Layered fracture occurs after tensile test of high strength ship plate.
高强船板拉伸试验后出现断口分层现象。
The factors of the tensile test of carbon fibers were discussed in this paper.
本文讨论了碳纤维强伸实验的影响因素。
The fracture surface appeared intergranular crack, due to the oxide formed during tensile test.
拉伸过程中形成的氧化物夹杂成为裂纹源,断口表现为沿晶断裂。
The result of insitu-tensile test shows that the behavior of fracture is transcrystalline rupture.
扫描电镜下的原位准静态拉伸试验表明,合金的断裂行为是穿晶韧性断裂。
This paper discusses the fracture shape of the tensile test sample in practice teaching of mechanics.
本文就力学实践教学中拉伸试样断口形状问题进行探讨。
The superplasticity of TC6 alloy was studied by adopting this method in high temperature tensile test.
采用该方法对TC6合金进行高温拉伸实验,研究其超塑性性能。
Before completing linkage screw in the machining, finished products are needed to do the pre-tensile test.
连杆螺钉在加工完成后成品交验前,要求进行预拉伸试验。
A uniaxial tensile test method for measuring mechanical properties of MEMS thin film materials is presented.
介绍了一种用于MEMS薄膜材料力学特性测试的单轴拉伸试验方法。
The tensile flake of power station steel was investigated by using slow tensile test and scanning electron microscopy.
本文采用慢拉伸和扫描电镜观察,探讨了电站用钢中拉伸白点的形成过程。
Through study on triaxial tensile test of soil from the dike of Yellow River, a lot of beneficial results are achieved.
针对黄河大堤典型土质开展了三轴抗拉试验研究,得出了许多有益成果,并就具体应用方法进行了探讨。
The quasi-superplasticity of leaded brass for bearing cage was investigated through the constant velocity tensile test.
通过恒速拉伸试验,对一种生产保持架用铅黄铜的准超塑性进行研究。
This paper carries out an experimental study on axis tensile test of corroded RC tensile specimens under cyclic loading.
研究工作所取得的成果将为耐久性设计和检测现役结构的耐久性能提供科学依据。
To meet the needs of tensile test for small diameter bolt and screw, this article gives a design of tensile testing device.
针对小直径螺栓和螺钉的拉伸试验要求,设计了一种拉伸试验装置。
Traditionally, the uniaxial tensile test, relaxation or creep, are often used to study the viscoelastic properties of material.
测量材料粘弹性性质的传统方法是单轴拉伸松弛或蠕变实验。
The invention relates to a line material mechanical &electrical integration testing machine and dedicated tensile test stand thereof.
本发明公开了一种线路器材机电一体试验机及其专用拉力试验架。
The effect of deforming velocity on the tensile properties of the polyethylene film for packaging is studied by mechanical tensile test.
采用拉伸实验,研究形变速率对聚乙烯包装薄膜力学性能的影响。
If a tensile test specimen fails to meet the requirements of 7.4.2, two further test specimens shall be obtained for each one that failed.
如果抗拉强度试样不符合7.4.2的要求,对每一个不合格的试样再取两个试样进行试验。
The relationships between damage energies of HTPB propellants and storage ageing time were investigated by uniaxial repeated tensile test.
由单轴反复拉伸试验分别研究了含键合型防老添加剂和防老剂h的HTPB推进剂破坏能与贮存老化时间的关系。
ABS samples of physical aging and strain aging were studied by universal tensile test machine and differential scanning calorimeter (DSC).
用万能拉伸实验机和差示扫描量热仪(DSC)对物理老化和应变老化的ABS试样进行研究。
The effects of aging treatment on the microstructure and tensile properties of 2A97 Al-Li alloy, were investigated by tensile test and TEM.
通过拉伸测试和透射电镜分析,研究时效温度和时间对2A97铝-锂合金组织和性能的影响。
The micro process of crack initiation and propagation in H68 brass with low stock fault energy was observed by in situ tensile test in TEM.
采用透射电镜动态拉伸、原位观察研究了低层错能合金H68黄铜断裂的微观过程。
The backlight photography with single sample was used to measure the true stress-strain of the ductile material after necking in tensile test.
本文采用单试样逆光拍照法对延性材料拉伸试验缩颈后的真实应力-应变进行了有效的测量。
The results indicate that the alloy has good superplasticity. Using this method can shorten the time of tensile test and get a good elongation.
实验结果表明,该合金具有较好的超塑性,采用该方法进行实验,能缩短拉伸实验的时间,并且可以获得良好的伸长率。
The triaxial tensile test of remolded loess indicates that the tensile strength of loess is related to the confining pressure and water content.
重塑黄土的三轴拉伸试验表明,土体的抗拉强度与围压和含水率关系密切。
The modification effects on diglycidyl ether of bisphenol A(DGEBA, epoxy resin E-44)were studied by impact test, tensile test, bend test and SEM.
通过冲击试验、拉伸试验、弯曲试验和扫描电镜(SEM)观察等方法,研究了星形聚醚环氧树脂对E-44环氧树脂的改性作用;
This paper analyzes the uncertainty of tensile test measurement for square specimen and gives formulae to calculate the uncertainty of measurement.
对矩形试样拉伸试验测量的不确定度进行分析,得出了计算其不确定度的公式。
The influences of deformation rate on the mechanical properties of 304 austenitic stainless steel were studied by tensile test at room temperature.
采用室温拉伸实验研究了不同变形速度对304奥氏体不锈钢力学性能的影响规律。
Finite element analysis software is feasible to simulate the failure analysis of tensile shear test, even partial replacement of shear tensile test.
证明用有限元分析软件对点焊结构进行失效模拟的可行性,甚至可以部分替代剪切拉伸试验。
The microstructure was studied using metallographic microscope, and their mechanical properties were analyzed through tensile test and hardness test.
采用金相显微镜研究了其微观组织,并通过拉伸试验及硬度测试对其力学性能进行了分析。
The mechanical property of AZ31 magnesium alloy rolling sheet under different temperatures and strain rates was studied through uniaxial tensile test.
通过单向拉伸试验研究了AZ31镁合金轧制板在不同温度和应变速率下的力学性能。
应用推荐