For the first output port (output).
对于第一个输出端口(Output)。
For the second output port (Output1).
对于第二个输出端口(Out put1)。
The steps to configure an output port have been described here.
这里描述了配置输出端口的步骤。
Two RF output port, offsetting or allotting output for option.
双口输出，可采用分支或分配输出选件。
A pin is a filter port, and it can be either an input port or an output port.
一个针是一个筛选器端口，它可以是输入端口也可以是输出端口。
And send it to the MIDI Receiver that encapsulates the selected MIDI output port.
并且将其发送给MIDI接收器，该接收器封装了所选的MIDI输出端口。
Data output port can be connected with printer of computer by special interface JK1500.
数据输出端口通过JK1500电子数显量具专用接口可与计算机或打印机联接。
Right-click the output port (Inner) of the JOIN operator, and select Create suitable table from the context menu.
右键单击JOIN操作符的输出端口 (Inner)，然后从上下文菜单中选择Createsuitabletable。
Configurable for standard RS-232 output port, and then send measuring results to micro printers and computers.
可配置标准RS- 232输出端口，将测量结果输出至微型打印机或电脑。
For this example, define an unconditional connection using the blue arrow on the output port of the data flow operator.
对于这个示例，使用数据流操作符输出端的蓝色箭头定义无条件连接。
Top-level my-result output port will receive the results of the step1 result port and place them on the standard output.
顶层my -result输出端口将接收到step1结果端口的结果并将它们放在标准输出上。
Here, you use the first amp to isolate the output port of the SR785 from the dc bias and provide the sinusoidal output.
你可以运用第一个放大器从sr785的输出端从直流电分离出来并提供正弦输出并提供正弦输出。
When no channels are selected, the first channel of each bank, which is normally-closed, is connected to an output port.
当没有通道被选中时，每组开关的第一个通道（常闭）被连接到一个输出端口。
The output port will have been selected via the MidiOut interface and created when the MidiMessageHandler object was constructed.
在构建 MidiMessageHandler对象的时候已经通过 MidiOut接口选择和创建了输出端口。
Can be controlled to change the address, control the corresponding output port, and can learn how to control the Mitsubishi PLC.
可以控制改变地址，控制相应的输出口，同时可以学到怎么控制三菱plc。
Functions including control, serial communication and alarm are enabled with buttons and PLC output port on the instrument panel.
该仪表通过外部按钮或PLC输出接点可实现对仪表的控制、串行通信和报警等功能。
So all we need to do is to create a ShortMessageEvent and send it to the MIDI Receiver that encapsulates the selected MIDI output port.
我们需要做的就是创建ShortMessage Event并且将其发送给MIDI接收器，该接收器封装了所选的MIDI输出端口。
The main coil is wound the main core part, which is used as the output port of the power adapter to output the alternating current.
和主线圈，该主线圈缠绕着主芯部，充当电源适配器的输出端口输出交流电。
Right-click the first output port (Output) of the Regular Expression Lookup operator and select Create suitable table from the context menu.
右键单击RegularExpressionLookup操作器的第一个输出端口 (Output)，从上下文菜单中选择Createsuitabletable。
The first data packets are switched from each of a plurality of network switch input ports to a dedicated output port of the network switch.
将来自各个网络交换机输入端口的第一数据包交换到该网络交换机的专用输出端口。
An output port simplifies how you administer the transport details for a deployed sender bean such as connection factory and one or more destinations.
输出端口将对已部署的发送方bean的传输细节的管理进行简化，例如连接工厂和一个或多个目的地。
The paper concludes that the "transient saturation" phenomenon can happen when optocouplers are used in serial communication port and binary output port.
光耦器件用于串行口、开关量输出等回路时也存在上述现象。
The embedded network controller has integrated input & output port and LCD display & touch panel module, which can realize industrial field measure & control.
嵌入式网络控制器集成了输入输出通道、LCD显示和触摸屏模块，能够实现工业现场测控；
The virtual paths at the dedicated input port are switched to outport port destinations of the network switch identified by the common output port destinations.
专用输入端口的虚路径被交换到公共输出端口目的地所识别的网络交换机的输出端口目的地。
Finally, create a suitable target table by selecting "create suitable table..." from the right-click context menu of the output port of the "Find Deviations" operator.
最后，从“FindDeviations”操作符输出端的右键菜单中选择“CreateSuitabletable…”，创建适当的目标表。
Wavelength switching together with the switching of the dominating output port of the fiber laser is achieved by controlling the power of a tunable injection laser.
通过控制一个可调谐注入激光器的光功率实现了该激光器的波长切换和主输出端口切换。
The electromagnetic pulse(EMP) damage mechanism and failure modes are obtained for the input port and output port of solid state relays by current injection method.
本文通过电流注入法对某型直流固态继电器输入端与输出端的电磁脉冲损伤机制进行了实验研究，确定了两种失效模式。
General expressions of intensity ratio of light in ring and output port were deduced according to multiple-beam interference, and optimum resonance condition was given.
从多光束干涉的基本原理出发，推导了集成光波导陀螺谐振腔一般谐振过程中，谐振环光强和输出光强表达式。
Further studies indicate that the output optical power in each output port of the device can be tuned by reducing the radii of the silicon rods in the photonic crystals.
进一步研究表明，通过改变器件内部介质柱的半径，可以改变光在输出端的输出功率。
In the core router for optical burst switching network, multi-classes traffic wilt use differential probability to choose output port for transmission due to the choosing of different routing.
在光突发交换网络的核心路由器中，多等级业务会由于选择路由的不同而采用不同的概率选择输出端口进行输出。
应用推荐