The theoretical plate number "n" of distillation towers is an important data for distil - lation tower design.
化学工程中精馏塔的理论塔板数n是塔器设计的一个重要数据。
The theoretical plate number is 6 143. The content of senegenin in Radix Polygalae from six districts of Shanxi province was measured with the above method.
理论塔板数为6 143。测定了我国远志主产区山西6个产地的远志中远志皂苷元的含量。
Theoretical analysis and numerical computation for dynamic characteristic of the sandwich plate with constrained damp layer are presented in this paper.
本文对粘弹性约束阻尼夹层板的动态特性进行了理论分析和数值计算。
These provide theoretical calculation basis for analysis of high mode flexural vibration of plate and design of big round plate and multi nodal compound flexural ultrasonic transducer.
对薄板的高次弯曲振动模式的分析及大圆盘、多波节复合弯曲超声换能器的设计提供了理论计算依据。
It is conducted a theoretical analysis of improving the residual fatigue life of a steel plate with central fatigue damage cracks, which is strengthened by CFRP.
对含中央疲劳损伤裂纹钢板粘贴CFRP加固，改善其剩余疲劳寿命进行了理论分析。
The abrasion state of LP drainage pumps balancing plate are expounded, and analysis in theory under the equipment status, so as to get theoretical causes of abrasion.
阐述了低压加热器疏水泵平衡盘磨损的问题，在设备现状基础上进行了理论分析，得出了平衡盘磨损的理论依据。
The abrasion state of LP drainage pump's balancing plate are expounded, and analysis in theory under the equipment status, so as to get theoretical causes of abrasion.
阐述了低压加热器疏水泵平衡盘磨损的问题，在设备现状基础上进行了理论分析，得出了平衡盘磨损的理论依据。
The results obtained provide a theoretical basis for the development and application of strengthening the heat transfer of granular media flowing in the corrugated plate heat exchanger.
这些研究结果为粉粒体波面板换热器强化传热的研究与开发提供了理论基础。
In this paper, a theoretical analysis for the local buckling of the flange plate of the partially encased concrete columns subjected to H-shape steel axis force was presented.
对部分包裹混凝土的H型钢轴压柱翼缘板的局部屈曲性能进行了理论分析。
Calculation on plate and stiffened plate by using added mass method has great theoretical significance and practical value.
船体结构是由板和梁组合而成的，因此计算板和加筋板的附加水质量具有重要的理论意义和实用价值。
Theoretical analysis and tests have shown that the prospects for the engineering application of the plate thickener are bright, and it can counteract the weaknesses of the "gravity sett..."
通过理论分析和试验表明，板片式增稠器的工程应用前景乐观，可以弥补“重力沉降”和“离心分离、絮凝沉降”技术的不足。
As a theoretical basis of this article, the theory of plate design for chemical classroom teaching provides avenues for in-depth study of the various phenomena of classroom teaching.
化学教学板块设计理论为深层次研究课堂教学的种种现象提供了途径，是本文的理论基础。
By theoretical design and CAD, a kind of wide frequency-width Radar Absorbent Structure Plate named "trap" and a kind of wide frequency-width Radar Absorbent Honeycomb Sandwich Material are obtained.
通过理论设计及CAD辅助计算得到了一种“陷阱”式的宽频带层板型结构吸波材料和一种宽频带蜂窝夹层型结构吸波材料。
The theoretical stress releasing period of crust and mantle in India and Burma plate is calculated by viscoelastic model. It is about 56a and close to the strong earthquake activity period.
利用粘滞模型计算了印缅板块地区壳幔的理论应力释放周期为56年，与该地区的强震活动周期基本吻合。
This research provides a theoretical method for design of a full column bolt with bottom plate.
此研究为带垫板全长锚杆支护设计提供一个理论计算方法。
These theoretical results offer a good reference value for design combination wave-plate depolarization.
这些理论结果对复合波片退偏器的设计具有好的参考价值。
The refraction index of transparent glass-plate was measured with ray-displacement method, formulas of the refraction index and experimental error were obtained by theoretical analysis.
采用光束位移法测量了透明玻璃板的折射率，分析了折射率的公式和实验误差处理公式。
Theoretical and experimental results of performance studies of flat plate solar collector with V-corrugated transparent insulator are presented in this paper.
本文报道了V形隔热膜平板集热器性能的理论与实验研究结果。
Obtained the guide rail plate aperture bevel edge and the travel angular speed theoretical curve;
得到了导轨盘开口倒角和行驶角速度的理论曲线；
In the study of clamp-plate connection, theoretical analysis has been done to analyze the effects of the friction coefficient between the membrane and clamp plate.
针对其中螺栓夹板连接进行了有限元建模，分析了摩擦系数对于螺栓夹板连接受力性能的影响。
The general UBET is applied to analyze deformation of sintered steel ring is smooth plate upsetting, and theoretical calculations are compared to experimental results.
用广义ubet方法分析了烧结钢圆环光滑平板镦粗变形，并作了实验验证。
Therefore the theories such as patch test and FE convergence etc. can be moved to plate bending, thus both sides will be on the same theoretical level.
从而其分片试验、收敛性等性质也同时移植到板弯曲元，使两者处于同一水平上。
This paper deals with theoretical and numerical analyses of scattering of elastic wave and dynamic stress concentrations in an infinite thin plate with a circular hole using boundary element method.
本文采用边界元法对开孔无限大薄板弹性波的散射与动应力集中问题进行理论分析和数值计算。
This paper deals with theoretical and numerical analyses of scattering of elastic wave and dynamic stress concentrations in an infinite thin plate with a circular hole using boundary element method.
本文采用边界元法对开孔无限大薄板弹性波的散射与动应力集中问题进行理论分析和数值计算。
应用推荐