The machine is designed for automatic loading and unloading of paper cores from the rewinding shaft.
适用于胶带成品之自动卸取及纸管快速自动安装。
Equipped with electrical eyes to monitor the machine and stop it in case it runs out of paper cores or any other unforeseen problems.
配备光电开关，随时检测机器运行情况，如若出现原纸运行完毕，无纸芯或者其它意外情况，可自动停机。
This paper mainly focuses on the rehabilitation of the RC frame joints with the Carbon Fiber Sheets (CFS) which had no stirrup in the joint cores.
本文主要研究用碳纤维布(CFS)及小钢架加固核心区没有配置箍筋的混凝土框架节点的加固方法和加固效果。
This paper presents a new method of steady flow to solve the problem that the injection rate into cores is difficult to get steady, especially for gas in measuring relative permeability.
本文就用稳定法测量相对渗透率曲线中，存在的注入流量难以稳定的问题，提出了一种新的稳流方法。
In this paper, a theory and instrument for measuring three-phase saturations of oil, gas and water system in cores by microwave attenuation technique were discussed.
本文论述了微波衰减法测定圆柱状岩芯油、气、水三相饱和度的理论及其仪器构成。
The paper discusses high power pulse transformer iron-cores structure data and its material selection principle, it is a necessary theoretical study for optimizing design of transformer.
文章探讨了高功率脉冲变压器铁心的结构参数及其材料选择原则，是优化变压器设计的必要的理论研究。
This paper reports the result of direct observation of shooting process with high speed camera and the density distribution of the cores.
本文利用高速摄影直接观察的方法对射砂过程进行了研究，同时还对砂芯内的密度分布进行了测试。
In this paper, the principle of core vibration was described, and a method extracting cores vibration signal without operating transformer at no load condition was introduced.
本文介绍了变压器铁心振动的起因，提出了一种不必空载运行变压器即可取得变压器铁心振动信号基频成分的方法。
The paper analyzes the design optimization of core box using coated sand in Z8040 hot box core shoot machine to make the cylinder block cores and sprue cores.
分析Z8040射芯机用覆膜砂热芯盒法制作气缸体前后端面芯及其浇口砂芯优化设计方案。
In this paper the author narrates the first application of monolithic TA8690AN double -format integrated circuit in the cores of the color television sets exported to South America.
本文叙述单片TA8690AN双制式解码集成电路首次在出口南美彩电机芯上的运用情况。
This paper introduces the methods of the air venting of sealed cores and the place merit of core supports. This process puts forward a new concept in casting production.
本文介绍了这种铸件在生产过程中，不出砂坭芯的排气和摆放芯撑的方法。
This paper expounds the making technology and technical properties of a new compound block which USES the hollow concrete block as the shell and is filled with foam concrete in its cores.
本文论述了一种以混凝土空心砌块为外壳，孔洞内充填泡沫混凝土的复合砌块的制作方法及其技术性能。
Based on the results of dispersion experiments on cores of sand and shale, the paper analyzed the variability of acoustic dispersion for dry and water-saturated cores.
结合岩心砂泥岩频散特性实验结果分析了岩心在饱水及干燥状态下声频散的特点。
In this paper, a method extracting cores vibration signal with operating transformer at on-load condition was introduced.
文中提出了一种不空载运行变压器取得变压器铁心振动信号基频成分的负载电流法。
This paper presents a two-fluid model applied in thermal hydraulic transient analysis of nuclear reactor cores.
本文给出了用于核反应堆堆芯热工水力瞬态分析的两流体模型。
The paper developed low-melting-Point alloy cores, through die casting experiment, the cores hole deformed well.
自行研制的低熔点合金型芯，经压铸实验，铸件孔成形完好。
In this paper, the temperature field of Sodium silicate sand cores of the machine tool's cast iron is measured.
本文对机床铸铁件水玻璃砂芯在浇注、冷却过程中的温度场进行了测定。
This paper presents a high performance 7-axis controller developed, with the cores of ARM and FPGA.
讨论了一种采用ARM处理器及FPGA设计的7轴电动机伺服运动控制器。
In this paper, a complex scalar magnetic potential finite element method is proposed to calculate the three dimensional anisotropic nonlinear magnetic field and iron loss in transformer cores.
本文提出复标量磁位的有限元法计算变压器铁心中三维各向异性非线性磁场和损耗。
In this paper, the application of low stress dynamic detecting and drillings to get continuous cores in the testing of deeply stirring cement piles is discussed.
主要探讨低应变动力检测法、钻孔连续取芯法在深层搅拌水泥桩检测中的应用。
Technical method of integral stamping twist vane cores with unequal sections and the technological difficulties and technical measures to he taken are presented in the paper.
阐述了扭转不等截面复杂叶片整体冲压成形的工艺方案、工艺难点及所采取的技术措施。
The faces are symmetrical and the height of cores is constant. In this paper, critical loads are evaluated using energy method. Some calculative figures are given.
面板采用对称铺层、等高度蜂窝夹芯，利用能量法对临界载荷进行了计算并给出了一些计算曲线。
This paper presents a novel test scheduling solution, unlike previous techniques that take advantage of balanced scan chains of every single core, utilizing the balance of pairwise combined cores.
不同于以往基于单个芯核扫描链平衡的调度技术，本文提出的对平衡调度技术是利用两个芯核配对后扫描链可能比单个芯核扫描链更平衡，获得比单平衡更短的测试时间。
This paper the cause of the scab of the inside surface of cylinder block on condition that the resin sand cores are made in cold core box.
本文分析了冷芯盒村脂砂芯条件下缸体铸件内腔结疤的原因。
This paper presents a hardware design scheme of torque control for the large inertia retroaction flywheel based on a fully digitized system level integration of IP cores.
针对大惯量反作用飞轮系统中的关键技术进行了研究，提出了一套基于数字IP内核集成的硬件实现方案，可以解决飞轮控制中普遍存在的一些问题。
The cores of the two algorithms presented in this paper are to classify the samples with SVM method.
该文提出的两种算法其核心均是利用支持向量机方法对样本进行分类。
The cores of the two algorithms presented in this paper are to classify the samples with SVM method.
该文提出的两种算法其核心均是利用支持向量机方法对样本进行分类。
应用推荐