Feedforward compensation based on the PID control algorithm.
基于前馈补偿的PID控制算法。
We compared the result of fuzzy–weighted control with the PID control.
对实验对象采用模糊加权控制与传统PID控制进行控制效果比较。
The PID control ioop is designed for single-channel control system of spinning warhead.
针对旋转弹头单通道控制提出了相应的PID控制。
The PID control signal was modulated by fuzzy control to improve the system performance.
该方法通过模糊控制调节PID控制器输出，从而改善系统性能。
By using PID control, through the iterative learning algorithm, the PID control simulation is realized by using SIMULINK.
采用PID控制，通过迭代学习算法，在SIMULINK下实现了PID控制仿真。
In the PID control algorithm, the parameter installation is extremely important, its quality direct influence control performance.
PID控制算法中，参数整定是十分重要的，其好坏直接影响控制性能。
This paper introduces the PID control over the dyeing process. A step wise control method of improving PID parameters is also stated.
分析了染色工艺过程的PID控制算法，提出一种分段改进PID参数的控制方法。
In this paper, the fuzzy control theory combined with the PID control theory is used to built a stepping motor position servo system.
本文采用模糊控制与常规pid控制相结合的方法，设计了步进电动机位置伺服系统。
The control system USES the PID control, it may voluntarily move according to the input craft when inputting the freezing and drying craft.
控制系统采用PID控制，冻干工艺输入后，可按输入工艺自行运行。
Based on the PID control theory and recent PID parameter tuning method, a tuning method using direct search optimization (LJ method) is designed.
本论文在PID控制理论及现有PID控制参数整定方法的基础上，设计使用随机数直接搜索法进行PID控制参数的寻优整定。
From the point of view of engineering application, the PID control rule is discussed and the experience of automatic control system is introduced.
从工程应用的角度，对PID控制规律应用注意事项进行了讨论，并介绍了一些控制系统投入自动的经验。
At the same time, the application of nuclear belt weigher in lapping machine is designed, and the PID control function can be achieved based on PLC control.
同时还说明了核子皮带秤在铺网机中的应用以及核子皮带秤在PLC中PID控制功能的实现。
In this hybrid control method, the fuzzy control is used for quickly adjusting the dynamic process and the PID control for accurately accommodating the static process.
在这种混合控制方法中，采用模糊控制实现动态过程的快速调节；采用PID控制实现稳态过程的精确调节。
With the same structure of the PID control system and the state variable feedback system, a new solution to tuning PID control parameters by pole placement is presented.
利用所提出的PID控制系统与状态反馈控制系统具有相同结构的特点，提出了利用状态反馈极点配置方法来整定PID参数的思路。
A cost function is used as the criterion of performance evaluation and simulation is made to analyze the effect of all sorts of network delays on the PID control performance.
使用一种代价函数作为性能评估标准，并通过仿真实验分析了各种网络延时对PID控制性能的影响。
The paper analyzes enthalpy value control technology based on the enthalpy wet chart's, the PID control principle and the working principle of central air condition in detail.
论文对基于焓湿图的焓值控制技术、PID控制规则以及中央空调工作原理进行了分析。
This paper introduces the working principle and controlling characteristic and studies the PID control models of the force and displacement of the rotary Stretch-bending former.
介绍了转台拉弯机的工作原理及控制特点，研究了其力和位移的PID控制模型。
An optimized algorithm combining the fuzzy control with the PID control has been put forward, realizing a good control of the temperature system in the high frequency heating equipment.
提出一种模糊控制与PID控制相结合的优化算法，实现了对高频加热设备温度系统的良好控制。
The study indicated the key of the hydraulic valve design and introduced the mathematical model of the control system and the PID control system of the single chip microcomputer control.
给出了液压阀的设计要点、控制系统的数学模型及采用单片机为核心的PID控制系统。
The simulation results showed that control effect of the controller was better than that of the conventional PID control arithmetic and the PID control arithmetic of fuzzy self adaptation.
仿真结果表明该控制器的控制效果优于传统的PID控制算法和模糊自适应PID控制算法。
To resolve the PID control problem of unknown systems, intelligent PID controller of zero-pole placement was designed according to PID control system theory and zero-pole placement theory.
以业扩报装流程为核心的流程化用电管理信息系统 ，是一个基于知识系统的智能型用电管理系统 ，它由数据库系统和知识库系统两部分组成 。
In view of the result of simulation, LQR regulation is excellent to the PID control system, LQR regulation accuse as velocity steady controlling in the pump-controlled motor system is better.
从仿真结果上看，LQR调节的性能优与PID控制，说明采用LQR调节器作为泵控马达恒速控制系统的控制方法是良好的。
This algorithm is with wider application range compared with the other self-tuning PID control algorithms.
该算法与其它自校正PID控制算法相比，具有适用范围更广的特点。
The system can use computer technology to implement PID control with good applicability and flexibility, which can adjust PID parameters according to the system performance command.
系统采用计算机技术实现PID控制，可以根据系统性能指标调整PID参数，具有良好的适用性和灵活性。
The experiment with PLC shows that the governor with Fuzzy-PID control has such advantages as wide adaptability and good reliability.
通过PLC实现，表明用模糊-PID控制理论构筑的调速器其有适用性广，可靠性高的优点。
The control system model consists of control strategy, sensors and actuators sub models. The control strategy is a PID controller.
控制系统模型包括控制策略、传感器和执行器模型，本文选用的控制策略为PID调节器。
Compared to the normal PID controller or the fuzzy controller, the finer control result was attained.
比常规的PID控制器或模糊控制器，可以达到更好的控制效果。
Compared to the normal PID controller or the fuzzy controller, the finer control result was attained.
比常规的PID控制器或模糊控制器，可以达到更好的控制效果。
应用推荐