The data were analysed with SAS soft ware.
用SAS软件对数据进行统计学处理。
Optimum design of the composite shell of pulse motor has been presented using ANSYS soft ware.
采用ANSYS软件对脉冲发动机复合壳体进行了优化设计研究。
Other all systems soft ware and application software must depend on the support of the operating system.
其它所有的系统软件和应用软件都必须依赖于操作系统的支持。
The text introduces the whole design of the system detailedly, and also introduces circuit design of hard and soft ware.
本文详细介绍了系统的总体设计、硬件电路的设计和软件平台设计。
Geological data treatment is a part of the soft ware package for optimization of short-term plans in open pit coal mines.
地质处理是为露天煤矿研制的短期生产计划优化软件包的一部分。
Depending on MIS network system platform, get production datum by DCS system, develop power consumption analysis system soft ware.
依托MIS网络系统平台，通过DCS系统获取生产实时数据，开发应用了耗差分析系统软件。
The running control soft ware of FMS should have all the functions of controlling, managing and viewing so that it can be fully used.
FMS运行控制软件必须提供所有的控制管理及监视功能，使之得到充分利用。
So the establishment of a network security system is crucial and it involves aspects from the hard ware to the soft ware of the system.
因此，网络安全系统的构建是一个非常重要的问题，它涉及到从系统硬件到软件，从单机到网络的各个方面。
The function, form, controlling method and soft ware design of the computer controlled system for annealing furnace has been introduced.
介绍了金属退火炉微机控制系统的功能、组成、控制方法及软件设计。
An engineering soft ware adapted to the finite element analysis of three dimensional contact stress in aircraft cylindrical gears is provided.
提供了一个适用于航空圆柱齿轮三维接触应力有限元计算分析的实用工程软件。
Analyze reason causing vibration of the shell-and-tube heat exchanger; discuss preventing vibration measures with example by using HTRI soft ware.
分析管壳式换热器产生振动的原因，通过实例，利用HTRI软件讨论管壳式换热器防止振动的措施。
It is necessary to choose the right hardware, write the right soft ware and found the economical and applied low-frequency signal gathering system.
所以选用恰当的硬件，编写合适的软件，组建既经济又实用的压电加速度低频信号采集系统是十分必要的。
A soft ware which is based on the nutritional metabolism model for growing pigs has been developed and used to simulate daily gain of growing pigs.
在生长猪营养代谢模型的基础上，编制了生长肥育猪增重过程的模拟计算软件。
Hard and soft ware design, data processing and flow control techniques for measuring system of unmanned air vehicle container firing are introduced.
介绍了无人飞行器箱式发射检测系统的软、硬件设计、数据处理、流量控制技术等。
Taking an engineering project as an example, the seismic design of the structure is checked and the weak story is found with the help of TAT soft ware.
以一工程为例，结合软件TAT对该结构进行抗震验算，找出结构薄弱层。
The paper introduces the hard ware composition and soft ware design of computer control system of spark frequency of high pressure static dust extractor.
本文介绍了高压静电收尘器火花频度计算机控制系统的硬件组成和软件设计。
The fuction of automatic programming soft ware for NC machining is introduced. It is proved by model machined that this software is practical and useful.
介绍了涡旋槽数控加工自动编程软件的功能，经多台样机加工证明，该软件切实可行。
The description is made of the operating principle, performance index, features as well as the hardware and sensor design and the soft ware function design.
介绍了其工作原理、性能指标和特点，以及硬件、传感器设计和软件功能设计。
Methods: A soft ware was introduced developed by health examine center of our hospital, and then our opinions were put forward about some noticeable problems.
方法：介绍医院体检中心研发设计的《健康体检信息管理系统》，针对某些值得注意的问题提出对策。
In this paper, briefly introduce the operation principle to control the vacuum stability with the computer on slice and the detail method of hard and soft ware.
本文简要地介绍了利用单片机实现真空度稳定控制的工作原理，阐述了软、硬件的具体实现方法。
This system was applied to the city of NingBo, the thesis put forward the realization of system's truss as a whole and designed the soft ware of Data Service Center.
并把该项技术应用在宁波经济技术开发区路灯实验系统中，给出了系统总体构架的具体实现，设计了数据服务中心的软件部分。
The specialities of CAN bus are introduced. The design idea and realization method for the hard and soft ware of CAN communication card based on PCI bus are provided.
介绍了CAN总线的特点，给出了基于PCI总线的CAN通信卡的硬件、软件设计思路与实现方法。
A new method of on line measuring ac resistance at the joint of high voltage transmission line and its practice of soft ware and hardware are described in this paper.
介绍了一种高压输电线接头处交流电阻在线测量的原理、方法及软硬件的实现。
The soft ware on optimum design of movable core arc welding transformer was introduced and the selection of the object function on optimum design was discussed in this paper.
介绍了梯形动铁式弧焊变压器优化设计软件，并对优化设计中的优化设计目标问题进行了探讨。
That provides a theoretical basis for well testing analysis to dual percolation reservoir and shows a great priority and practicability of applied soft ware compiled actually.
这给双渗油藏的试井分析提供了坚实的理论基础，在实际编制应用软件的过程中体现了极大的优越性和实用性。
The paper analyzes the beating process of a paper mill and introduces the hard ware, network and implementation process of the soft ware and the attentions in the application of DCS.
分析了某造纸厂打浆的过程，然后针对其DCS实施情况，依次介绍了硬件、网络和软件的实现过程及注意事项。
The paper analyses for design of the old type of BOP and presents some problems of it in field application by using CAD soft ware to design a modified BOP avoiding shortage of former one.
对旧式防喷盒的设计缺陷进行分析，并指出实际应用中存在的问题。应用CAD软件设计制作的改进型防喷盒克服了原设计的不足。
The hard ware configuration and soft ware development of the proposed computeraided-dynamic-design system (CADD) are introduced, along with application examples in construction machinery.
介绍所研制计算机辅助动态设计系统（CADD）的硬件配置与软件开发，并以工程机械中应用实例说明。
Aimed at the steel shear wall with slit, a systematic research is done on the forced performance. By using the finite element soft ware ANSYS, the paper analyzes this lateral resistant member.
针对带缝钢板剪力墙，本文对其受力性能进行了系统研究，并用有限元软件ANSYS进行了分析。
Aimed at the steel shear wall with slit, a systematic research is done on the forced performance. By using the finite element soft ware ANSYS, the paper analyzes this lateral resistant member.
针对带缝钢板剪力墙，本文对其受力性能进行了系统研究，并用有限元软件ANSYS进行了分析。
应用推荐