This provides a good grounding in computer modelling and in the finite element method, in particular.
这提供了一个计算机模型，在良好的基础，特别是在有限元方法。
It compares the rigid limit equilibrium method with the finite element method.
比较了有限元法和刚体极限平衡法的优缺点。
The time domain finite difference and the finite element method are more convenient.
有限差分法和有限单元法在时间域里更为方便。
This dissertation successfully used cluster computing for solving large-scale linear algebraic equations problems when the finite element method (FEM) is applied in electrical prospecting.
本文成功地将机群计算应用到解决在电法勘探中使用有限元方法（FEM）时产生的大规模线性方程组问题。
We analyze the optimum result of Xiamen control airspace and put forward optimal algorithm based on the Finite Element method.
在对厦门管制区的优化结果进行分析的基础上，提出了基于有限元的优化方法。
The results showed that this technique could significantly save CPU time and data preparations in the condition of having a similar accuracy compared with the finite element method.
计算表明，这种计算方法与有限元相比，在保证具有相似精度的条件下能够节省CPU时间和数据处理工作量。
Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
在此基础上应用有限元法的通用软件ANSYS，对大型水轮发电机定子温度场进行分析与计算，绘制了相应温度场图。
For the plates with finite dimensions, the finite element method is used to obtain the stress distribution and stress concentration around the ovaloid opening.
对于有限尺寸板内开孔的情形，文中用有限单元法来分析腰圆形孔口的应力分布和应力集中。
The effects of matching materials on the brake temperature of braker were investigated by using the finite element method to simulate the temperature transient process of disc brake.
采用有限元法模拟盘式制动器制动过程瞬态温度场，研究了材料匹配性对制动器温度场的影响。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
By some cases the finite element method has improvement at calculating precision by a long way, and it is a kind of comparatively perfect method.
通过实例计算表明，有限元法在计算精度上有了大大的提高，是一种较为完善的方法。
With the constant improvement of engine design demands, the finite element method may be used in the design of major parts of engine and can meet the design needs of complex structures.
随着发动机设计要求的不断提高，应用有限元方法在其主要零部件设计上，能够符合复杂结构的设计要求。
In numerical computation by the finite element method it is also convenient to use the loading-unloading criteria and the constitutive equations formulated in strain space.
在有限元方法的数值计算中使用应变空间表述的加-卸载准则和本构方程也是很方便的。
The finite element method is used to analyze the relationship between strength and stress of the particle reinforced iron matrix composites and the shapes, sizes and fraction volume of the particles.
采用有限元方法分析了颗粒增强铁基复合材料强度和应力与颗粒形状、尺寸以及体积分数的关系。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
On the base of introducing the principle of the magnetic flux leakage (MFL) detection, the finite element method based on ANSYS used to simulate and analyze the MFL signal is presented.
在介绍漏磁检测原理的基础上，详细论述了利用有限元法分析缺陷信号的方法以及利用ANSYS对漏磁信号的仿真过程和仿真结果，并对结果进行分析。
It was universal to study ship's longitudinal strength by using the finite element-method.
目前国内外普遍运用有限元方法研究船体的总纵强度。
Theoretical analysis is done on the static and dynamic characteristics of the structure, differential equations are presented, and it is also verified by the finite element method.
同时对机构进行了静态和动态特性理论分析，提出了机构静态和动态计算解析式，并用有限元方法对机构动态和静态特性进行了验证。
In the finite element method, one of the restrictions on the approximating functions is relaxed.
在有限单元方法中，放开了定近似函数的限制。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
The thermal stress distribution of the stainless steel lined composite steel pipe prepared by centrifugal-SHS process was calculated by the finite element method under thermoelastic assumption.
用有限元方法计算了铝热离心法制备不锈钢内衬复合钢管过程中的残余热应力分布。
According to the measured results, a reasonable boundary condition can be set up and then the field distribution can be calculated by using the finite element method.
按测量结果，确定了一个合理的边界条件，用有限元法模拟计算了沿轴场分布。
Based on the deployable structure of a mirror and the operation principle, the finite element method was used to analyze the unit naked mirror and some different mirror support schemes.
基于展开镜结构工作原理，运用有限元方法分析了展开式反射镜单元的裸镜及其支撑方案。
Computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.
本文应用有限元法，对6125Q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。
Computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.
本文应用有限元法，对6125Q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。
应用推荐