The scope of the residual stresses determined by the hole drilling method should not exceed one half of the material's yield strength.
钻孔法测量残余应力的范围是应力不超过材料屈服极限的一半。
The theory on the measurement of the residual stresses by the hole drilling method was introduced, and the relationship between the relieved strains and the residual stresses was given.
介绍了小孔释放法测量残余应力的原理，给出释放应变与残余应力之间的关系公式。
The relieved coefficients during the measurement of the residual stresses in the fiber reinforced composites by the hole drilling method were given with conversion of the two coordinate systems.
针对纤维增强复合材料的属性特点，应用坐标系转换原理推导出通孔法测量复合材料残余应力时的应力释放系数公式。
The present applied calculation method is very complicated and low calculating accuracy, and this method can not determine the drilling hole position.
目前实际中采用的计算方法很繁杂，计算精度低，而且不能给出最优的钻孔位置。
The undermine method of well drilling technology once of blasting is put forward as well as the calculation of blasting parameters and the demand of implementation for hole.
介绍了爆破一次成井技术在漂塘钨矿的应用实践，提出了爆破一次成井的掏槽方式，爆破参数的设计计算方法和炮孔的施工要求。
Based on the theory of elasticity and molar-Coulomb strength failure criterion, we proposed the prediction method for hole enlargement ratio in the condition of underbalanced drilling.
基于弹性力学理论及岩石摩尔-库仑强度破坏准则，提出了欠平衡钻井条件下井径扩大率的预测方法。
By applying apparatus for piezoelectric ceramic vibration drilling, the method of varying feed rates in vibration drilling is used to drill the micro-hole.
应用压电陶瓷振动台振动钻削装置，采用变进给量振动钻削法加工微小孔，并用工具显微镜对入钻定位误差和出口毛刺进行测量。
For eliminating the errors in deformation measuring and improving the accuracy in hole-drilling method, this paper presented an optical technique, grating rosette and moire interferometry.
针对钻孔法测量残余应力方法中变形测量存在的误差，提出用光栅应变花测量钻孔所释放的残余应变。
Strain gage hole drilling method is one of the most popular residual stress measurement methods.
应变片钻孔法是工程中应用最广的残余应力测量方法之一。
If the section is a circular arc in the spatial slanting plane, the circular arc is the extremely reasonable bore hole path curve for slide drilling in minimum curvature method.
在此方法中，假设井段是空间斜平面上的圆弧，对于滑动钻进方式，圆弧是非常合理的井眼轨迹曲线。
A method of ultrasonic vibration drilling is presented to the hole machining of metal matrix composites.
针对叠层复合材料的微小孔加工，提出了阶跃式多元变参数振动钻削新方法。
Theequation makes the measuring accuracy of residual stresses with hole-drilling method with cut-ting tools improved greatly.
本关系的获得使得采用刃具钻孔测量残余应力的精度有很大提高。
The main contents of this thesis are the research of simultaneous casing & coring method by pneumatic Down-the-Hole (DTH) hammer drilling and the innovation of a novel vegetable-gum drilling fluid.
本文是以中国水电顾问集团成都勘测设计研究院负责“架空层钻进取心技术研究”项目为依托，研究的主要内容是空气潜孔锤跟管取心钻进技术和新型植物胶冲洗液的开发研究。
The method of rotary drilling hole and protecting hole wall by static mud is an advanced technique to drill hole.
静态泥浆护壁旋挖成孔工艺是一项先进的成孔工艺。
Based on the analysis of requests to pulse generator of high speed small hole EDM drilling machine, a new combination pulse generator is developed in this paper with modular design method.
分析了高速电火花小孔加工对脉冲电源的要求，研制出一种新型脉冲电源——组合式高速电火花小孔加工脉冲电源。
Mechanical method is a category of measuring residual stress. In the category, hole-drilling method, ring-core method and dissecting method are commonly used.
机械法是测残余应力的一类方法，其中常用的有盲孔法、环芯法和剖分法。
Residual stress distribution of FSW has high gradient, which makes the conventional strain gauge hole drilling method unsuitable.
应变片钻孔法是工程中应用最广的残余应力测量方法之一。
The processing efficiency is low but the labor cost is high when the traditional method for drilling hole is used, also the processing precision is difficult to guarantee.
采用传统钻孔加工方法，加工效率很低，人工成本很高，且加工精度质量很难保证。
Tunnels in rock are all dug by the method by drilling a small hole, packing explosive and dynamiting.
在岩石层的隧道均采用钻眼、装药、爆破的方法开挖。
The initial residual stress of the polymer bonded explosive based on TATB and its distribution were tested by blind-hole drilling method.
为检查小湾水电站转轮焊接、退火效果，采用了盲孔法及压痕法对转轮退火前后的残余应力进行了测试。
This method takes the detritus returned from bottom hole as the studying object. The fractal mechanism and forming process of broken rock during drilling were studied.
对石油钻井过程中岩石破碎的分形机理及形成过程进行了研究，提出了一种以井底返出的岩屑为对象测试岩石可钻性的新方法。
This method takes the detritus returned from bottom hole as the studying object. The fractal mechanism and forming process of broken rock during drilling were studied.
对石油钻井过程中岩石破碎的分形机理及形成过程进行了研究，提出了一种以井底返出的岩屑为对象测试岩石可钻性的新方法。
应用推荐