Two control modules are motion control module and pattern recognition module .
两个控制模块分别为：运动控制模块和图像识别模块。
A design scheme of motion control system based on parallel port of computer was proposed.
提出了一种基于计算机并行口的运动控制系统的设计方案。
So we can apply our knowledge of digital power and motion control to enhance their success.
因此，我们可以申请我们的数字电源和运动控制的知识，提高他们的成功。
A design of the open motion control system based on PC and motor control card was presented.
提出一种基于PC和运动控制卡的开放式运动控制系统的设计方案。
Not only this, Motion Control with its wide voltage range can be used anywhere in the world.
另外，运动控制驱动器具有很宽的电压使用范围，这使得它能够在世界各地使用。
The practice proves that this board can satisfy require of motion control on precision and speed.
实践表明该控制卡能满足运动控制部分的精度及速度要求。
In motion control system, interpolation calculation and tracking control are hard real-time tasks.
在运动控制系统中，插补计算与跟踪控制算法是强实时任务。
Curtiss-Wright's Motion Control segment provides embedded computing technology for military applications.
Curtiss - Wright公司的移动控制部负责提供军事应用上的嵌入式计算处理技术。
The motion control card is extensively applied in the high-level control unit of the motion control system.
运动控制卡是可以广泛应用于运动控制系统的上位控制单元。
The stator flux-oriented direct torque control is widely used in high performance motion control of induction motors.
定子磁场定向的直接转矩控制逐渐被广泛应用于高性能异步电机调速系统。
Motion control system of an ultra precision wafer stage with application to integrated circuit production was presented.
描述一种应用于集成电路制造的超精密硅片台系统及其运动控制。
The sole also incorporates other technical features designed to absorb impact while providing motion control for the foot.
鞋底还包含其他技术特性，能吸收冲击力和控制脚部的运动。
The technologies of intelligent mobile robots involve robot navigation and localization, path planning, motion control, etc.
智能移动机器人技术涉及到机器人导航与定位，路径规划，运动控制等。
In this paper we design a fuzzy self-tuning controller which can be used in motion control of oceanic dynamic positioning systems.
本文设计了一个用于海洋动力定位系统运动控制的模糊自适应控制器。
Microprocessor, dedicated motion controller and driver, optical electronic encoder were used to realize servo closed-loop motion control.
采用微处理器、专用的运动控制和驱动芯片以及光电编码器实现了机器人关节的伺服闭环运动控制；
Curtiss-Wright's Motion Control segment will provide the equipment from its Embedded Computing facility in Trondheim, Norway, over the next year.
Curtiss - Wright公司的移动控制部将在未来一年内从其设在挪威特隆赫姆的嵌入式计算设备中心提供该装备。
So instead of developing the skill of movement, they proposed "protection" through all kinds of cushioning, stability, motion control, etc., shoes.
因此，他们鼓吹通过各种诸如缓冲、稳定或者动作控制等等的跑鞋，来提供“保护”，而不是在动作上提高技巧。
Today, the PLC is no longer confined to the logic control, motion control, process control and other fields has also played a very important role.
今天，该公司已不再局限于逻辑控制，运动控制，过程控制及其他领域也发挥了非常重要的作用。
Because of the high calculation complexity of motion control, computers and control-cards have been used in most traditional motion control systems.
由于对运动的控制计算量相当之大，因此传统的控制系统大都采用计算机与控制板卡实现。
It is proved by the experiment that the control card has good real-time performance and stability, which can meet the requirements of motion control.
实验证明，该运动控制卡运行稳定、实时性好，能满足运动控制的要求。
In addition, the air cushion is used to provide a powerful motion control system to stabilize the T-Craft during cargo transfer operations at the sea base.
另外，气垫也被用来提供强有力的运动控制，以使t - Craft在海洋基地运输过程中保持稳定。
In order to improve the performance of networked multi-axis motion control systems, the clock synchronization method of motion control networks was studied.
为了改进网络化多轴同步控制系统的性能，研究了运动控制网络的时钟同步方法。
Multi-axis coordinate control strategy is the core of the multi-axis motion control system. It influences performances of the motion control system directly.
多轴协调控制策略是多轴运动控制系统的核心，它直接决定了运动控制系统的性能。
Permanent magnet synchronous motor (PMSM) step motion control for the electric actuator is a new actuator control system adopted incremental motion control theory.
永磁同步电动机步进控制的电动执行器是采用增量运动控制理论研制的新一代执行器控制系统。
Motion control is an important branch of automatic control, and it has got extensive application because of its precise control for motion track and moving velocity.
运动控制是自动控制的重要分支，由于它能够实现对运动轨迹与运行速度的精确控制，因此运动控制系统在各类控制工程中有着广泛的应用前景。
Significance of high_speed and high_precision motion control of CNC system is introduced, disadvantages and shortages or traditional CNC motion control are analyzed.
介绍了数控高速高精运动控制的重要意义，分析了传统数控运动控制方式的缺陷和不足。
Significance of high_speed and high_precision motion control of CNC system is introduced, disadvantages and shortages or traditional CNC motion control are analyzed.
介绍了数控高速高精运动控制的重要意义，分析了传统数控运动控制方式的缺陷和不足。
应用推荐