Proper unloader setting allows a small amount of continuous bypass (approximately 5% of total flow) to minimize the pressure spike and compensate for nozzle wear.
正确的减压器设置允许少量的连续旁路（约总流量的5%）来减少减荷器压力以及补偿喷嘴磨损。
Altimeter SETTING, the adjustment of the altimeter to account for local variations in atmospheric pressure.
高度表设定，根据当地大气压力变化而对高度表所做的调整。
The compressed air drying of water vapor pressure points with any expressed as the air pressure in particular piping system of compressed air does not occur within the lowest temperature setting.
干燥器中压缩空气的水蒸气含量用压力凝露点表示，即在特定压力的空气管线系统内压缩空气不发生凝结的最低温度。
The horsepower available and the lowest pressure rating of any component limit the pressure setting.
可用的马力和任何部件的最低压力限制了压力的设置。
Using numerical simulation software, with setting different gas pressure in pipe, the pressure loss coefficient of inner-cone flowmeter was simulated.
利用数值模拟软件，通过改变管道内气体的压力，对内锥流量传感器的压力损失系数进行模拟研究。
The loading unit realized the recycle of power as well as the perfect loading for constant torque by means of setting up pressure in advance.
加载单元，不仅能实现功率回收，还可通过预建压的方法，实现理想的恒扭矩加载。
The maxim setting depth of tubing is related to its strength, density, inner and outer pressure difference as well as wellbore fluid's buoyant force to tubing string.
油管的最大下入深度与油管本身的强度、密度、油管内外压差、井中流体对油管柱浮力有关。
The author describes the fuzzy control towards high pressure air valve in raw coal separation system, including fuzziness of input, setting up of fuzzy control rules and certainty of outputs.
论述了如何对原煤分选系统中的高压气阀进行模糊控制，其中包括输入量模糊化、模糊控制规则的建立及输出量的清晰化。
The author describes the fuzzy control towards high-pressure air valve in raw coal separation system, including fuzziness of input, setting-up of fuzzy control rules and certainty of outputs.
论述了如何对原煤分选系统中的高压气阀进行模糊控制，其中包括输入量模糊化、模糊控制规则的建立及输出量的清晰化。
As thermal expansion conditions develop, pressure builds up to the setting of the relief valve. This will cause discharging of small quantity of water.
随着热量的增加，压力也随着增加，并达到安全阀的压力设置。此时将导致安全阀排泄出少量的水。
The factors affecting the crimpability of PAN staple fiber include the overall denier of tows, crimp box height, crimping pressure and temperature, tow tension and width and heat setting temperature.
影响腈纶短纤维卷曲性能的主要因素有丝束总线密度，卷曲箱高度，卷曲压力温度，丝束张力，宽度及热定型温度。
The static pressure loss coefficients, total pressure loss coefficients and flow outlet Angle distribution are simulated in conditions of different setting angles.
分析在不同叶片安装角下，叶片表面静压系数、出口总压损失系数和出口气流角的变化规律。
Experimental and numerical results show that the mechanisms of crack coalescence is controlled by the geometric setting of the flaws and the confining pressure.
结果清楚显示裂纹贯通机制主要受加载条件与预置裂纹几何分布的影响。
The invention discloses a method for controlling cooling medium supplementation of an air-conditioner, which comprises the following: a stage of setting system pressure while leaving factory;
本发明公开了一种空调器补充冷媒的控制方法，包括：出厂时设定系统压力的阶段；
This paper provides the method on setting internal and external leakage of pneumatic cylinders through measuring the differential pressure.
提出了差压检测法检测气缸的内外泄漏。
The CT held by the gripper blocks is loaded by axial force, pressure of inner fluid and gripping force, and its forcing state influenced setting depth and the ability of anti-collapsing.
夹持块内的连续油管同时受到轴向力、均布内压和夹持块的夹持力的作用，其应力状态直接影响到连续油管的下入深度及其抗挤毁能力。
The results showed that choosing of proper manners of surface treatment and adhesive coating as well as setting of pressure, thickness of adhesive and curing condition were helpful to improve t...
结果表明，在粘接过程中采用适当的表面处理方法、涂胶方式，确定适当的加压压力、涂胶厚度和固化条件，有利于减小粘接件拉伸强度数据的分散性并提高粘接强度。
It is concluded that the turn monolith is very sensitive to the side pressure, and setting the small units has little influence to the structure of the monolith.
结果表明：拐弯坝段对侧向推力很敏感，增设小机组对该坝段结构影响不大。
To assess the effects of negative pressure wound therapy (NPWT) for treating leg ulcers in any care setting.
评估在各种照护环境下，负压伤口疗法(NPWT)治疗腿部溃疡之成效。
Only pressure value needs setting, and after hundreds times of rapid take-off, drop pressure value and the sealing do not change.
只需要设定多大压力，数百次迅速起跳，回落压力值不变，密封性不变。
Some main factors affecting the permeability of cossettes, such as temperature, pressure, time, knife setting and even of cossettes are tested and all of them have differences in comparison tests.
用主要的工艺参数，温度、压力、时间、切丝机装刀刀高、菜丝均匀度等作为试验因素，研究其对菜丝渗滤半的影响。结果显示，后者均有明显的反应。
The housed design of the TCV allows for minimum pressure drop when a light spring setting is used.
当弹簧强度很小的时候，TCV的封装设计可以实现最低的压降。
The housed design of the TCV allows for minimum pressure drop when a light spring setting is used.
当弹簧强度很小的时候，TCV的封装设计可以实现最低的压降。
应用推荐