This article has studied fuzzy reliability and optimization design. Applying fuzzy mathematics and fuzzy technology to mechanic design area.
本文对模糊可靠性和优化设计问题进行了研究，将模糊数学和模糊技术运用于机械设计领域。
On the basis of reliability and optimization design theory, this paper discussed the general method for reliability and optimization design of pressure vessel.
在可靠性优化设计理论的基础上，探讨压力容器可靠性优化设计的一般方法。
Reliability analysis of lifeline systems under seismic action is the basic problem in the lifeline systems' layout, design, rebuilding and optimization.
生命线工程网络抗震可靠性分析是进行生命线工程系统规划、设计、改造与优化的基础。
Based on finite element theory and optimization theory, considering mechanical properties of the structure, the reliability optimization design method of tower truss system is presented.
根据有限元理论及最优化理论，同时考虑结构受力特点，给出了塔架体系在可靠度约束下的最优化设计方法。
A numerical result of an optimization design based on reliability and redundancy subject to cost in complex system is provided in the paper.
给出了一复杂系统在造价约束下的可靠度和冗余数的并发优化设计结果。
Based on the proposed rules, the percentile based optimization model for robust design was presented, which assured a product's reliability and quality robustness to the noise.
在该设计准则的基础上，建立了产品健壮设计的分位数优化模型，保证了所设计产品的抗干扰能力和可靠度。
At present, modern design methods such as finite element analysis, optimization design, reliability design and etc. are gradually applied in the automotive transmission developing work.
目前，在汽车变速器的开发中，有限元方法、优化设计和可靠性设计等现代设计方法逐步得到应用。
For the first time, the fuzzy optimization theory is applied to study the principle and method of the two objective fuzzy reliability optimum design of acceleration switch with cross springs.
首次应用模糊优化理论研究叉簧式加速度开关的双目标模糊可靠性优化设计原理和方法。
The plan carrying on the fuzzy reliability optimization design to the spur gear drive will be more economical, reasonable and suitable.
对直齿圆柱齿轮传动进行模糊可靠性优化设计，设计出的方案更经济、合理、适用。
The paper discusses the combination of reliability design and optimization design leading to the reliability optimization design of aviation gears transmission for an optimization project.
将可靠性设计和优化设计结合起来，对航空齿轮传动进行可靠性优化设计，以得到最佳的设计方案。
This article designed the conveying machine using fuzzy reliability-optimization design theory and the dynamic simulation technology to adapt the work requirement well.
本文利用模糊可靠性优化设计理论和虚拟仿真技术对输送机进行了新的设计，使其更好地适应工作要求。
In this paper we take an actual project as example, did some research on the structure's seismic reliability analysis and optimization Design.
本文以一个实际工程为例，对其进行了结构抗震可靠度分析和优化设计计算。
Based on reliability data, regard design wind pressure as an optimization factor, conclude a convenient and effective design optimization method.
在基于可靠度的基础上，以设防风压作为优化参数，从而得到切实可行而又非常有效的优化设计方法。
This paper carries on a series of in-depth and systemic theoretical study on engagement theory, kinematics, reliability theory, optimization design and manufacturing process.
本文从啮合理论、运动学、可靠性分析、优化设计、加工制造及性能测试等方面对摆动活齿传动进行了一系列系统、深入的研究。
Through description of the inverse technique based on general optimization, this thesis studied the reliability and feasibility of applying this technique to mechanical design.
本文通过对广义集成优化反演法的论述，结合两个研究对象分析了该技术应用于机械设计的可行性。
Therefore, the optimization of cable bridge design, finite element analysis, safety and reliability of gradually drawed people's attention.
因此索道桥的优化设计、有限元分析、安全性及可靠性逐渐引起人们的重视。
In consideration of cost and whole life loss expectation of product, the whole life optimization design model with control parameter of dynamic reliability is proposed.
在同时考虑产品成本价值和全寿命期失效损失期望前提下，提出了以动态可靠度为控制参数的全寿命优化设计模型。
Program for optimization is developed and the correctness of this optimum design method and the reliability of program run are verified through practical product instances.
并通过生产实例验证了本优化设计方法正确性和程序运行的可靠性。
Comparing with traditional methods, the reliability robust optimization design information of automobile front-axle can be obtained accurately and quickly by the proposed method.
与传统方法相比，该方法更能迅速准确地得到车辆前轴的可靠性稳健优化设计信息。
Among the existing optimum design models, majority only aim at the optimization which just in the definite conditions and the factor of structural reliability is ignored.
现有的结构优化设计模型绝大多数是针对确定性情况下的优化，对工程结构的可靠度考虑不多。
This thesis describes the design and optimization of the reliability design method.
本论文主要介绍了可靠性设计方法和优化设计方法。
Applying optimization design technology and the reliability theory a reliability-optimum design method of variable load cylinder helix compression spring is presented.
利用优化设计和可靠性设计方法，提出变载荷圆柱螺旋压缩弹簧的可靠性优化设计方法。
The reliability sensitivity is added to the reliability-based optimization design model and the reliability-based robust design is summed up as a problem of multi-objection optimization.
把可靠性灵敏度融入可靠性优化设计模型之中，将可靠性稳健设计归结为满足可靠性要求的多目标优化问题。
The reliability and anti-jamming design of the equilibrium system were studied, and the reliability of the system was improved by the optimization of the hardware and software design.
对本设计的均衡系统的抗干扰设计进行了研究，通过硬件布板设计和软件模块化设计提高了系统的可靠性。
Based on the combination of the reliability design and optimization design, the mathematical model was created for the optimization-reliability design of the reducer to minimize its volume.
在将可靠性设计方法与优化设计方法相结合的基础上，建立减速器以体积之和为最小的可靠性优化设计的数学模型。
Based on the combination of the reliability design and optimization design, the mathematical model was created for the optimization-reliability design of the reducer to minimize its volume.
在将可靠性设计方法与优化设计方法相结合的基础上，建立减速器以体积之和为最小的可靠性优化设计的数学模型。
应用推荐