Hinge? Designed to withstand the shock load of quick closing to insure longer life and continued shut-off.
铰链-能够承受迅速关闭而产生的冲击负载，确保使用寿命更长和连续关闭。
The problem how to act controllable shock load and how to measure the data under shock condition is thus solved.
从而解决了施加可控冲击载荷和冲击条件下数据测量的问题。
In this paper, laser holography on the photoelasticity of shock load and application of magneto-optic effect rotator is surveyed.
本文简述了激光动光弹全息摄影及磁光旅光器的应用。
During turbine working, the blade bears strong wind load, air erosion, shock load by minute rough granules, or impact by ultraviolet.
风力机在工作过程中，风机叶片要承受强大的风载荷、气体冲刷、砂石粒子冲击、紫外线照射等外界作用。
The energy absorbed by the vibration isolator increases with the increase of the shock load value when its impulse width is invariable.
其在承受冲击载荷时，在冲击载荷脉宽不变的情况下，随着冲击载荷幅值的增加，隔振器吸收的能量增大。
With very high locked-rotor torque and excellent performance in low frequency, it is suitable for situation with shock load to save power.
具有特高的起动转矩和良好的低频特性，特别适用于有冲击负荷的场合，在这种场合下使用比一般电机节电。
It is featured with very high locked torque and excellent performance in low frequency, suitable for situation with shock load to save power.
具有特高的堵转转矩和良好的低频及运行特性，特别适用于有冲击负荷的场合，在这种场合下使用比一般电机节电。
SBR has such features, as simple process flow, stable efficiency, small floor area, stronger ability for resisting shock load, convenient operation.
传统的SBR工艺具有工艺流程简单、处理效果稳定，占地面积小、耐冲击负荷能力强，操作灵活等优点。
General loading condition of rolling mill bearings is medium - heavy load and shock load, thus the most suitable material is carburising bearing steel.
轧机轴承一般载荷条件是中重载荷和冲击载荷，因此，最适用的材料为渗碳轴承钢。
The dynamic thermal stresses responses analysis model problems of metal-ceramic functionally graded materials (FGMs) under thermal shock load are studied.
研究了梯度材料在承受热冲击载荷作用时的动态热应力响应分析模型问题。
The running results showed that treatment efficiency of the technology is stable, tolerable in shock load and reasonable for the combination of processes.
工程实践表明，该工艺处理效果稳定、耐冲击负荷、工艺组合合理。
Traditional SBR has such features as simple process flow, stable efficiency, small floor area, stronger ability for resisting shock load, convenient operation.
传统的SBR工艺具有工艺流程简单、处理效果稳定，占地面积小、耐冲击负荷能力强，操作灵活等优点。
Spherical roller bearings are subjected to radial load, bidirectional axial load capacities and synthetic load more, suitable to withstand vibration and shock loads.
调心滚子轴承承受径向负荷，双向轴向负荷及其合成负荷的能力较大的场合，适合于承受振动，冲击负荷的用途。
It is important to provide balancing compensation for shock load because of the severe voltage fluctuation and 3-phase unbalance imposed on power supply system by it.
冲击性负荷会引起供电系统严重的电压波动和三相不平衡，对其进行平衡化补偿具有重要的意义。
The work principle of the viscous fluid damper under shock load is analyzed and the damping expression is derived, the parameters of which are determined using shock tests.
分析了冲击载荷作用下粘性流体阻尼器的工作原理，推导了阻尼力公式的表达式，运用落锤冲击试验确定了其中的参数。
The work principle of the viscous fluid damper under shock load is analyzed and the damping expression is derived, the parameters of which are determined using shock tests.
在对配电变压器冲击试验方法的研究基础上，提出在电站现场进行试验可以用氖管指示器代替示波器，使试验方法简化，故障判断直观、可信。
An anvil is impacted by the bullet from an air gun and hence a certain. initial velocity is obtained. Then the vibration isolator absorbs the shock load of the anvil"s inertia."
通过气体炮发射的炮弹撞击砧块，使之获得一定的初速度，再 利用砧块的惯性对隔振器施加冲击载荷。
In order to estimate the maximal shock load which could be withstood by the enclosure of switchgear, the FEM software ANSYS was introduced to analyze and calculate the shock load.
为了估算开关柜壳体所能承受的最大冲击载荷，采用大型有限元计算软件ANSYS进行了分析和计算。
Under shock load conditions the peak load can exceed the ultimate bending strength of the core material and fracture occurs, usually at the most highly stressed cross section area.
在冲击负荷下，最大负荷超过了轧辊芯部材料所能承受的最大抗弯曲负荷，发生截面断裂。断裂一般产生于负荷应力为最大的截面。
The result of experiments under shock loadings revealed that the constructed wetlands had a strong resistance to shock loading, and it could bear shortterm load of high concentration.
人工湿地在冲击负荷条件下的实验结果表明，该人工湿地能承受短时高浓度冲刷，耐冲击负荷能力强。
Main Appplications:Various eqmuipment for derricking, lifting and drawing; the rope with wire core can be used under the shock load, heated and squeezed conditions such as electric shares.
钢芯钢丝绳的主要用途：各种起重、提升和牵引设备，金属绳芯适用于负荷、受热和受挤压条件下，例如：电铲。
Several problems exist in the commonly used hydraulic balancing circuits, such as drift in re-lifting of suspended load and shock and Vibration in lowering.
工程机械常用的液压平衡回路，存在着悬垂负荷再提升下滑和下降冲击、振动的问题。
For medium and slow speed bearings operating under heavy load or shock-loading conditions.
适用于重负荷或振动工况下操作的中速或低速轴承。
Shock absorption system is equipped on the modern aircraft landing gear to alleviate heavy load efficiently.
为了有效避免载荷过大，现代飞机的起落架都装有缓冲系统。
Usually LED power and drive damage from the input power over power shock (EOS) and load side circuit fault.
通常LED电源和驱动的损坏来自于输入电源的过电冲击(EOS)以及负载端的断路毛病。
Shock wave and thermal load are the two main effects on the envelope during the discharge.
放电过程中，灯管主要受冲击波和热负载两方面的作用。
Soft and thin-bedded characteristics and dynamic load action from mining and blasting shock are some basic features of the actual mining roadways in coalmine.
围岩松软、呈层性显著以及受爆破震动和开采动载的反复作用是回采巷道的基本特征。
Gear defects Operating vibration, shock and noise, and generate dynamic load.
齿轮传动的缺点运转中振动、冲击和噪声，并产生动载荷。
Gear defects Operating vibration, shock and noise, and generate dynamic load.
齿轮传动的缺点运转中振动、冲击和噪声，并产生动载荷。
应用推荐