The examples indicate that using regression model instead of process and device modelling is superior in process optimized design and device performance prediction.
实例表明，在工艺优化设计和器件性能预测中用回归模型代替工艺-器件模拟具有较大的优越性。
Process design parameters for the whole flow sheet of rectification system in the methyl isobutyl ketone (MIBK) production facility are obtained through optimized simulation.
通过对甲基异丁基酮生产装置精馏系统的优化模拟，得到了整个流程的工艺设计参数。
The paper briefly introduces plant connecting into system, electric busbar connection design and their optimized process, as well as switch station site selection.
本文简要介绍了电站接入系统和电气主接线设计及其优化过程，以及开关站位置的选择。
This paper focuses on the oxygen buffer the design process, in particular from the welding material and optimized.
着重论述了新型氧气缓冲装置的设计过程，尤其是从选材和焊接上进行了优化。
A four-stage high load LP turbine was optimized and redesigned by applying multistage aerodynamic optimization design process.
采用多级涡轮气动优化设计流程对某四级高负荷低压涡轮进行多级气动优化设计。
Modeling of crank shaft connecting rod slippery piece mechanism and process of optimization design were introduced, and its optimized result was analyzed and compared.
阐述了曲柄连杆滑块机构的建模、优化设计计算的过程，并分析比较了其优化结果。
According to the ore properties of Dongguashan Copper Mine, and combined with the result of test, the structure of technological process is discussed, improved and optimized in design.
本文根据冬瓜山铜矿石的特点，结合选矿试验的结果，对其工艺流程的结构进行了探讨，并在设计中对此流程作了进一步的改进和优化。
Problems of the establishment of basic structure, control of optimization process and analysis and application of optimized result etc. were discussed during the course of topological optimal design.
探讨了拓扑优化设计过程中，基本结构建立、优化过程控制及优化结果分析与应用等问题。
Based on this, the design of casting process was optimized, the solidification process was simulated again, the results of simulation were compared and analyzed.
在此基础上对其铸造工艺进行了修改，工艺优化，又一次进行凝固模拟，对前后模拟结果进行了分析与比较。
This chapter stresses the importance of a defined, efficient and optimized FPGA design process for rapid system development efforts.
这一章强调了定义清晰的、高效的和优化的FPGA设计过程对快速系统开发工作的重要性。
Composites process is optimized by orthogonal regression design method. The result shows that this composites is of good property and fiber binds well with resin matrix surface.
采用正交回归设计的试验方法优化复合材料工艺，所制得的复合材料性能优异，纤维与基体界面粘接良好。
Physical education teaching system design is optimized and a highly creative, dynamic process for sports design.
体育教学设计是对体育教学系统的优化设计，是一个具有高度创造性、动态性的过程。
With 3-dimension dynamic explicit solution procedure, the metal deformation process can be analyzed and simulated accurately and the process design optimized effectively.
利用三维动态显性算法，可以精确地分析和模拟金属变形过程，有效地优化工艺设计。
Moulds of each process is designed in light of the process optimized, and introducing the mould structure of the forming mould and side punch mould for trimming, and the design of key pieces.
根据所确定的工艺方案对各工序模具进行设计，并介绍了成形模和修边侧冲孔模的模具结构以及关键零件的设计。
This work provides the theory and technique foundation for implementing process optimized design and quality control scheme of TA15 alloy connecting piece isothermal forging process.
上述研究为TA15合金连接件的等温锻造工艺的优化设计及质量控制提供了理论和技术上的支持。
In order to improve the quality and efficiency on die casting die design with oblique pin drawing core, the traditional design process was optimized.
为了提高斜销抽芯式压铸模设计的质量和效率，对传统的设计过程进行了优化。
Pickles process craft in quantity of pure breed inoculation, salt, tomato juice and sweet vegetable with orthogonal design was optimized.
通过正交试验对菌种接种量、食盐、番茄汁、甜蜜素的添加量进行了筛选优化。
By the use of the pinch point technique the all LTS heat exchange network is optimized in design, and the new network process obtained does not need external supply of steam.
利用夹点技术对全低变换热网络进行优化设计，得到的新网络流程不需要外供蒸汽。
In the literature review on the basis of this experimental design methods to improve the process-oriented as the core optimized sequential experimental design system.
在文献回顾的基础上，本文以实验设计方法为核心完善面向过程优化的序贯实验设计体系。
The process conditions for hydroxylation of phenol using TS - 1 zeolite as catalyst were optimized by the way of uniform design software.
采用均匀设计试验方法，对TS-1催化的苯酚羟基化反应条件进行了优化。
And the process of polysaccharide extracting of Amauroderma rude was optimized by orthogonal design based on three factors temperature, time and pH.
用正交试验的方法对皱盖假芝深层液体发酵液粗多糖提取工艺条件进行优化，研究了温度、时间、酸碱条件对其的影响。
Therefore, the main process parameters of casting have been optimized using orthogonal design, thus obtaining high-quality castings without chill layer.
本研究通过正交试验对基本工艺参数进行优化组合，得到无白口的优质铸件。
The process conditions were optimized with orthogonal design combined with multi-index test.
通过正交实验结合多指标综合评价法优选最佳制备工艺。
This article describes the optimized process parameter and method for the arc furnace design and operation, as well as the other auxiliary conditions.
为较好地实施该工艺，电弧炉主要工艺参数及辅助条件应与之相适应。
Methods The preparation process of breviscapine injection was optimized by orthogonal design methods; The clarity of breviscapine injection was evaluated by acceptable rate through visual inspection.
方法采用正交实验对灯盏花素注射液的制备工艺进行优选：用灯检率的高低来衡量灯盏花素注射液的澄明度。
MethodsTaking the extraction rate of hesperidin as assessment index, an optimized extraction process was selected with the orthogonal design.
方法以橙皮苷的含量为指标，采用正交实验筛选出枳实中橙皮苷的最佳提取工艺。
MethodsTaking the extraction rate of hesperidin as assessment index, an optimized extraction process was selected with the orthogonal design.
方法以橙皮苷的含量为指标，采用正交实验筛选出枳实中橙皮苷的最佳提取工艺。
应用推荐