This thesis designed a switch reluctance dynamo speed control system.
本论文设计了一个开关磁阻电机调速系统。
Pulse Width Modulation electronic speed control for highest efficiency.
脉宽调制效率最高的电子速度控制。
This paper describes the variable-structure speed control for a DC motor.
本文着重阐述直流马达调速系统的变结构设计。
The steady rotating speed control is achieved by phase-compensation in sector scan.
在扇形扫描中，马达稳速的控制是通过相位补偿实现的。
Controller: Pulse Width Modulation electronic speed control for highest efficiency.
控制器：最高效率脉宽调制电子调速器。
This paper introduces a high accuracy speed control system which adopts AC inverter.
介绍了采用交流变频器构成的一种速度精确控制系统。
The purpose of the idle speed control logic is to control engine speed at closed throttle.
怠速转速控制逻辑是用于控制节气门关闭后的发动机转速。
Speed control of drawing roller is one of the key technology for horizontal continuous casting.
拉坯辊速度控制是水平连铸工艺的关键技术之一。
The higher resolution provides greater accuracy and more precise speed control in your applications.
更高的分辨率在你的应用提供更准确和更精确的速度控制。
To achieve the high-performance speed control of PMSM, the influence of iron loss cannot be neglected.
为了达到永磁同步电机高性能速度控制，电机铁耗的影响不能忽略。
We ask them whether they will welcome your type of speed control and the increase mileage it will give.
我们问他们是否喜欢你们设计的那种速度控制以及将增加的里程。
Mark 15 valves have a plug-in base or manifold, a plug-in solenoid and an optional speed control sandwich.
马克15阀有一个基础或多方面的，一个插件螺线管插件和可选的速度控制三明治。
Servo motor control system Imported from Japan Panasonic, provide accurate displacement and speed control.
进口松下电机伺服控制系统，提供精确位移及速度控制。
Joystick with control keys and speed control system. Multi functional and comprehensive CMM operation unit.
操纵手柄，含功能键及速度控制系统，多功能的三坐标控制手柄。
Speed control Valves are available for controlling valve opening or closing speed with pneumatic actuators.
速度控制阀可以用来控制阀门气动执行器的开启或关闭速度。
The automatic current control and speed control of decoiler in pickling and cold rolling line are introduced.
介绍了配洗连轧线开卷机的自动电流控制和自动速度控制模式。
Mark 55 valves have a plug-in base or manifold, a plug-in solenoid and an optional plug-in speed control sandwich.
马克55阀有一个基础或多方面的，一个插件螺线管插件和速度的可选插件控制三明治。
The flow of each axle bush applies speed control valve to regulate, with high precision and low interference effect.
每个轴瓦的流量采用调速阀进行调节，精确度高，互相干扰小。
The fuzzy PID control strategy is applied to the closed loop speed control system to realize consistent speed control.
对其速度闭环控制系统，应用了模糊pid控制策略，实现了摊铺机恒速控制。
When the resin flow in the mold, the screw speed control and filled with resin after the pressure (pressure protection) control.
当树脂在模具内流动时，则控制螺杆的移动速度并在填充树脂后用压力(保压力)进行控制。
Results shows the feasibility of the proposed method, obtaining good speed control bandwidth while overcoming classic DTC drawbacks.
结果表明此方法的可行性，它在克服传统方法缺陷的同时获得良好的速度控制带宽。
In order to guarantee the machining surface quality, numerical control lathe generally has constant surface cutting speed control function.
为了保证加工表面质量，数控车床一般都具有恒表面切削速度控制功能。
In the path tracking module, adopt the beforehand aiming arithmetic based on PID controller, including the speed control and turning control.
在路径跟踪模块中，采用了基于PID控制器的预瞄控制算法，包括速度控制和转向控制。
Experiment results indicated that the servo controller possesses the characteristics of good speed control performance and anti-load-disturbance ability.
实验结果表明，所设计的伺服驱动控制器具有良好的速度控制能力和抗负载扰动能力。
To overcome the shortages of measurement and speed control of transfusion in the therapy, an intelligence speed control system for transfusion is developed.
针对人工点滴输液方式测量和控制输液速度的不方便，研制智能输液速度测控系统。
Also, the implementation of the hardware and software for speed control and protection with the results obtained from tests on induction motor performance is provided.
基于发动机感应性能测试结论，为速度控制和保护而工作的软、硬件实现也在本文中被阐述。
The speed control driving for fan-type load can save much energy, but it is not popularized for lack of simple, reliable and economical motor speed control device.
风机类负载采用调速驱动可节约大量能量，但由于缺少简单、可靠、经济的电机高速装置，该技术基本没有推广。
To meet the speed control and tension control optimization, tension control can use master speed roller control, direct tension control, tension control indirectly.
为满足速度控制和张力控制的优化，张力控制可采用主速度辊控制、直接张力控制、间接张力控制。
An example is the speed control system of a turbine-generator set in a power station, whose main purpose is to maintain the generator speed as nearly constant as possible.
电厂涡轮发电机组就是一个例子，它主要的目的是维持发电机的转速尽可能的接近于恒值。
An example is the speed control system of a turbine-generator set in a power station, whose main purpose is to maintain the generator speed as nearly constant as possible.
电厂涡轮发电机组就是一个例子，它主要的目的是维持发电机的转速尽可能的接近于恒值。
应用推荐