In August, Australia's largest steelmaker, BlueScope, cited the Australian dollar as one reason for its decision to shut a blast furnace and a hot strip mill, at the cost of perhaps 1, 000 jobs.
八月，澳大利亚最大的钢铁商，蓝璀钢铁(BlueScope)指出他们关闭一个炼铁高炉和热带轧机的一个原因就是澳元升值，结果是减少了1000个工作岗位。
Up to now, the system runs stably in Anshan Steel 2150 hot strip mill, and it has also been widely used in many domestic hot tandem rolling mills.
至今该系统在鞍钢2150热带钢轧机稳定运行，并推广到国内多条热连轧线。
Hydraulic Automatic Gauge Control (HAGC) system is an important large-scale core system in strip mill. It is a key to determine the steel band quality and the yield.
液压厚度自动控制系统(HAGC)是现代大型板带轧机的核心系统，其性能好坏或工作是否正常是决定钢带质量和产量的关键。
The shape meter is a detecting system fixed on the cold rolling strip mill which detects the strip shape to control product quality of strip and improve economic benefit.
板形仪是安装在冷轧带材轧机上的检测系统，用于检测带材板形，以控制成品带材的质量，提高经济效益。
These provide theory basis for inner roll-gap gauge-control system of HCW strip mill.
为内辊缝控制的HCW轧机厚控系统建模提供了理论依据。
Investigates the width prediction and setup of strip in rolling passes in a hot strip mill.
研究带钢热连轧生产线中成品带钢的宽度预报与设定。
The results of calculation is reliable and can be used as reference in hot strip mill design.
计算结果可靠，可供设计人员在设计热带轧机时参考。
It has been proved that high Cr cast iron rolls are fit for finishing mill of 1549 hot strip mill of Tisco.
介绍了高铬轧辊化学成分和生产工艺，实际使用证明高铬轧辊适合太钢1549热连轧精轧机组。
In this paper, we introduce methods of shape control and application of shape control in cold and hot strip mill.
本文介绍国外有关板形控制的方法及在冷、热板轧机上的应用。
The main process characteristics of cold rolled strip mill train imported for supporting construction are introduced.
引进配套建设的冷轧板带机组的主要工艺技术特点。
The total number of mills, productivity and characteristics of Chinese hot wide strip mill construction were introduced.
重点介绍了我国热轧宽带钢轧机建设的数量、设计产量、建设模式特点等综合情况。
Some methods and ideas for design of crank and connecting rod type crop shear in hot strip mill are supplied in this paper.
通过讨论，为热连轧曲柄连杆式飞剪设计研究提供一些思路和方法。
Problems existing in 2050 mm hot strip mill descaling station of Bao Steel Group are discussed and also the possible solutions.
介绍了宝钢2050热轧除鳞装置存在的问题及解决方法。
The reheating furnace in hot strip mill had high energy consumption, low heating quality, high metal loss and high failure rate.
针对热轧带钢加热炉能耗高、加热质量差、氧化烧损大、故障率高等问题进行技术改造，达到节能降耗的目的。
The thin strip rolling process of 4-high strip mill is simulated and analyzed by using 3-D elastic-plastic FEM with software MSC.
采用三维弹塑性有限元法对四辊轧机轧制薄带钢的过程进行了模拟。
The slab tracking system for hot strip mill is an indispensable part in the computer controlling system during continuous rolling.
热连轧机板坯跟踪系统是连轧过程中计算机控制系统不可缺少的部分。
This paper briefly introduces the major technical performances, basic design features and formation of the four-high cold strip mill.
本文简要介绍了四辊精密冷轧机的主要技术性能、设备的组成和特点。
The study on strip shape computational theory of strip mill is a subject which has important theoretical value and practical significance.
板带轧机板形计算理论的研究是一个具有重要理论价值和实际意义的课题。
Roughing setting up mathematic model is adopted in the width control of 1780 mm hot strip mill of Anshan Iron and Steel Group Corporation.
在鞍钢热轧带钢厂1780生产线的宽度控制中，主要采用了粗轧设定数学模型。
In a hot strip mill, runout table cooling is the most critical factor to determine final mechanical properties of product it makes. It is...
在热连轧的过程模拟中，层流冷却是决定产品最终力学性能的最关键过程。
A neural network multivariable simple adaptive control (NNMSAC) is proposed, disposing of decoupling control with looper system in hot strip mill.
针对现代带钢热连轧中活套系统的解耦控制问题，提出了基于神经网络简单自适应多变量解耦控制方法(NNMSAC)。
The traditional rolling force model of 4-stand tandem cold strip mill at Anshan Iron and Steel Corporation was analyzed, and some defects were found out.
分析了鞍钢冷轧厂4机架冷连轧机轧制力模型，指出了其存在的主要缺陷，并提出了改进方案。
Down coiler is one of the key equipment for hot strip mill, the deviation angle of tension roll is of great importance to biting into coiler successfully.
地下卷取机是热带钢连轧机的关键设备，张力辊的偏移角对于保证带钢顺利咬入具有重要的作用。
The test of double stepped backup rolls on 4 stand tandem cold strip mill at Anshan Iron and Steel (Group)Co. and the good results obtained are introduced.
简述鞍钢冷轧厂四机架冷连轧机采用双阶梯支承辊的试验及取得的良好成果。
Process automation system for Laiwu Steel 1500 mm hot strip mill is described, include system figuration, network, functions of middle ware and application.
介绍了莱钢1500热轧带钢过程自动化系统，包括系统配置、网络结构、中间件和应用软件的主要功能模块。
This paper also describes the successful application of optimized highly adaptive backup rolls on 4 stand tandem cold strip mill at Anshan Iron and Steel (Gr…
叙述了强适应性支撑辊在鞍钢冷轧厂四机架冷连轧机上的成功应用及取得的良好效果。
This paper simply analyses the work of the exisiting backup rolls, and brings forward a project to optimize the backup rolls on 4 stand tandem cold strip mill.
在简要分析原辊型配置应用情况的基础上，提出了对四机架冷连轧机支撑辊型配置（包括辊型曲线和辊型凸度）综合优化的方案。
For the present situation of rough rolling strip head and tail low width precision on hot strip mill, analysis the cause of strip head and tail width tolerance.
针对热轧带钢粗轧头尾宽度尺寸精度低的现状，分析了带钢头尾宽度超差的原因。
Hydraulic Automatic Gauge Control (HAGC) system is an important large-scale core system in strip mill. It is a key to determine the steel band quality and the yield.
液压厚度控制系统(agc)是现代大型板带轧机的核心系统，其性能好坏或工作是否正常是决定钢带质量和产量的关键。
The system of roll mill press down is controlled to compensate the thickness variation of the hot strip mill so as to improve the hot-rolled strip thickness accuracy.
从各种随机噪声的轧制力信号这一复杂高频干扰周期波中分离出偏心信号，控制轧机在压下系统实现对偏心的补偿，以提高热轧带钢的厚度精度。
应用推荐