The element coupling shape function matrices are derived by means of geometrically nonlinear strain displacement relation under small deformation assumption.
利用几何非线性的应变-位移关系式，在小变形假设条件下确定了单元耦合形函数。
The element coupling shape function meatrices are derived by means of geometrically nonlinear strain displacement relation un-der small deformation assumption.
利用几何非线性的应变-位移关系式，在小变形假设条件下确定单元耦合形函数。
The elastic stiffness matrix and the geometrical stiffness matrix for a element of cylindrical shells been established by the relation ship of strain displacement in a lange deflection.
理论上采用大挠度的应变——位移关系，建立了圆柱壳单元的弹性刚度矩阵和几何刚度矩阵。
The observation of longitudinal horizontal displacement of an earth dam is to observe the relative strain of the length between two displacement points.
土坝纵向水平位移观测是观测两两位移点间长度的应变值。
Results show that the displacement and the stress magnitude change greatly after considering the effect of strain rate.
结果表明考虑应变率的影响后，梁的位移、应力大小都发生了较大的变化。
A displacement sensor of strain foil is designed aiming at the sheet shearing and blanking processes.
针对板材剪切与冲裁加工的特点，设计了一种应变片式位移传感器。
Acceleration, displacement and strain response from seismic tests for all main parts of the three types of heat exchangers were measured under both conditions with and without water.
在有水和无水条件下进行了该三台热交换器的地震响应试验，测得了热交换器中各重要部件的加速度、位移和应变响应值。
A displacement sensor of strain foil is designed based on the characteristic of sheet shearing and blanking process.
针对板材剪切与冲裁加工的特点，设计了一种应变片式位移传感器。
The relations between temperature, stress, strain and displacement on ductile shear zone are established by using theory of rheology and finite element method.
本文应用流变学有限元法，建立了韧性剪切带内的温度、应力、应变和位移之间的关系。
The process by which the displacement field is calculated from a given strain field is quite lengthy.
从一个给定的应变场去计算位移场的过程是十分冗长的。
Big error occurs when such plastic strain is simplified as the linear function of displacement.
若将其应变简化为位移的线性表达式，则存在着很大的误差。
It is proved that the computed results are in agreement with the experimental results by analysing the residual stress, strain and displacement of gun autofrettage.
通过对身管自紧的残余应力、残余应变及残余位移分析，证明其计算结果与实验结果相当吻合。
The stress, strain and displacement in pavement structure can be computed by the mechanical analysis program of the multilayer elastic system.
应用多层弹性体系力学分析程序计算路面结构的应力、应变和位移。
According to above results, the horizontal displacement and strain field caused by the main fault movement have simulated and showed the interactions among boundary faults.
依据上述反演结果，模拟了区域主要断层运动引起的水平位移、应变速率场图像，显示了边界断裂及其之间的相互作用。
Based on wave equation, the formula of displacement and strain in different section are derived, and the frequency equation is given.
从波动方程出发推导了各分段的位移及应变的表达式，同时给出了频率方程。
Form displacement, strain, length of crack and so on, we can see timber frame meeting the challenge of anti-seismic, the results show that the frame has good anti-seismic performance.
从试验中得到的位移、应变、裂缝开展等数据，可以看出木构架房屋满足抗震设防要求，具有很好的抗震性能。
The essential features of the method are to study displacement discontinuity problems in continuous displacement field and to simulate discontinuity by introducing enhanced assumed strain.
强间断法的重要特征是在连续的位移场中研究位移不连续的问题，通过在间断上引入附加应变来模拟间断。
The results are shown that the displacement, strain and shear strain of the clay soil foundation under the dynamic loads are larger than those under the static loads.
结果表明，动载比静载作用下的位移、应变、剪应变大得多，特别是对地基的浅表处影响不仅范围大而且深度加大。
The relation between the displacement of closing up to punch and strain for each metal particle in deformation region had shown by following the deformation trace of particle.
在跟踪金属质点位移轨迹的基础上，揭示了毛坯变形区各质点贴模位移与应变间的关系，从而明确提出了圆锥形件的成形机理。
The expression of strain modal is derived in detail on the basis of displacement modal.
从位移模态出发详细推导了应变模态的表达式；
Objective: To analyze the influence of different tilted angle on the distribution of the stress, strain and displacement on the implant_bone interface.
目的：分析不同倾斜种植对种植体界面应力、应变及位移分布状况的影响。
The strain distribution and displacement variation of multi-curvature revolving-shell in the hydro-bulge forming process was investigated by experimental method.
研究了多曲率旋转壳体胀形过程中各部分的应变分布及位移变化规律。
The theory can be used to study the distributed strain, strain rate, porosity and plastic shear displacement in fault band, which presents a new method for quantitative analysis of ductile shear zone.
梯度塑性理论可用于研究韧性断层带内部应变、应变率分布规律、断层带错动位移及带内孔隙度分布规律，为韧性断层带定量分析提供了新的手段。
The stress, strain, and displacement of component of the cutters have been simulated under different rotate speeds in ANSYS.
采用ANSYS进行了不同转速下高速面铣刀刀体、刀片、刀具附件等刀具构件、装配的应力、应变、位移有限元分析。
A simple and useful representation of the stress and strain components are obtained by displacement function.
用该位移势函数表示的应变及应力分量，其解答简捷适用。
ResultsCompared with the control group normal spine, the strain and displacement of the spine decreased 17-20% and 8% respectively after TSRH fixation.
应用TSRH内固定的脊柱应变、位移比正常脊柱对照组的应变、位移分别减小17—20％和8％；
The measuring results for the micro displacement and the strain indicate that the optic fiber strain gauge offers a monitoring method both strain and distortion.
通过微位移架上的位移测量实验与悬臂梁上的应变测量实验，结果表明该光纤应变片提供了同时适合于应变与形变的检测方式。
One main application of the speckle measurement method in experimental mechanics is to measure the displacement, strain, vibration and so on.
用散斑法测量无题的位移、应变、振动、等是散斑法在实验力学中的主要应用之一。
The experimental results show that this method is a feasible, fast and precise method for displacement and strain measurements.
实验表明，该多层平截算法是一种实用、速度快及精度高的位移和变形测量方法。
Acceleration sensor is used to test modal displacement, and strain sensors are used to test modal strain.
振动测试中分别采用加速度传感器进行位移模态分析以及电阻应变片进行应变模态分析。
应用推荐