Rocks underwent strongly shearing deformation. The mineral deposit type belongs...
矿区内岩石剪切变形明显，矿床类型为沉积改造型。
The transverse shearing deformation and rotational inertia are taken into consideration in the chosen thick plate strips.
所取厚板条考虑横向剪切变形和转动惯量，并取它的各阶振型为条向连续函数。
The rock group is characterized by a general order but internal disorder because of intense ductile shearing deformation.
其特点是整体有序，组内无序，韧性剪切变形强烈。
The result also denotes the shearing deformation and rotary inertia of the beam have significant effect on the high frequency.
当考虑梁的剪切变形和转动惯量时，则对梁的高阶频率影响较大。
The mineralization mechanism is that the brittle-ductile shearing deformation dynamically resulted in diagenesis and mineralization.
其成矿机理是脆韧性剪切变形动力成岩成矿。
When displacement and force iterative formulae are derived, the bending deformation and shearing deformation are taken into account.
文中推导了位移及力的迭代公式，其中考虑了多阶剪力墙的弯曲变形及剪切变形。
The influence of shearing deformation causes the non-uniform stress in the wing plate of the box girder, especially the cantilever box girder.
剪切变形的影响使得箱形梁的翼板中出现应力不均匀现象，尤其是悬臂箱形梁剪力滞现象。
With the shearing deformation theory and deductive theory, the calculational formulas of flexibility coefficient of the pile head can be obtained.
采用剪切位移法，利用递推原理导出桩顶柔度系数的计算公式；
Shearing Angle can be adjusted within a certain range, which can reduce the shearing deformation of sheet metal and can shear much thicker sheet metal.
刀架剪切角能在一定的范围内调整，可使剪切材料变形量减小到理想状态，又可剪切超厚板料。
The hysteresis loop, stiffness digration, energy dissipation, ductility, reinforcement strain and shearing deformation of core of beam-column joints are studied.
试验从滞回曲线、刚度退化、能量耗散、延性、主筋应变及节点核心区剪切变形等方面进行了研究。
Finally, some examples are given to show the effect of shearing deformation, the hole size, the position of linear load and the geometrical parameter on the critical load.
最后，本文以实例分析讨论了横向剪切变形、开孔大小、线布载荷位置和几何参数对临界载荷的影响。
The high natural frequencies of symmetrical section beam with different constraints are calculated in detail, and effects of rotary inertia and shearing deformation are given.
计算了对称截面粱在不同边界条件下的高阶固有频率，讨论了转动惯量及剪切变形效应对各阶固有频率的影响。
Thus the effect of transversal shearing deformation on the buckling characteristics of composite laminated plates can be investigated more accurately by means of the modified model.
改善后的模型能较好地反映横向剪切效应对复合材料层板屈曲特性的影响。
On the basis of load transfer mechanism and destruction patterns of single pile, load transfer method and shearing deformation method for subsidence computing of single pile are mainly discussed.
在分析单桩的载荷传递机理、单桩的破坏模式的基础上，重点探讨了单桩沉降的载荷传递法和剪切变形法。
Aimed at the bend of poplar-straw laminated beam, the theory of delamination shearing deformation was used to analyse its bending deflection and strength, and compared the results with other theories.
针对杨木—秸秆层合梁的弯曲问题，利用分层剪切理论对其变形和强度进行了分析。并将分析结果与经典理论、一阶和高阶剪切变形理论的结果进行了比较。
Torsion is the use of rotational pressure (torque) on a component. Twisting and torque and included in this category. Causes shearing, compression, and deformation of components.
扭曲是在部件上施加旋转的扭力。通常使部件被切断，压缩和变形，扭转和扭曲同属于此类别。
The sheet metal shearing process is very complicated since the deformation is focused on the small zone of the sheet metal and ended with fracture occurrence.
由于在板材的剪切加工过程中材料的变形集中在很小的区域内，且以断裂方式告终，使得这一过程非常复杂。
The adiabatic shearing phenomena were often found in metallic materials under high-strain, high-strain-rate deformation.
绝热剪切是金属材料在高应变速率变形条件下常见的一种现象。
The rational determination of the flexural stiffness and the shearing stiffness of concrete filled steel tube is very important in the deformation calculations.
合理地确定钢管混凝土的抗弯刚度和剪切刚度是进行其变形计算的重要前提，目前国内外很少有系坑的研究和报道。
Basing on the elastic bending theory of beams in large deflection, the non-linear shearing behavior of cellular materials under large deformation is studied in the paper.
将梁的弹性大挠度弯曲理论应用于蜂窝壁板，研究了大变形条件下蜂窝材料的非线性剪切变形行为。
An approach using singular functions is propsed to solve the bending deformation and the transverse free vibration problems of beams in consideration of shearing.
提出一种考虑剪切变形影响时，求解梁的弯曲变形和横向自由振动的奇异函数解法。
The lateral deformation of multistory frame structure may mainly be shearing displacement between stories, and shearing model between stories may frequently be adopted in analysis of rigidity matrix.
多层框架结构侧向变形主要为层间剪切变形，其刚度矩阵常采用层间剪切模型；
The late ductile shearing(DF_2) formed in D_3 deformation phase is accompanied by the appearance of chlorite and barroisite etc. and dynamic recrystallization of albite, quartz and calcite.
晚期韧性剪切变形与区域D_3变形幕有关，伴随有绿泥石、冻蓝闪石等的出现和石英、方解石的动态重结晶作用。
The orientation of mylonites indicates that the ductile deformation is of right-hand shearing character in KSTB.
糜棱岩定向标本研究表明，构造带中韧性变形具有右行剪切特征；
The orientation of mylonites indicates that the ductile deformation is of right-hand shearing character in KSTB.
糜棱岩定向标本研究表明，构造带中韧性变形具有右行剪切特征；
应用推荐