Based on the advanced nonlinear finite element analysis software MSC.
以大型非线性有限元软件MSC。
In this paper, a nonlinear finite element analysis of plate - truss composite steel girder is studied.
对板桁组合钢梁进行非线性有限元分析。
This paper presents the study on the bearing capacity of bridges based nonlinear finite element analysis.
本文对基于非线性有限元软件的桥梁承载力预测技术进行了研究。
A 3-d static and dynamic linear elastic and nonlinear finite element analysis is made on Guandi Gravity Dam.
对官地混凝土重力坝进行了三维静动力线弹性和非线性有限元分析。
A nonlinear finite element analysis of 4 RC deep flexural simply supported beams with the program VT2 is presented.
使用基于扰动应力场模型的非线性有限元程序VT2分析了4个深受弯简支梁的受力性能。
The nonlinear finite element analysis model of the reinforced concrete structure of the common use is stated briefly.
简述了钢筋混凝土结构非线性有限元分析的常用模型。
Nonlinear stiffness characteristics of an air spring were analyzed (FEA) by a nonlinear finite element analysis package.
应用abaqu S非线性有限元分析软件，对空气弹簧进行有限元建模，计算其静态刚度特性。
Nonlinear finite element analysis, including 27 gap K-joints with square and circular hollow sections, has been carried out.
对27个主方支圆间隙K型相贯节点进行了非线性有限元分析。
ABAQUS is the advanced general nonlinear finite element analysis software, which has very obvious advantage in solving nonlinear problem.
ABAQUS是先进的大型通用非线性有限元分析软件，求解非线性问题时具有非常明显的优势。
The nonlinear finite element analysis theory and method for the suspension bridge with concrete stiff girder was studied in the chapter 4 and 5.
第4、5章研究含混凝土加劲梁的悬索桥非线性精细计算理论、计算方法。
The nonlinear finite element analysis and model analysis for working mechanism are performed, and its result is validated by on-site strength test.
最后对该有限元分析模型的分析结果进行了生产实践强度的试验验证。
According to nonlinear finite element analysis, the ultimate load-carrying capacity of tensegrity system is discussed based on the buckling of struts.
本文根据非线性有限元理论研究讨论基于压杆失稳的张拉整体结构极限承载能力。
By using ABAQUS software package, this paper has done the 3-d nonlinear finite element analysis on the performance of cover plate connection under monotonic load.
采用通用有限元软件ABAQUS，对梁柱盖板连接在单调荷载作用下的受力性能进行了三维非线性有限元分析。
The results show that the plate strip influences the shear resistance of walls lightly based on a detailed parametric study using nonlinear finite element analysis.
对墙体进行了参数分析，结果表明：墙体的横向钢带拉条对墙体抗剪承载力影响不大；
Nonlinear finite element analysis of 1:10 advanced nuclear power plant prestressed concrete containment model structure subjected to internal pressure is carried out.
对先进核电厂预应力混凝土安全壳1：10模型结构进行了内压作用下的非线性有限元分析。
The Nonlinear Finite Element Analysis was applied to study the stress and modal of an air spring, which is composed of composites with multiple orthotropic materials.
运用非线性有限元分析技术，对由多层正交各向异性复合材料组成的某型空气弹簧进行了应力和模态分析。
Nonlinear finite element analysis for 3d-frames with special-section columns is presented considering the frame features such as irregular cross-section of the columns.
针对空间异形柱框架具有柱横截面不规则等特点，提出适用于该结构非线性有限元分析的方法。
Adopting linear and nonlinear bearing model, this paper analyses the deformation and stress of bearing with large radius, basing on nonlinear finite element analysis method.
基于非线性有限元分析方法，采用了线性轴承模型和非线性轴承模型分析了大型四点接触球轴承的变形和受力。
Considering the interface slip, a nonlinear finite element analysis model is established by using finite element analysis soft-ANSYS, and gained a reasonable shearing connection coefficient.
利用有限元分析软件ANSYS，对组合梁的交界面相对滑移性能进行了非线性有限元分析，提出剪力连接系数的合理范围。
Optimization results show that this structure optimization method based on nonlinear finite element analysis is effective in joint structure design and the engineering demands are well satisfied.
优化结果显示，采用非线性有限元法和优化方法对卡环连接结构进行设计能够取得满意的效果，设计结果满足工程要求。
General beam-column stiffness connections and the full-welded dog skeleton connection is analyzed and compared by Nonlinear finite element analysis method (ANSYS method) and draw some conclusions.
采用非线性有限元方法(ANSYS程序)分析普通梁柱刚性连接和全焊狗骨式连接并进行比较，可得出一些有益于工程的结论。
In order to study the seismic performance on RC frame with SSC, the nonlinear finite element analysis based on concrete solid element by FEA software ANSYS has been done to simulate the experiment.
针对异形柱框架的抗震性能，对试验模型采用ANSYS建立实体模型并进行了非线性有限元分析。
In this thesis, there are three different span cable Bridges as project background, introduced the theoretical calculation of cable Bridges, numerical methods and nonlinear finite element analysis.
本文以不同跨度的三座索道桥为工程背景，分别介绍了索道桥的理论计算方法、数值计算方法及非线性有限元分析方法。
Based on the geometrical nonlinear finite element (GNFE) theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.
本文根据几何非线性有限元理论，提出张力膜结构初始形态分析的8结点曲面四边形等参单元。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
Using the well-known weighted residual method and finite element procedure, a nonlinear static analysis parallel with effective stress dynamic analysis has been made.
采用著名的加权剩余值法和等参数有限单元法，对坝体进行非线性静力分析和非线性有效应力动力分析。
Biomechanical analysis of artificial hip prosthesis was made by nonlinear finite element method (FEM).
并采用非线性有限元方法，进行人工髋关节的生物力学分析。
A nonlinear finite-element analysis of multiplanar circular tubular KT-joints was carried out in this paper, and the behavior of the tubular KT-joints was described.
对KT型圆钢管空间相贯节点的极限承载力进行了非线性有限元分析，揭示了KT型相贯节点的受力性能。
A nonlinear finite-element analysis of multiplanar circular tubular KT-joints was carried out in this paper, and the behavior of the tubular KT-joints was described.
对KT型圆钢管空间相贯节点的极限承载力进行了非线性有限元分析，揭示了KT型相贯节点的受力性能。
应用推荐