessor control with 4 lines LCD display. Friendly and intuitive operating system.
微处理器控制，4行字符lcd显示，友好直观的操作系统。
The built-in Microprocessor system can control the luminous intensity and adjust the luminous mode to realize the combination of light and art.
内置微处理系统可以控制发光强度，调整发光方式，实现光与艺术结合。
The topic discussed in this article is how to organize a microprocessor based system which is intended to implement the automatic computation of shooting track and then to control the fire system.
本文探讨的问题是如何以微处理机为核心设计一个微型机系统来实现坦克火控系统弹道计算机的综合控制功能。
Combined with the properties of industrial control, a practical verified scheme of microprocessor system is proposed. Hardware configuration and software organization are described.
在此基础上结合工业控制的特点提出一种经过验证的实用多重微处理器系统方案，并对它的硬件配置和软件组织原则作了介绍和讨论。
The hardware circuit of control system and the flowchart of main control program for software were designed by using PIC single chip (microprocessor).
以pic单片机为核心设计了控制系统的硬件电路和软件流程。
These control ICs greatly simplify the system design and lower system cost by integrating the commutation logic on-board, which lessons the burden on the system microprocessor.
上述两种控制IC集成了整流逻辑，减少了系统微处理器的负载，从而大大简化了系统设计，降低了系统成本。
By the end of debugging, this system achieves to the control of LCD Display system by ARM microprocessor.
最终通过对系统的调试，实现了ARM微处理器系统对LCD液晶显示器的显示控制。
Linear temperature control system in TSC measurement has been developed by using microprocessor.
利用单板机完成了TSC测试中的线性升温控制系统。
A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.
针对磁放大器式电源埋弧自动焊机设计了单片机控制系统。
To improve BLDCM control result, this paper establishes a full digital double closed loop system which USES microprocessor-TMS320LF2407A to control the communication and speed of BLDCM.
为了提高无刷直流电机的控制效果，运用TMS320 LF 2407 A芯片，建立了无刷直流电机全数字双闭环控制系统，给出了硬件电路设计和部分软件编制方法。
应用推荐