The inter-stand tension can be changed by adjusting the roll gap or the roll speed.
利用动态连轧理论分析了辊速和辊缝对出口厚度和张力的影响。
In the event of a stall, immediately open the roll gap and turn off the cooling water.
在轧机发生事故时，应快速打开轧辊间隔，关掉冷却水，去掉辊身上卷曲的带钢。
The features of roll gap in different cross schemes of roller arrangement were studied.
对不同轧辊交叉方式的辊缝特性进行了研究。
On the theoretical basis, the compressing roll gap was increased and buckling was reduced.
在理论分析的基础上，提高了压紧辊的间隙，减少了失稳弯曲。
Plastic deformation is easy to occur on the surfaces of plate and strip in the roll gap of pinch mill.
在板带递送机辊缝变形区中，板带表面容易发生塑性变形。
Not all rolling incidents such as stickers or stalls and wrong setting of the roll gap must necessarily lead to severe damage.
事故的发生，如粘接、卡带或辊缝间隙设计不当不一定都会引发轧辊的损坏，事故之后对轧辊正确处理非常重要。
The differential equations of continuous rolling tension and roll gap are the essential conditions. This comprehensive and integrated -rolling model comb…
连轧张力差分方程和辊缝差分方程是实现分离控制的必要条件，综合集成轧钢模型将人工智能和数学模型融于一体。
This paper introduces the controlling method to do roll gap regulation used of ABB MASTER system on medium small section mill of Laiwu iron and steel group co.
介绍了莱钢中小型轧钢车间轧机采用ABBMASTER系统进行辊缝调整的控制方法。
Combined with practical situation, the model accuracy was verified, further the model calculation can lay solid foundations for online calculation of roll gap.
结合现场实际，验证了模型的准确性，为在线计算出口辊缝提供了思路和依据。
This paper introduces the operation principle of the author developed equipment for measuring roll gap and ellipticity of the guide roller in continuous caster.
文中介绍了作者研制的连铸导辊辊缝和椭圆度测量装置的工作原理及测头结构。
The influence of the roll gap change and roll speed change on the exit thickness and the inter-stand tension is computed with the dynamic continuous rolling theory.
研究结果表明：对于四道次轧制的情况，辊速和辊缝在正向轧制时对出口厚度的影响大于逆向轧制时的影响；
The rate of nomal fracture is keeped about 97% by optimizing roll gap shrinkage and strengthening management of second cooling and Fan-paragraph, according to now level of casting machine.
并根据连铸机现状水平，采取优化辊缝收缩方案、加强二冷系统和扇形段的管理，使得高强船板断口合格率稳定在97%左右。
The influence of work roll′s bending force on roll′s bending deformation, roll gap geometry and exit thickness is investigated under the conditions of different width and thickness of sheet.
研究了不同宽度和厚度下工作辊弯辊力对辊系变形、辊缝形状及轧件出口厚度的影响规律。
Hydraulic gap control system is the key part of accuracy for stripe gauge control of tandem cold rolling mill. Hydraulic screw down system is the most important part of hydraulic roll gap control.
液压辊缝控制系统是冷连轧机组控制带钢厚度精度的关键环节，液压压下系统是液压辊缝控制的最重要的组成部分。
Chief parameters of aided reel roll includes tight pressure, send entrance force, roll gap and distributed position, determination of that is great importance to design and control for down coilers.
助卷辊主要参数包括压紧力、送进力、辊缝值和分布位置的确定，对地下卷取机的设计和控制具有十分重要的意义。
More experienced entrepreneurs jump that gap quicker and usually with better success, and, in The Times when they make bad decisions, they know how to tuck and roll and keep their eyes forward.
越是经验丰富的企业家越是快速跨越隔阂并获得成功，甚至，在下坏决定前悬崖勒马。他们知道怎样亡羊补牢，并时时刻刻瞻仰未来。
The machine is fixed by the motor and roll and roll to mobilize, the base, into the hopper of the clay through the cylinder gap was crushed.
本机是由电动机及固定辊和可调动辊、底座、进料斗组成，粘土通过滚筒间隙而被粉碎。
If the side bearing gap is too big, it will not restrain efficiently the rolling of car-body when roll restoring moment is not sufficient.
而过大的旁承间隙又使旁承在侧滚回复力矩不足时不能有效抑制车体的侧滚。
A new work roll contour is advanced which is a linear variable crown (LVC) roll. This roll contour can realize linear ratio of gap crown and strip width.
提出一种新型线性变凸度工作辊辊型即lvc辊型，这种辊型实现了辊缝凸度调节与板宽成线性化。
LVC (Liner Variable contour) is a new type of work roll contour. Gap crown can linearly vary with strip width by use of the contour and strip shape performance can be adjusted through shifting.
工作辊辊型是一种新型辊型，这种辊型实现了辊缝凸度随板宽变化成线性变化，并可以通过窜辊来调节板形性能。
The mathematic model of the influence of roll crown variation on gap setting can be got by regression based on lots of calculation results.
并基于不同条件的计算结果，回归出轧辊凸度变化对辊缝设定影响的计算模型。
Twin-roll casting hydraulic AGC system is designed to adjust the gap between double rollers and improve it's control accuracy, response accuracy and stability.
通过设计双辊铸轧液压A GC系统来调节辊缝间隙，提高其控制精度、响应速度和稳定性。
The die lips are V-contoured to minimize the air gap between the die and the roll nip whenever necessary.
模具口是V型的，为了随时减少模具和辊轴间的空气间隙。
These provide theory basis for inner roll-gap gauge-control system of HCW strip mill.
为内辊缝控制的HCW轧机厚控系统建模提供了理论依据。
By the influence function method the influence of plate width, work roll radius, backup roll radius, work roll crown, backup roll radius and rolling force on gap setting were calculated.
根据影响函数法计算轧辊凸度对辊缝设定的影响，当保持工作辊和支承辊凸度不变，则轧制力与辊系弹性变形呈线性关系，工作辊和支承辊凸度的变化对直线的斜率几乎没有影响。
The roll-gap taper isremotely adjusted and with the application of dynamic soft reduction the special demands for transientcasting conditions can also met.
遥控调整辊缝锥度和动态轻压下的应用，也能满足瞬间浇铸条件的特殊要求。
The result is that the AGC system of locking mill elastic extension is better than that of locking roll-load and mill gap.
结果表明：锁定轧机弹跳量的AGC系统优于锁定轧制力和辊缝的AGC系统。
By the technique of intermediate roll shifting, the HC-mill's gap stiffness and the shape control ability is improved significantly.
HC轧机采用中间辊轴向窜动技术，使轧机的横向刚度显著增加，提高了板形控制能力。
By the technique of intermediate roll shifting, the HC-mill's gap stiffness and the shape control ability is improved significantly.
HC轧机采用中间辊轴向窜动技术，使轧机的横向刚度显著增加，提高了板形控制能力。
应用推荐