Low energy consumption, high output and big reduction ratio;
能量消耗小、产量高、破碎比大。
The reduction ratio declined slowly and was relatively stable.
缩减比例逐年小幅降低，相对稳定。
The maximum NOx reduction ratio of CWS obtained in this study was 64%.
试验获得的最高水煤浆脱硝率为64%。
High molecular weight. Low reduction ratio. Excellent thermal stability. .
高分子量。低减速比。优良的热稳定性。
The experiment results, show that the range of reduction ratio is very practicable.
理论计算结果与实验结果对比表明，所得减薄率选取范围具有较强的实用性。
The influence of magnitude of the reduction ratio on the products quality was studied.
并对钼方坯旋锻归圆前道次压缩比的大小对钼产品质量的影响进行了研究。
In this paper, the method measuring joint reduction ratio of V01 arc welding robot is presented.
提出了V01弧焊机器人关节减速比的测量方法。
With the increase of reduction ratio, the volume fraction of dynamic recrystallization increases.
随着压下率的增加，动态再结晶体积分数升高；
REDUCTION RATIO BY VOLUME: Use clean water, 10 parts of paint to 1parts of water. Stir well before use.
稀释份量：根据施工需要，可酌情用0-10％的自来水稀释，充分搅匀后使用。
The rational gap length reduced the volume of adhesive effectively and the highest reduction ratio was 60%.
合理的间隙长度可以有效地减少胶粘剂的用量，减少率最大可达60%；
The stress reduction ratio and the vertical stress distribution in the embankment fill were studied in detail.
根据试验结果，分析了应力折减系数大小和填土中的竖向应力分布特点。
Especially it is suitable for being used in all kinds of equipments required high power and big reduction ratio.
因此，这种传动装置特别适合应用于各种需要大减速比和传递大功率的装备之中。
General-purpose resin. Medium reduction ratio. Excellent color and clarity. Accepts filler exceptionally well. .
通用树脂。中等缩小比例。出色的色彩和清晰度。接受填料出色。
The speed is based on the synchronous motor speed reduction ratio as a benchmark calculated by dividing the value of.
转速是以电动机的同步转速为基准除以减速比而算出的数值。
When the cumulative reduction ratio reaches 30%, about 67% of the inner region of the axial forging is modified fully.
当压下率达到约30%时，随材料心部有67%的区域充分改性；
These factors include ratio of upper and lower roll diameter , reduction ratio , enterance angle and roll rotation speed.
因素有上下轧辊直径比、压下率、导入角和轧辊转速。
The attribute reduction quality, which includes reduction ratio and approximate quality, is defined to scale the reduction effectiveness.
提出约简质量的定义，从属性约简率和近似质量两方面来衡量约简效果。
Tolerance of wheat varieties to insect injury was determined with ratio of aphid numbers and reduction ratio of wheat weight per 1000 grains.
用蚜量比值和千粒重降低比值法测定了小麦品种的耐害性。
The primary drive gear(crankshaft gear)and the primary driven gear are the source of noise due to their high speed and bigger reduction ratio.
作为摩托车初级传动的曲轴齿轮及初级从动齿轮，由于转速高及降速比大，是产生噪声的主要因素。
Through the comparison of numerical simulation value and experiment results, the range of reduction ratio was obtained while the tube forming ideality.
通过数值模拟与实验结果的比较，得出了获得较理想的成形薄壁筒形件时减薄率的选取范围。
The influences of strip thickness, forward and backward tension, reduction ratio and resistance to deformation on the edge drop were investigated in detail.
详细研究了带钢厚度、张力、压下率、变形抗力等对边缘降的影响。
Steelmaking Plant of WlSCO, the main technological parameters were analyzed and optimized, such as reduction position, reduction amount, and reduction ratio.
结合武钢二炼钢动态轻压下技术的应用情况，对压下位置、压下量、压下率等主要参数进行了分析及优化。
After the model is decided, choose power, reduction ratio and assembling type in accordance with the conveying capacity, conveying distance and layout (see Table 5-12).
选定机型后，可根据输送量，输送长度和工艺布置状况(参照表5 - 12)选择动力和减速机速比及装配型式。
Planetary reducer motor with small size, light weight, wide range of reduction ratio, high transmission power, smooth running, compact structure, high bearing capacity.
行星减速电机具有体积小、重量轻、减速比范围广、传动功率高、运转平稳、结构紧凑、承载能力高等优点。
Experiments show that this approach can achieve high energy reduction ratio by exploiting the dynamic slack time sufficiently and controlling the scaling overheads effectively.
实验结果表明，该方法能够充分利用动态松弛时间，有效控制调整开销，实现较高的能耗优化率。
The method used to determine volume-reduction ratio for scroll compressor with modified profile is proposed. Formula for compression pockets and volume-reduction ration are given.
提出了一种修正型线涡旋压缩机内容积比的确定方法，给出了压缩腔容积和内容积比计算公式。
The effects of coiling temperature and cold rolling reduction ratio on deep-drawing properties of low-carbon sheets hot-rolled by FTSR of Tangsteel were investigated in laboratory.
采用唐山钢铁股份有限公司FTSR连铸连轧生产线生产的热轧卷作为生产冷轧低碳钢板的原料，研究了不同卷取温度和冷轧压下率对冷轧薄板深冲性能的影响。
The effects of coiling temperature and cold rolling reduction ratio on deep-drawing properties of low-carbon sheets hot-rolled by FTSR of Tangsteel were investigated in laboratory.
以低碳钢为实验原料，采用不同卷取温度和冷轧压下率进行工业实验，研究了卷取温度和冷轧压下率对深冲板组织和性能的影响。
Results indicate the local high point height and additional tension stress of rolled strip are proportional to local high point initial height of strip, decrease as rolling reduction ratio increases.
研究结果表明：轧后带钢局部高点高度及附加张应力的大小与来料高点高度成正比，随总轧制压下率的增大而减小。
Even with historic inventory reduction rates, the inventory-to-sales ratio skyrocketed from a low last June of 1.25 to 1.46 by December. That is the swiftest rise in that benchmark since 1982.
虽然存货减少比例创下历史高度，库存-销售量比率仍旧飞涨，从1.25的低点达到了十二月的1.46 .这是自1982年来这方面的标杆的最快速增长。
应用推荐