The preconsolidation pressure is an important parameter for soil deformation calculation and strength analysis.
先期固结压力是土的重要力学特性参数，对变形计算和强度分析有较大影响。
Then, the fatigue strength analysis of K-joint is carried out.
然后对管节点进行了疲劳强度分析。
It plays role very important in longitudinal strength analysis to calculate hull load.
船体载荷计算对总纵强度分析起着非常重要的作用。
The finite element method has been used in strength analysis for a wire reel of ship elevator.
用有限单元法对缠绕式升船机卷筒的强度进行了分析计算。
The FEM software(ANSYS) is adopted for the strength analysis of slide block universal spindle.
滑块式万向接轴因其能在倾角较大情况下传递较大的扭矩而被广泛应用。
Strength of ship plates plays a significant role for the ultimate strength analysis of ship structures.
船体平板强度在船舶结构极限强度分析中起到十分重要的作用。
Calculation results show that nonlinear factors are important for fatigue strength analysis of ship structures.
计算结果表明，非线性波浪载荷对船体结构疲劳损伤分析具有重要影响。
We now propose that "deformation strength analysis" must be included in the strength analysis of control network.
文中提出变形强度分析的一些方法，通过控制网的实例分析说明其特点。
A reasonable result of frame strength analysis was obtained by both the photoelasticity and finite element methods.
利用光弹性力学、有限元计算方法，进行强度分析取得了可靠的分析结果。
In this paper, for strength analysis of cylindrical shells, model of ringed spline finite super - element is given.
提出一环状样条超级单元用于圆柱壳的分析。
The core technique of hyper firing-rate series launch is the design and strength analysis of the projectile structure.
弹丸结构设计及其强度分析是超高射频串联发射核心技术之一。
Cold extrusion punch is an important workpiece in punches and its strength analysis is a key component in punch design.
凸模是冷挤压模具中重要的工件，其强度计算是模具设计的一个主要课题。
Then, by using beam element and MPC184 element, the finite element model for strength analysis was setup and simplified.
然后利用梁单元和MPC184单元，建立了供强度计算的有限元模型并进行了简化。
Briefly described are the structure, main technical parameters and strength analysis calculation of the low-side flat car.
简要介绍了低边平车的结构、主要技术参数和强度分析计算情况。
The mathematical model of the strength of the flail block in a three-leg centrifuge was founded through the strength analysis.
通过对三足式离心机甩块的强度分析建立了甩块强度的数学模型。
We present a strength analysis method for the vehicle frame with series-arranged multi-spindle oil and air spring suspensions.
提出了一种串联多轴油气弹簧悬架车辆车架强度分析方法。
The method is of definite reference value for the strength analysis and movement of automatic machines of the automatic weapons.
该方法对于自动武器自动机的运动和强度分析具有一定的参考价值。
Focuses on the strength analysis of slipper type universal coupling which is the 650 rolling mills key load-supporting structure.
对650轧机关键受力部件——滑块式万向接轴进行强度分析计算。
Through the strength analysis of the main body, it verifies that blocking-wheel cylinder can bear impact loads by the gyral kilns.
通过对缸体结构的强度分析，验证了挡轮液压缸能够承受回转窑冲击载荷的作用。
So the research of numerical simulation on the laying process and strength analysis of wire rope has been carried out in this paper.
因此，本文进行了钢丝绳成形过程数值模拟和制品力学强度分析的研究工作。
The mathematical modeling, dynamic simulation and its strength analysis of the new stirring kneader are the center contents of this paper.
新型搅拌捏合机的数学模型建立、动态模拟及其强度分析均是本文研究的主要内容。
The strength analysis (especially elastoplastic analysis) of projectile on firing is one of the problems to be solved in projectile design.
弹丸发射强度的分析（尤其是弹塑性分析）是弹丸设计中有待解决的问题之一。
The fatigue and ultimate strength analysis of hull structure with two different butt-welding lines distribution was researched in this paper.
对两种不同对接焊缝布置下的船体结构进行疲劳强度和极限承载能力分析。
It has been found applications in many aspects, such as structure design, strength analysis, life estimate, and fracture safety analysis, etc.
这种方法在许多方面得到应用，如结构设计、强度分析、寿命估算和断裂安全分析等。
The structural features of a new type of railcar bogies are described. And the finite element strength analysis is made on the frame assembly.
介绍了一种新型轨道车辆转向架的结构特点，并对其构架总成进行了有限元强度分析。
The results showed that the simplified method is reasonable, safe, reliable, such as the structural strength analysis providing a numerical basis.
计算结果表明，该简化方法合理、安全、可靠，为该类结构的强度分析提供了数值依据。
This paper gives main functions of a general purpose program called SAPFEM for static strength analysis of structure by the finite element method.
本文介绍了作者研制的709机结构有限元静力分析通用程序SAPFEM的主要功能。
The author applied ANSYS finite-element standard calculation software through the strength analysis, which assured the reliability of the analysis.
在整个强度分析中，作者应用了ANSYS有限元标准计算软件，保证了分析的可靠性。
By means of finite element method, the strength analysis of light frame has been executed, and the result verifies the rationality of structure design.
采用有限元法对构架强度进行了计算分析，在对轻型构架的强度和力学特性有一定认识的同时，验证了结构设计的合理性。
By means of finite element method, the strength analysis of light frame has been executed, and the result verifies the rationality of structure design.
采用有限元法对构架强度进行了计算分析，在对轻型构架的强度和力学特性有一定认识的同时，验证了结构设计的合理性。
应用推荐