Based on the "XMLAttributeDefinition" in the model file in Figure 5, parametric search on the values of element "price" is possible.
根据图5的模型文件中的“XMLAttributeDefinition”，可以对“price”元素的值进行参数化搜索。
Parametric methods are very useful for subjecting uncertain situations to the rigors of a pre-defined and proven mathematical model.
参数化的方法对于将不确定的情况置于一个预定义的和被证明是精确的模型之下十分有用。
Parametric design is a modeling method. It uses important geometric parameters to construct and modify geometric model.
参数化设计是一种使用重要几何参数快速构造和修改几何模型的造型方法。
A series of non parametric tests validated the digitized distortion model and indicated that the Paired Comparison Method was superior to the Standard Comparison Method.
结果一系列非参数检验证实数字变形模型的有效性，且配对比较法优于普通的标准比较法。
A hypersonic cruise vehicle MDO model based on parametric method is established.
建立了基于参数方法的高超声速巡航飞行器MDO模型。
In this paper, empirical Euclidean likelihood ratio statistics are constructed for parametric in a nonlinear model. And prove strong consistency and asymptotic normality of the estimation.
本文构造了非线性模型中参数的经验欧氏似然比统计量，并证明了该似然估计的强相合性和渐近正态性。
The problem of the parametric estimation on a convolutional model is discussed.
讨论褶积模型参数估计问题。
Based on EM approach of right dock, it gives out parametric estimation of accelerated life testing in linear model.
基于右截尾的EM算法，给出了恒加试验线性模型的参数估计，并结合加速方程得到了产品的寿命估计。
This paper investigates the design and implementation of project image progress parametric generating system based on B/S model for railway engineering(PIPGS).
研究并实现了基于B/S模式的铁路工程形象进度图参数化生成系统（PIPGS）。
A parametric probabilistic model is sought for the SBM spectral densities, and a Bayesian framework is used to statistically update it to local records.
一个参数概率模型用于得到SBM谱密度，一个贝叶斯框架用于统计更新到本地记录。
A variable length simple pendulum model is introduced, elementary analysis and perturbation analytic solution of nonlinear differential equation for parametric resonance are presented.
采用可变长度单摆的力学模型对秋千振荡给出初等分析，采用微扰近似法导出了秋千的非线性参数共振解析解， 并进行了讨论。
Based on the resulting input and output data, the parametric model and nonparametric model of system can be obtained.
基于输入输出数据，获得系统的参数模型或非参数模型。
In general, active contour Models include parametric active contour model and geometric active model.
常用的活动轮廓模型主要包括参数活动轮廓模型和几何活动轮廓模型。
Geometric active contour model has many advantages over parametric active contour model, such as computational simplicity and the ability to change curve topology during deformation, et al.
相对于参数活动轮廓模型，几何活动轮廓模型具有很多的优点，如计算的简单性和在变形的过程中能够处理曲线的拓扑变化，等等。
The internal model of the model generated in the method is a parametric model itself. So the memory needed is smaller, and the modelling efficiency is higher for the method.
其所建模型的内部模型本身就是参数模型，因此建模所需的内存较小，建模效率较高。
Based on the approximation property of fuzzy systems, a nonlinear system can be expressed as the form of linear parametric model and a modelling error term.
根据模糊系统的逼近性质，非线性系统可以表示为线性参数化模型加上一建模误差项。
Firstly, the parametric assembly model of prototype shelter was built. Then, both the driving parameters and the assembly relationship expressions of all parts were defined.
首先建立了原型方舱零件及其装配的参数化模型，然后定义了驱动参数及其所有零件的装配关系表达式。
A voice conversion approach with a sinusoidal plus noise model is introduced and a parametric conversion algorithm based on phoneme segments is discussed in this paper.
提出一种基于正弦加噪声模型的说话人转换方法，着重讨论通过修改音素段内的声学参数实现说话人的转换。
Based on parametric modeling module, geometric model of LA4V type axial piston pump was built.
基于参数化建模模块，构建了LA4V型轴向柱塞泵的几何模型。
With bispectrum analysis, an ar model parametric bispectrum estimation is presented for radar target echoes.
本文利用双谱分析方法，提出用非高斯ar模型对雷达目标回波信号进行参数化双谱估计。
Based on the application study of ANSYS in the optimization design of RC structure t beam, the building method of 3d parametric entity model to RC structure t beam is given.
通过对ANSYS在钢筋混凝土T形梁优化设计中的应用研究，给出了建立钢筋混凝土结构T形梁参数化三维实体模型的方法。
Researched software development techniques based on UG, and established mould board parametric model and parametric drive mechanism.
进行了UG二次开发技术研究；建立了模板参数化模型、模板参数驱动机制；
Taking the spur gear as study object, this article introduces the method of establishing the parametric model in CATIA and transmitting it into ANSYS by graphic data transformation interface.
以直齿圆柱齿轮为研究对象，重点介绍了如何利用CATIA对其进行参数化建模及通过图形数据转换接口导入到ANSYS中建立有限元模型。
The input parametric surfaces are discrete, then we will get new surfaces with bicubic parameter spline function and build uniform workpiece model.
对于参数曲面，采用先离散，再重新拟合的处理方法，建立统一的双三次参数样条曲面通用工件模型。
Considering the boom cross section as a whole, a parametric finite element model and a parametric optimization model for local stability calculation of a boom structure were established.
将吊臂截面作为整体考虑，建立了吊臂结构局部稳定性计算的参数化有限元模型和参数优化模型。
There are two types of deformable models: parametric deformable model and geometric deformable model.
变形模型分为参数变形模型和几何变形模型两种。
To the different problems in practice, three main aspects are involved in this paper: the estimation of motion vector field, the parametric tracking model of lv and probability tracking model of lv.
针对实际应用的不同侧重点，本文核心内容包括三方面：LV的运动矢量场估计、LV参数化运动跟踪模型和LV的概率跟踪模型。
To the different problems in practice, three main aspects are involved in this paper: the estimation of motion vector field, the parametric tracking model of lv and probability tracking model of lv.
针对实际应用的不同侧重点，本文核心内容包括三方面：LV的运动矢量场估计、LV参数化运动跟踪模型和LV的概率跟踪模型。
应用推荐