The influence of processing conditions on chemical, physical and sensory characteristics of aqueous extracts of peanuts (peanut milk) was investigated.
研究了不同提取工艺对花生乳物理、化学及感官特性的影响。
The optimum formulation and processing conditions were determined.
确定了最佳配方和工艺条件。
The influence of processing conditions on the property of phenolic foam was studied.
研究了酚醛泡沫制备工艺中一些参数条件对泡沫体性能的影响。
Perfect crosslinking network could be obtained at proper ingredients and processing conditions.
选择合适的原料配比和交联工艺，可以获得相对完善的网络交联结构。
All functions can be controlled individually to create many combinations of processing conditions.
所有的功能都可以单独控制以实现多种处理条件的组合。
The processing conditions for preparation of Maize microporous starch by different enzymes were studied.
对酶法水解玉米淀粉制备微孔淀粉的工艺条件进行研究。
If the processing conditions of MAPP were different, the peaks of decomposition temperature were changed.
APP微胶囊化处理条件不同，分解反应的峰温变化亦不同。
Review the design graphics, processing conditions, content changes and development matters with suppliers.
与厂商检讨设计图面、加工条件、改变内容等有关产品开发事宜。
The paper mainly studied the processing conditions of bamboo by hydrogen peroxide alkaline pulping in lab.
对竹片碱性过氧化氢法制浆工艺条件进行了探讨。
In this article, the processing conditions of surface modification of Hubei Daye wollastonite are studied.
实验以湖北大冶硅灰石为原料，初步探讨了硅灰石表面改性的工艺条件。
When using for more stringent processing conditions, please test in advance, use after verifying repeatedly.
当加工条件比较严格时，请事先进行试验，经过反复验证后再加以使用。
The results showed that the specimen possessed very different properties under different processing conditions.
实验结果表明：在不同的工艺条件下试样的性能有很大的差别。
The sheath scale varies to a different degree with respect to parameter change for different processing conditions.
但对于不同的参数区间，鞘层特性对参数的变化表现出不同的敏感性。
For rotational molded truck fender, raw material, processing conditions and the design of part and mold were studied.
对卡车翼子板滚塑成型原料、工艺条件、制件和模具设计进行了研究。
In injection molding, the residual stress and shrinkage of the product are affected by processing conditions directly.
注塑成型工艺参数对制品的最终残余应力和收缩有着直接的影响。
And gasoline refining was carried by using this catalyst, and the optimum processing conditions were also investigated.
利用自制的催化剂对催化裂解稳定汽油全馏分进行了精制，并研究了其最佳工艺条件。
This paper is mainly concerned about the materials, processing conditions and the application of the edible starch film.
本试验对可食性淀粉膜的制备材料选择、工艺条件及膜的应用进行了研究。
The main ways of bubble prevention are material insurance, dry intensification, strict control of processing conditions.
其主要措施有：把好原料关、加强干燥、严格控制生产工艺条件。
The processing conditions of preparing bio-ethylene with molecular sieve catalyst from ethanol as material were studied.
以分子筛类催化剂对低浓度乙醇脱水制生物乙烯进行了研究。
The L/D ratio of metal fiber is greatly affected by processing conditions. The different L/D ratio of metal fiber has a…
成型加工条件对铜纤维的长径比和分布有显著的影响，不同长径比的铜纤维对复合材料的性能影响也不同。
The processing conditions, formulation and production influencing factors of jelly type coconut yoghurt were probed into.
探讨了凝固型椰子酸奶的工艺条件、配方及生产影响因素。
The raw material and the optimum processing conditions which were suitable for production of HDPE filaments were discussed.
对适合生产聚乙烯单丝的原料和单丝的最佳生产工艺条件进行了探讨。
The optimal processing conditions of cultivating lipid yeast by using waste water from soybean product processing was studied.
研究了利用豆制品生产废水培养油脂酵母的适宜工艺条件。
The influences of some factors on the yuba quality were studied and the processing conditions were optimized by uniform design.
利用均匀实验设计方法，探讨了腐竹生产过程中多种因素对腐竹品质的影响并优化了生产工艺条件。
The influence of MWNTs content and processing conditions on the conductivity and mechanical properties of composites was studied.
考查了纳米碳管含量及制备工艺对材料电性能和力学性能的影响。
The processing conditions of forming composites such as time, pressure and temperature influence the matrix's impregnating degree.
复合材料的成型条件如成型时间、成型压力、成型温度等影响基体的浸渍程度。
The optimal processing conditions of soybean protein isolation and remarkable problems occurred in production were also presented.
介绍了大豆分离蛋白的最佳生产工艺条件和生产过程中应注意的问题。
The synthesis and processing conditions of the bifunctional catalyst for dimethyl ether were studied by using fixed bed reactor in the paper.
本论文采用固定床反应器，对合成二甲醚双功能催化剂及其工艺条件进行了研究。
The factors that affect alloy's properties: types of ABS and PC, the ratio of components, compatibilizers and processing conditions are discussed.
介绍了影响合金力学性能的主要因素：原料、组分的配比、相容剂、成型条件等。
By analysing the processing conditions and influences of amounts of each masterbatch on film properties, the formulation and process are determined.
通过考察加工条件及各功能母料的用量对薄膜性能的影响，确定了原料配方及薄膜制备工艺。
应用推荐