A visual inspection must be done carefully for the materials, especially for those to be used in fabrication of pressure vessels.
必须对材料仔细进行外观检查,对制造压力容器所用材料尤需如此。
Butterfly spring valves are important safety attachments of boiler pressure vessels, they are used to prevent system pressure from exceeding allowable limit value.
蝶形弹簧安全阀是锅炉压力容器的重要安全附件,用于防止系统压力超过允许的极限值。
The article describes the assembly of positioning keys on reactor pressure vessels and put forth an assembly procedure of good workability, simple operation and high reliability.
论述反应堆压力容器定位键安装过程,提供了一种工艺性好、操作简单、可靠性高的安装方案。
Because of the composite pressure vessels' advantages such as light weight, high strength, safety and reliability, they have been widely used in aerospace, military and industrial fields.
该复合压力容器以其质量轻、强度高和安全可靠等优点已经广泛应用于航空航天、军事及工业领域。
Cylinder is a common element in constructing pressure vessels and pipes.
圆筒是构成压力容器和管道的最基本元件。
SCC is one of the main forms of corrosion accidents of pressure vessels and pipes.
应力腐蚀开裂(SCC)是压力容器及管道腐蚀失效的主要形式之一。
Saddles, lugs or legs for pressure vessels shall be as per the tables in Vessel Standard.
压力容器的承台、吊耳或支腿应符合容器标准中的表格的要求。
This software applies to manage welding procedure qualification for steel pressure vessels.
该软件适用于钢制压力容器焊接工艺评定的各项管理工作。
Also, the formulas of allowable internal pressure for various pressure vessels are proposed.
并在此基础上推导了不同压力容器的许可压力公式。
Products used in cars, motorcycles, pressure vessels and fire equipment and other industries.
产品用于汽车、摩托车、压力容器和消防器材等行业。
Composite plate and shell with rubber liners can analogize real filament wound pressure vessels.
配橡胶内衬的复合材料板壳可以模拟真实纤维缠绕压力容器。
The paper briefly introduces the carbon and low-alloy steel forgings standard for pressure vessels.
本文简要介绍了压力容器用碳素钢和低合金钢锻件标准。
It is important for the design of pressure vessels to study stress intensity of this type of structure.
研究这种结构的应力强度对于压力容器的设计具有重要意义。
Composite plate and shell with rubber liner can simulate filament wound pressure vessels of the aircraft.
配橡胶内衬的复合材料板壳可以模拟宇航飞行器的纤维缠绕压力容器。
So the compound or wire-wounded pressure vessels are often adopted to assure the fail safe of thick-wall vessels.
因此常采用复合式或绕丝式的容器,使厚壁容器具有安全失效的性能。
Boilers, pressure vessels in line with national and industry standards, and comply with environmental requirements.
锅炉、压力容器符合国家和行业有关标准,并符合环保要求。
The tanks and other pressure vessels we design and fabricate cover the full spectrum of applications, sizes, types, and metals.
我们公司生产制造适用于所有的应用范围的、各种型号、各个类型和各种金属材质的储罐及其它压力容器。
Mean stress effects on fatigue life of pressure vessels is analyzed in detail and relevant fatigue design method is also given.
分析了平均应力对容器疲劳寿命的影响,并给出了相应的疲劳设计方法。
The reliability of pressure vessels is studied with different strength theories in this paper. Some useful conclusions are obtained.
在不同强度理论条件下,对压力容器的可靠度进行了研究,得出了一些有益的结论。
The product is suitable for level measurement of vaporizable liquid in pressure vessels especially liquefied gas in underground tank.
该产品适用于压力容器中易汽化介质的液体测量,尤其适合埋地罐液化气介质的液位测量。
In design of composite pressure vessels, the fiber orientations and quantities of fiber in different orientations are the key problems.
在纤维缠绕压力容器设计中,纤维缠绕的方向及各方向纤维用量配比是关键问题。
The shell parts of reactor pressure vessels have been often fabricated with formed plates welded together, especially in USA and Japan.
反应压力容器的壳体,历来常常是用成型钢板焊接而成的,在美国和日本尤其如此。
A was amongst the first to obtain the design and manufacturing licenses for three-category pressure vessels from the Government in 1984.
公司于1984年首批取得三类压力容器设计和制造许可证,在非标压力容器设计和制造方面有雄厚的技术实力和装备优势。
It also includes application steels for Bridges, pipes, pressure vessels, automotive manufacturing, shipbuilding and welding steel grades.
它还包括应用于桥梁、管道、压力容器、汽车制造、造船以及焊接钢种等钢材。
In addition to cracks resulting from welding in boiler and pressure vessels, there are also corrosion cracks due to corrosive environment.
锅炉及压力容器除了焊接引起的裂纹外,还存在着由腐蚀性环境而引起的腐蚀开裂。
This paper describes acoustic emission property of ductile stainless steel materials and detecting for small stainless steel pressure vessels.
本文介绍了韧性不锈钢材料的声发射特性,以及对小型不锈钢压力容器进行声发射检测的结果。
Purchaser will provide D-123 "vessel Standard" which supplements the above drawings and determines the detail construction of pressure vessels.
买方将提供D- 123“容器标准”作为上述图纸的补充,并决定压力容器的具体施工。
In view of troublesome characteristic of annual checkup process, this paper brought forward a work flow for annual checkup of pressure vessels.
根据年度检查过程繁琐的特点,文中提出了压力容器年度检查工作流程。
In view of troublesome characteristic of annual checkup process, this paper brought forward a work flow for annual checkup of pressure vessels.
根据年度检查过程繁琐的特点,文中提出了压力容器年度检查工作流程。
应用推荐