Enrich the plastic limit analysis of cylindrical shell under axisymmetric loads.
丰富了圆柱壳在轴对称荷载作用下的塑性极限分析。
The plastic limit analysis was applied to calculate the stability of jointed rock slopes.
运用有限元塑性极限分析方法研究节理岩质边坡的稳定性。
A study for determining plastic limit moment of nozzles in cylindrical vessels is presented.
对圆柱形容器在接管外载荷作用下的塑性极限载荷进行了研究。
The aim is to calculate the plastic limit loads of structures made of orthotropic materials.
利用数值方法研究了正交各向异性材料结构的塑性极限分析问题。
A study for determining plastic limit moment of nozzles in cylindrical vessels was presented.
对圆柱形容器在接管外载荷作用下的塑性极限载荷进行了研究。
At last, a formula presenting the relation of liquid plastic limit of organic soil is derived.
最后，给出有机质土的液塑限关系推导公式。
In this paper, the method of weighted residual is applied to the structural plastic limit analysis.
本文将加权残数法应用于结构的塑性极限分析。
The plastic limit is an important property of fine-grained soils, it reflects the interaction between soil and water.
塑限是细粒土的一个重要特征，它反映了土粒和水相互作用时的性态。
Based on the traditional plastic limit analysis, an improved rigid-nonlinear Hardening approximate model is established.
应用传统的极限分析理论，提出一种改进的刚性-非线性强化近似模型。
In this paper, the plastic limit method is used to investigate the strength of reinforced concrete slabs in punching shear.
本文用塑性极限方法对钢筋砼板的冲切承载力进行了研究。
The plastic limit loads of simply supported circular plates under various loads can be obtained based on the present solution.
用本文的解还可以推出多种荷载作用下简支圆板的塑性极限荷载。
Some can get holomorphy solutions. In the course of plastic limit analysis, maybe there are the phenomena of producing yield-line.
在规则边界的薄板的塑性极限分析过程中，通常会有产生塑性铰线这一现象。
By introducing the generalized method of cells (GMC) into plastic limit analysis, the bearing capacity of ductile composites is studied.
本文将细观力学中的单胞(GMC)模型运用到塑性力学的静力极限分析中，研究韧性复合材料的塑性极限承载能力。
This means that the "plastic limit" may not be the best green ideas, how to dispose of plastic bags after use is a problem to be solved.
这意味着，“限塑”未必是最佳的绿色主张，如何处置使用后的塑胶袋是一个要解决的问题。
The parametric variational principle may be used to finite element analysis as in plastic limit analysis and in elastic contact problems.
如同弹性接触问题及极限分析中那样，该原理可望用于有限元数值分析中。
The plastic limit analysis and parametric design of a hollow cast steel roll with axle sleeve of the high-speed paper machine are studied.
研究了高速纸机中具有闷头的空心铸钢辊结构的塑性极限和参数设计问题。
Under just one loads of internal pressure, this article calculates plastic limit load and studies the law of changes with influential factors.
在内压荷载作用下计算了含半椭圆裂纹厚壁弯管的塑性极限荷载并研究了其随影响参数的变化规律。
The correlation model of liquid-plastic limit has been built by regression analysis of experimental data of clayey soil in the east of Mudanjiang.
该文通过对牡丹江以东六个地区粘性地基土液、塑限试验数据的回归分析，建立了各地区的液、塑限相关模型。
It is proved that the optimality conditions are also sufficient if the objective function is a convex function of the plastic limit bending moment.
当目标函数是塑性极限弯矩凸函数时，证明了这一最优性条件也是最优解的充分条件。
The yield criterion of composite materials is simulated by using the homogenization method of micromechanics and the plastic limit analysis theory.
运用细观力学中的均匀化方法和塑性力学中的极限分析理论，分析了复合材料的屈服准则。
In the plastic limit analysis, the wrinkler's plate is smartly analyzed in yield-line theory to get the critical compression strength of the coal pillar.
在分析过程中，利用机动法对温克尔地基板（弹簧支撑板）进行了塑性极限分析，得出了煤柱抗压强度的临界值。
Advances an improving rigid nonlinearity hardening approximate model of the constitutive relations using the traditional theory of plastic limit analysis.
应用传统的极限分析理论，对可简化为刚塑性的材料本构关系提出了一种改进的“刚性-非线性强化”近似模型。
At the plastic limit or breakpoint of violent disturbance, breakdown of the vegetation system takes place completely and thus artificial reafforestation is needed.
剧烈干扰的应力在塑性极限或断裂点以上，系统完全崩溃，需要通过人力重新建造。
The plastic limit analysis made in this paper shows that one-way shear failure cannot be the most critical among possible shear-type failures of pile-caps at corners.
本文用塑性极限方法证明，在角桩上可能发生的剪切型破坏中，单向剪切不起控制作用。
Test results indicated that the liquid limit of artificial organic soil increased exponentially, whose plastic limit increased of linearly with the humic acid content;
试验结果表明，人工有机质土的液限以指数形式增长，塑限则呈线性形式增加；
Appraising the current methods of slope stability, the paper puts forward Finite Element Plastic Limit Analysis of the slope stability subjected to pore water pressure.
本论文对目前用于边坡稳定性评价的主要方法进行了研究对比后，提出了考虑孔隙水压力条件下的边坡有限元塑性极限分析法。
Since normal plastic theory is too complex, the membrane theory and the semi-membrane theory are adopted to establish the equilibrlm equations in plastic limit analysis.
鉴于有矩理论的复杂性，本文在作极限分析时，采用了无矩理论和半无矩理论的平衡方程分别作为中短壳和长壳的平衡方程。
In this paper the reason and criterion of the application of the model to plastic limit analysis are discussed, and an algorithm of computing plastic limit load is given.
文中讨论了该模型适用于全塑性分析的机理和判据，还设计了一个确定塑性极限载荷的算法。
On the basis of appraising the existing analytical methods of slope stability, the plastic limit analysis using finite elements is put forward to analyze the slope stability.
在评价现有边坡稳定分析方法的基础上，提出了边坡稳定的有限元塑性极限分析方法。
The analysis and contrast of deformation pattern, state of stress, plastic deformation history, plastic limit load and limit load of elastic buckling are analyzed and contrasted.
最后对三种结构型式的拱顶储罐的变形方式、应力状态、塑性变形历史、塑性极限压力、弹性失稳临界压力进行了分析与对比。
应用推荐