A new material developed recently has a tensile strength higher than diamond, yet it's much more flexible.
最近开发的一种新材料的抗拉强度比钻石还高，而且柔韧性更好。
First proposed in the late 1800s, the theory relies on a property of water not commonly associated with fluids: its tensile strength.
该理论于19世纪末首次提出，其依据是水的抗拉强度，而水的这种特性通常与流体无关。
For testing the tensile strength and flexure strength of wire.
用于检测金属线材的抗拉强度，及弯曲试验。
Factory seized items: density, tensile strength, elongation at break.
本厂可检项目：密度、抗张强度、断裂伸长率。
Tensile strength and stiffness increase as skin thickness ratio increases.
拉伸强度和硬度随外壳厚度比增加而增加。
Has good abrasion resistance, elasticity, tensile strength and elongation.
具有很好的耐磨性、弹性、扯断强度及伸长率。
Silicon can obviously improve the elastic limit, yield point and tensile strength of steel.
硅能显著进步钢的弹性极限，屈从点和抗拉强度，故普遍用于作弹簧钢。
Relative density, tensile strength and elongation of samples were also measured and analyzed.
对烧结样的相对密度、抗拉强度、延伸率等性能进行了测定与分析。
On the contrary, the tensile strength of the system improve with the increase of epoxy content.
与此相反的是，此体系的断裂强度则随环氧树脂用量的增加而提高。
Marriage is love's crucible — it has the tensile strength to contain the heat of self-transformation.
婚姻是爱的坩埚——它拥有承受高温的抗张强度。
Is plated copper tensile strength and elongation being tested? If so, what is the test frequency.
有无对镀铜板进行抗拉强度和延长进行测试？如果是这样，你的测试频率是怎样？
Determining the quality indexes (CSP) of the yarn in Hank and its relative tensile strength (RS).
测得其的绞纱品质指标(csp)和单纱相对强力(RS)。
In addition, CF tensile strength decreased with relative humidity during preparation of specimens.
另外，样品制备时，随着相对湿度的增加，测得的碳纤维拉伸强度逐渐降低。
And the breaking point is given there in the third column, and we call that the ultimate tensile strength.
断点在第三列，有举出，我们称之为，极限抗拉强度。
Improvement in tensile strength to give body and texture by penetrating the hair reaching the inner cortex.
给头发提供一个穿透头发直达内皮层的提高抗拉强度的作用。
Improved tensile strength and elongation of ethylene propylene diene monomer compounds used for wire and cable.
提高电线电缆用三元乙丙橡胶材料的拉伸强度和伸长率。
Instead it was the guts of cattle that were selected for their tensile strength and strung for use on the courts.
它其实是用家畜的内脏制成的，因为质地坚韧，适合用在球场上。
In order to ensure tensile strength of prestressed member, the controlling prestress loss in construction is a key.
为保证预应力构件的抗拉强度，对于预应力损失的控制是预应力施工中的关键。
Fabric conveyor belts are made of various layers, where the tensile strength is provided by synthetic fabric plies.
织物输送带是由不同的层，其中拉伸强度是由化纤织物铺层提供。
So we're going to load it up to the point that it will break, and that allows us to measure the ultimate tensile strength.
我们将继续装物体,直到断裂点，这样我们就能测量到,极限抗拉强度的大小。
Applicable to high tensile strength metal grinding, such as general carbon steel, alloy steel, malleable iron hard bronze.
适用于中高抗张强度金属材料的磨削，如一般碳素钢，合金钢，可锻铸铁，硬青铜等。
Increase in the amount of MTES increases the tensile strength and decreases the ratio of elongation for breaking of the materials.
并且随着MTES量的增加，材料的拉伸强度增强而断裂伸长率逐渐降低。
The tensile strength and tear of aramid paper that papermarking for two is strong than the aramid paper which is papermarking for one.
分层抄造的芳纶原纸比一次抄造的芳纶原纸的抗张强度和撕裂度高；
The result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.
研究结果表明，复合材料的冲击强度、拉伸强度随玻纤用量的增加而提高。
The results showed that the compound could improve the scorch safety the compression set and the tensile strength of fluororubber compound.
结果发现：一羟基或羧基化合物能提高氟橡胶混炼胶的防焦烧性，并对压缩永久变形和拉伸强度等有一定的改善。
The tensile strength, heat resistance and processability of the system decrease slightly with the increase of superfine wollastonite amount.
随着超细硅灰石用量的增大，体系的拉伸强度、耐热性能和加工性能都稍有下降。
Bamboo has incredible tensile strength, meaning that it can withstand significant amounts of stress and is comparable to steel's tensile strength.
竹子有着不可思议的抗拉强度，也就是说它可以承受巨大的压力，可以与钢铁的抗拉强度相媲美。
The properties of coatings. e. g. tensile strength, expansion coefficient, wear volume under given conditions and porosity, etc. were tested.
测定了涂层抗拉强度、膨胀系数、一定条件下的磨损体积、气孔率等性能。
The experiments consisted of the measurement of yield stress, tensile strength and hardness for samples cut from various parts of the forging.
试验包括对取自不同锻造零件的试块的屈服强度、抗拉强度及硬度的测量。
The experiments consisted of the measurement of yield stress, tensile strength and hardness for samples cut from various parts of the forging.
试验包括对取自不同锻造零件的试块的屈服强度、抗拉强度及硬度的测量。
应用推荐