The focal points of steel rolling works in this and next year are pointed out.
提出今明两年轧钢工作的重点。
Roll pass on Angle steel rolling, I-beam rolling and U-section, etc. were intensively studied.
他对角钢孔型轧制的，工字钢轧制和U -型钢轧制等剧做过深入研究。
The centralized water handling technology of steel rolling system is introduced in this paper.
介绍了轧钢系统水集中处理工艺。
The advantage and forming of open slitting pass used in Angle steel rolling have been introduced.
介绍了在角钢轧制中，开口切分孔型的优点和构成，并对开口及闭口切分孔进行了受力分析比较。
The practical production show that the converter gas can be used in reheating furnace of steel rolling.
实践证明，轧钢加热炉使用转炉煤气是可行的。
This will bring out edge crack when strip steel rolling. This problem can be solved by annealing again.
导致轧制时出现边裂，采用重新退火，进行退氮处理可解决这一问题。
In order to exist in the grim situation now, the steel rolling enterprises must change traditional sense.
阐述了冶金企业在当前的严峻形势下，要求得生存必须转变传统观念。
A method to control the store heat stove in accordance with the recent status of steel rolling is introduced.
针对轧钢加热炉现状，介绍一种新型加热炉-蓄热式加热炉的控制方法。
Spindle breakage during hot steel rolling is a long standing problem encountered in an Australian steel plant.
热轧机伸缩轴断裂是澳大利亚某钢铁厂经常遇到的问题。
As a key equipment in bar mill, the normal operation of the cold shear will influence the steel rolling directly.
冷剪机是棒材生产线的关键设备，它的正常运行直接关系到轧钢生产。
The manufacturing and being in use quality control of forging steel rolling mill rolls was analyzed in this paper.
本文从制造和使用两个方面对锻钢轧辊的质量控制进行了分析。
Steels strapping machine is a specific equipment used for steels strapping and widely used in steel rolling plant.
钢材打捆机是钢材包装打捆的专用设备，主要应用于钢管等钢材的成形打捆。
This article introduces how to select and apply statistical methods in quality management in steel rolling process.
介绍了在轧钢生产的质量管理工作中如何选择和应用统计技术。
Improvement of precision of bar steel rolling size and performance forecast requires the bar steel precise counting.
随棒材轧制尺寸精度和性能预报准确程度的大幅度提高，对棒材的精确计数要求也越来越高。
The dynamic performance and more accuracy is mandatory in mill industry according to demand of steel rolling quality.
随着现代轧钢工业对产品的质量要求越来越高，对轧机传动系统也提出了高精度和高动态性能的技术要求。
This paper introduces the principle and application of the exchanger to the reheating furnace of steel rolling plant.
本文介绍了热管的工作原理，以及热管换热器在本厂轧钢加热炉上的应用效果。
Coiler is one of the most important assistant equipment for steel rolling. It is used to coil strip into coiled steel.
卷取机是一种重要的轧钢辅助设备，其用途是把轧制后的成品带钢卷成钢卷。
For its simple structure, low cost, high reliability and control accuracy, this system can be used in steel rolling process.
本系统结构简单、成本低、可靠性好、控制精度高，能够满足轧钢工艺要求。
All kinds of formulae calculating the spread of bar steel rolling have been analysed theoretically and evaluated by experiments.
从理论和实验两方面分析了现有各种确定型钢轧制宽展变形的方法。
The double radius ellipse pass is better than the one of single radius ellipse in the big round bar or big section steel rolling.
在大圆钢轧制或大断面轧件延伸孔型系统中，双半径椭圆孔型与单半径椭圆孔型相比，具有轧件易咬入、变形较均匀、孔型磨损小等优点。
Based on the above modules, schedule auto setup and full automatic steel rolling control for rolling production process could be realized.
通过各功能模块的协作，可以实现轧机生产过程的模型自动设定和全自动轧钢控制。
The paper introduces the measure and the effect of modification of realizing vaporized cooling of the whole steel rolling heating furnace.
介绍了营口中板厂轧钢加热炉实现全炉汽化冷却的措施和改造效果。
This paper introduces the process of water - cooled line from debugging to large quantity's production in GIS continues steel rolling mill.
本文介绍广钢连轧分厂引进的水冷线从调试到大批量生产的过程。
It can voluntarily regulate various parameters needed by rolling steel pipe and makes the system of steel rolling working in best value nearby.
网络自动调节轧制所需的各种参数，使轧钢系统工作在最佳值附近。
The flat die steel production line product; main product: high alloy flat die steel rolling program and pass design at Fushun Special Steel Co.
介绍了抚顺特殊钢有限公司模具扁钢生产线生产工艺；主导产品：高台金模具扁钢轧制程序设计及孔型设计。
The production of hot strip rolling is very important in steel rolling. Then the hot rolling control theory is the basic theory in hot rolling.
热轧带钢的生产在轧钢生产中占据重要的地位，而热连轧控制理论是热轧生产过程中的基础理论。
It can take place of rotating flow well and parallel flow pool, so as to put forward a new technique of SS wastewater disposal in steel rolling.
该装置能替代旋流井、平流池等大型构筑物，从而提出轧钢废水ss处理新工艺。
At a low steel rolling speed, the traditional AGC feedback control is not very good due to a long time delay caused by the thickness measurement.
在低速轧钢时，由于测厚仪测量值的长时间滞后，传统的后馈控制效果不好。
It is suitable for chemical, oil, solvents, pharmaceutical, food, light industry, textile, metallurgy, steel rolling, coking and other industries.
它适用于化字、石油、溶剂、医药、食品、轻工、纺织、冶金、轧钢、焦化等行业。
It is suitable for chemical, oil, solvents, pharmaceutical, food, light industry, textile, metallurgy, steel rolling, coking and other industries.
它适用于化字、石油、溶剂、医药、食品、轻工、纺织、冶金、轧钢、焦化等行业。
应用推荐