The micro shear test could give a new way to evaluate the mechanical properties in weld joint of aluminium alloy.
微型剪切试验为铝合金焊接接头力学性能的评定提供了一个新途径。
This paper mainly studies the strength softening characteristic of loess-like soil by triaxial shear test on the basis of primary research productions of loess.
本文在黄土已有研究成果的基础上，通过三轴剪切试验对类黄土(黄土状土)的强度软化特性进行了重点研究。
Large scale triaxial shear test on spherical particle coarse aggregate is carried out.
采用大型三轴仪对球形颗粒散粒体进行了应变式三轴试验。
The simple punch shear test method is recommended to determine static or dynamic shear strength of rocks.
笔者还建议使用简易的冲剪法去确定岩石的动、静力剪切强度。
A direct box shear test on granular material is successfully simulated by means of distinct element method.
用离散单元法模拟了粒状体的直剪试验。
Recently, the main tests for the interface characteristics of reinforced soil are pullout test and shear test.
目前，国内外对于加筋土的界面特性试验仍然以直剪试验与拉拔试验为主。
This paper states straight shear test and common problems in test. It also puts forward relevant solving method.
本文论述了直剪试验的方法及在直剪试验中常见问题，并提出相应的解决方法。
Through shear test, effects of slope soil water content on soil shear strength of different vegetation were studied.
本文通过直剪试验，研究边坡土壤含水率对不同植被类型土壤抗剪强度的影响。
The steady state strength concepts, the consolidated-undrained triaxial shear test method and the test results are introduced.
介绍了稳态强度理论的基本概念、稳态强度的固结不排水剪切试验方法及试验结果；
Besides, correlation between the strength indexes of direct shear test and consolidated quick direct shear tests were studied.
此外，还对典型土层直剪试验和固结快剪强度指标间的相关性进行了研究。
VANE module for interpretation of vane shear test and making vane sounding logs (only for VST with full electronic registration).
解释十字板剪切试验，记录十字板探空（仅适用于完整的VST电子注册）。
The system is employed for confined and shear test. Then sand parameters are obtained through regression statistics of test data.
利用该系统进行沙土的承压及剪切实验，对实验数据进行回归统计分析，获得实验用沙土参数。
Finally use the dynamic three axle shear test to research impulsive load function under red clay mechanics and distortion characteristic.
最后通过动力三轴试验仪研究冲击荷载作用下红粘土的力学和变形特性。
The proposed mechanism could explain the phenomenon in direct shear test, and the calculated results coincided well with experimental results.
通过与前人的试验比较，表明提出的破坏机理能较好地解释试验现象，理论计算的峰值强度与试验实测值吻合较好。
The problems existing in large shear clamp for shear test of pins are analyzed in detail in this paper, and practical improvement method is given.
对现有的剪断销剪切试验用重型单剪装置存在的问题进行了系统分析，提出了对该重型单剪装置结构优化的具体方案和实施办法。
Finite element analysis software is feasible to simulate the failure analysis of tensile shear test, even partial replacement of shear tensile test.
证明用有限元分析软件对点焊结构进行失效模拟的可行性，甚至可以部分替代剪切拉伸试验。
On the large-scale triaxial test equipment, 3D shear test of polymer geogrid reinforced crushed gravel soil and non-reinforced soil were carried out.
在大型三轴仪上进行了素碎石土和加筋碎石土的三轴排水剪切试验，探讨了加筋碎石土的强度及变形特性；
Based on a large number of dynamic shear tests, several mechanical models of dynamic shear test of bulk materials have been established in this paper.
本文在大量动态直剪试验的基础上，建立了散体在振动场作用下剪切试验的几个力学模型。
Some behaviors of saturated flyash such as pore water pressure, dynamic strength, and dynamic deformation are studied by the dynamic torsional shear test.
通过动扭剪试验研究饱和粉煤灰的动孔隙水压力特性、动强度特性以及振陷变形特性。
The composite viscosity at the condition of dynamic shear test is consistent with shear viscosity at steady shear test at the low shear rate or low frequency.
在低频率(或低剪切速率)下，动态剪切测量的复合粘度与稳态剪切测量的剪切粘度是相等的。
This paper describes the correlation between the characteristic values of the micro shear test and those of the conventional tensile, fracture mechanical tests.
本文介绍了微型剪切试验与拉伸试验、断裂力学试验等参数之间的对应关系。
In this paper, shearing mechanism in the joint core region is analysed from crack to limit state, on the basis of shear test of wrapped steel joint under the monotonic load.
本文根据外包钢节点在单调荷载下的抗剪试验，分析了节点核心区在开裂状态之前及开裂状态到极限状态的抗剪机理，求出了各主要抗剪因素的剪力分配。
This paper introduces the experimental study of shear test under eccentric compression on space truss-concrete combined sandwich wall plate(in brief ZW sandwich wall plate).
研究了钢筋网架—砼组合结构夹芯墙板（简称ZW夹芯墙板）平面内偏压受剪的性能。
Some better ideas to solve the problems that existed in the repeated drained direct shear test, such as the test time is so long and the results of the test are not logical .
就现行排水反复直接剪切试验中所存在的问题，如时间长，试验结果不理想而提出了一些改进办法。
Taking the expensive soil in Nanyang Area, Henan Province, as study case, the in-situ shear test method, including preparing samples and test method, is proposed in the paper.
结合南阳地区膨胀土的抗剪强度研究，对其现场剪切试验的试样制备及试验方法进行探讨，提出了膨胀土抗剪强度的修改计算公式。
The characteristic values of micro shear test and tensile test of alloy aluminium were determined and the quantitative expressions of these characteristic values were studied.
测定了铝合金的微型剪切试验和拉伸试验的性能参数，研究了这些性能参数之间的数量关系式。
Direct tensile, acceleration, and shock wave tests belong to the tensile test group, whereas adhesive tape, direct shear, peel and scratch tests belong to the shear test group.
直接拉离、加速和冲击波等方法属于拉力法，而胶带、直接剪切、剥离和划痕等方法属于剪切法。
Meanwhile, the law of soft clay strength improvement is drawn from different consolidated pressure and different degree of consolidation by many consolidated-quickly shear test.
再通过大量的固结快剪试验，得到软粘土在不同固结压力、不同固结度下的强度变化规律。
With the development of the study, it is potential of the estimation-method to directly provide the parameters of the shear strength of rock joints replacing the direct shear test.
随着研究的不断深入，估算方法有可能替代直剪试验直接提供岩体结构面抗剪强度。
With the development of the study, it is potential of the estimation-method to directly provide the parameters of the shear strength of rock joints replacing the direct shear test.
随着研究的不断深入，估算方法有可能替代直剪试验直接提供岩体结构面抗剪强度。
应用推荐