The curing process of the mould was automatically controlled, and the property of the product was stable.
该模具硫化全过程采用自动化控制，保证了产品性能稳定。
It is found that T-M is storable and thermostable, and has slow and low liberation of heat in the curing process.
结果表明t - M具有优良的贮藏稳定性、热稳定性，固化放热量少、放热平稳。
Modifying the curing process according to the result of the kinetic study, we are able to reduce the curing time designed by Huang in 2001.
利用反应动力学所得的结果来设计硬化过程所需的温度与时间，可大大缩短黄宏文在2001年时所设计的交联时间。
External trough line and the tube are through a second compression molding, and the curing process is also made the appropriate adjustments.
外部槽线与管体经由二次模压成型，固化工艺也做了相应调整。
The curing process of coating was discussed, and the affecting factors were discussed by means of testing on mechanical properties of the material.
对涂料的固化工艺进行了探讨，通过材料力学性能的测试，讨论了其影响因素。
The curing process was followed by torsion-braid analysis. The factors affecting the mechanical properties of amino-alkyd resin have been discussed.
应用扭辫分析法跟踪固化过程，讨论了影响氨基醇酸树脂力学性能的因素。
The paper reviewed the use of dielectric analysis to study the curing process of thermosetting matrix system including organic coatings and composites.
本文介绍了介电分析法在热固性树脂及以其为基体的涂料和纤维增强复合材料固化研究中的应用。
The self-curing of amino resin during the curing process of amino-alkyd resin has been studied based on gelation theory by using the IR and torsion braid analysis.
本文以凝胶化理论为依据，应用扭辫分析和红外光谱分析法，讨论了氨基醇酸树脂固化过程中氨基树脂的自交联行为。
The curing process can be controled through optimum catalyst amount and curing conditions, sagging can be controled by rheology control agent. The test results were listed.
提出了该涂料的固化可通过优化催化剂用量和固化条件来控制，流挂可通过添加流动控制剂来控制，并列举了它们的试验结果。
It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.
结果表明热固性酚醛树脂的固化过程，首先是羟甲基发生缩合反应，缩合反应形成醚键是主要的。
The influence of the initial curing temperature on the curing temperature field and curing state field of tire was investigated by simulating the curing process of tire with a 3D FE model.
建立三维有限元模型模拟轮胎硫化过程，研究初始硫化温度对轮胎硫化温度场及程度场的影响。
Real-time Fourier-transformed infrared spectroscopy (FTIR) was used to monitor the curing process of hybrid sol, indicating the formed imide group decreased with increasing titania content.
通过实时傅立叶红外光谱（FTIR）研究了杂化溶胶的凝胶固化过程。采用热重分析研究了杂化膜在氧气和氮气气氛下的热降解行为。
It was very important for the improvement of the cured tobacco leaf quality to study deeply the regularity of the physiological and biochemical change in tobacco leaf during the curing process.
深入研究和全面了解烟叶在烘烤过程的生理生化变化规律，对提高烤烟的品质具有极其重要的作用。
Results WEISHUNING pellets show obvious analgesic effect. It can remarkably restrain the occurring of pylorus ligatured gastric ulcer and accelerate the curing process of gastric ulcer induced …
结果胃舒宁冲剂具有明显的镇痛作用，能显著抑制幽门结扎性胃溃疡的形成，并能促进醋酸烧灼性胃溃疡的恢复及体外抑制胃蛋白酶活性的作用。
To achieve a fast curing process, we deposit microwave energy to the spot where optical bonding is desired.
为了达到一个快速固化过程，直接将微波能量作用于需要进行光学粘合的地方。
Influencing of curing time on film hardness is discussed through modifying the ratio of paint and curing agent. The defects from spraying process and the countermeasures are narrated.
通过调整漆与固化剂比例，讨论了固化时间对漆膜硬度的影响，同时论述了喷涂过程中产生的缺陷和采取的措施。
As for curing process, the influence of dosage of curing agent and curing temperature on gel time was investigated.
在固化工艺方面，研究了固化剂含量和固化温度对于凝胶时间的影响。
The curing reaction process of bamboo liquefaction phenolic resin with different molar ratio was studied by non-isothermal differential scanning calorimetry(DSC).
采用非等温差示热量扫描DSC曲线方法探讨了竹材液化物酚醛树脂胶不同物质的量之比时的固化反应过程。
This process called curing, interferes with the growth of bacteria .
这个过程叫做“腌肉加工”。用来抑制细菌的滋生。
To determine the theoretical model of curing resin line in rapid prototyping, the scanning motion and curing process are particularly analyzed.
为了确定快速成型中树脂固化线条的理论模型，对扫描动作和固化过程进行了详细分析。
The purposes of curing, curing agents, curing methods, bio-chemical changes during the process of curing as well as affecting factors are detailed.
本文对肉腌制的目的意义、腌制材料、腌制方法及肉在腌制过程的生化变化、影响因素等进行了详细论述。
The results showed that a kind of fast curing novolac for shell process whose softing point is reasonable was easily prepared by compound catalysis.
试验表明，采用复合催化法很容易制备聚合速度快且软化点适宜的壳法用热塑性酚醛树脂。
The results showed that a kind of fast curing novolac for shell process whose softing point is reasonable was easily prepared by compound catalysis .
试验表明，采用复合催化法很容易制备聚合速度快且软化点适宜的壳法用热塑性酚醛树脂。
The appearance and chemical variation relationship of burley tobacco leaves in air curing process was studied.
对白肋烟晾制过程中烟叶外观变化与内在变化关系进行了研究。
The reaction process and curing mechanism were basically identical to the curing reaction of bisphenol A epoxy resin with anhydride in the presence of accelerator.
固化反应过程及固化机理与促进剂作用下酸酐固化双酚A型环氧树脂的反应基本相同。
The results showed that the activities of these three enzymes increase during the process of curing, but decrease during piling and drying.
结果显示，板鸭在腌制过程中，这三种酶呈逐渐上升的趋势，而在排坯和风干过程中，酶活性逐渐丧失。
The soft-mold aided co-curing process of composite grids structures is an advanced techniques with the characters of low cost, high efficient and high quality.
复合材料网格结构软模成型共固化工艺具有低成本，高效率和高质量的特点。
Based on the requirement of tire curing process, the reason of influencing result of deaerating heating analyzed, present the related self control solution.
根据轮胎硫化工艺要求分析了影响除氧加热效果的原因，提出了相应的自控方案。
The influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-DDS curing system as adhesive.
采用环氧树脂-DDS固化体系作为胶接剂，探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。
The influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-DDS curing system as adhesive.
采用环氧树脂-DDS固化体系作为胶接剂，探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。
应用推荐