The process for preparing TC4 thick-wall tube by radial forging was studied.
研究了用径向锻造方法制备TC4厚壁管材的生产工艺。
The induction heating equipment and heat treatment process of thick-wall pipe were reconstructed.
对厚壁管感应加热设备及热处理工艺进行了重新设计改造。
So the compound or wire-wounded pressure vessels are often adopted to assure the fail safe of thick-wall vessels.
因此常采用复合式或绕丝式的容器，使厚壁容器具有安全失效的性能。
Stands are constructed of durable thick-wall, polyethylene plastic with a structurally reinforced post and fillable base for maximum stability.
架子设计为厚壁的，聚乙烯类塑料材质的加筋立柱，和保持最大稳定性的地板。
Influence of the workpieces pre-hole diameters and passes on thick-wall cylinders hole flanging is investigated by experiment and numerical simulation.
采用实验研究和数值模拟的方法，分析了工件预加工孔径和孔型参数对厚壁筒体翻孔工艺的影响。
The present paper discussed the problems during the production of thick-wall glass by application of new technology of inside diameter controlling with vacuum method.
本文对真空法控制内径拉制成厚壁管状玻璃棒的生产中出现的问题进行讨论。
The bending technology of the thick-wall supprt of aluminum alloy was analyzed, and the flattening length of bending, blanking force, piercing force and bending force were calculated.
分析了铝合金厚壁支座的弯曲工艺，计算了弯曲件的展开长度、落料力、冲孔力及弯曲力，阐述了弯曲件的回弹因素及凸凹模之间的间隙，介绍铝合金厚壁支座弯曲模具的结构设计。
"It is a very thick wall," she acknowledged as she inspected it, hammer and chisel in hand.
“这是一堵非常厚实的墙”，手中拿着锤头和凿子，她承认道。
It has been suggested that there are enough blocks in the three pyramids to build a 3 m (10 ft) high, 0.3 m (1 ft) thick wall around France.
有人说这3座金字塔的所有石块足以围绕整个法国建造一面高3米(10英尺)，厚0.3(1英尺)米的石墙。
The blind facade, the protective thick wall, and the slight crevices, all these above reinforce the architectural theme.
表层是百叶窗、起保护作用的厚壁和微裂缝，这些都能突出建筑主题。
During the rainy season-mid-november through late april-the falls virtually disappear behind a thick wall of mist; at other times, the water volume noticeably eases.
在雨季- 11月中旬到4月下旬-瀑布几乎消失在厚厚的雾墙之后，而在其他时间，水量则明显缓和。
The result indicates that the maximum of dynamical stress intensity factor arrives behind the load time and increases with the size of thick wall cylinder.
结果表明动态应力强度因子的最大值在加载时间上有滞后性现象，它的最大值随厚壁筒尺寸增加而增加。
We study stress intensity factor of thick wall cylinder with cracks under dynamic load.
研究了动载荷作用下带裂纹厚壁筒的应力强度因子。
This welding process, with continuous welding wire feeding, fast deposit speed and quality welding pass, is especially suitable for long distance pipeline with large diameter and thick wall.
全位置自动焊接技术的特点是，焊丝可以连续送进，焊丝熔敷速度快，焊接质量较高，尤其适用于大口径、厚壁管的焊接。
Guarantee special thick wall casing to put down successfully and improve reaming after drilling technology to seal quality of salt layer.
保证特厚壁套管顺利下入和提高盐膏层封固质量的钻后扩眼技术。
The paper introduced pipe internal welding machine's composition, necessary equipment and unique advantage in large diameter thick wall pipe construction.
介绍管道内焊机的结构、配套设备及在大口径厚壁管道施工中的独到优点。
The assembling stress appears in combined thick wall cylinder because of assemblage excess.
由于过盈配合组合厚壁筒内会产生装配应力。
Our company specialize in various specifications of the stainless steel tube, stainless steel square tubes, stainless steel seamless tube, stainless steel mirror tube, capillary, thick wall pipe!
专业供应各种规格的不锈钢管，不锈钢方管，不锈钢无缝管，不锈钢镜面管，毛细管，厚壁管！
The heat transfer enhancement and pressure drop of spiral tube with oval cross section and thick wall were investigated.
对椭圆断面厚壁螺旋管进行了强化传热和流体阻力实验研究。
Based on the heat conduction theory of thick wall cylinder, the distribution of temperature field in rocks acted by high energy burners was calculated.
以厚壁筒的热传导为模型，研究了高能燃烧剂作用下岩石介质中温度场分布。
The injection molding period for the thick wall forming may be reduced by over 60%, improving plastics fluidity and filling effect.
使厚壁成型注塑周期可降低60%以上，增强塑料的流动性及填充效果。
The injection molding period f the thick wall fming may be reduced by over 60%, improving plastics' fluidity filling effect.
使厚壁成型注塑周期可降低60%以上，增强塑料的流动性及填充效果。
Based on these equations, continuous induction heat treatment of the thick wall tube, including heating, quenching and tempering, is simulated by finite element method on ANSYS software.
基于这些方程在ANSYS软件上实现了对厚壁筒形工件连续感应热处理的计算机模拟计算。
This paper introduced the method and result of conducting a finite element analysis on the cold forged reinforced thick wall tee joint.
本文介绍了对冷锻厚壁加强三通进行有限元分析的方法和结果。
This paper analyses the factors that affect the welded thick- wall steel tubes with middle or small diameters, and provides with corresponding solutions.
分析了影响中小直径厚壁电焊钢管质量的因素，并提出了相应的解决措施。
Old city gate the gate of old village is made of flashed brick and red sand stone with high and thick wall which surrounds the village.
《老城门洞》古村堡门由青砖、红砂石砌成，墙高门厚，将整个村子包围得严严实实。
And the design can ensure the stability of diameter and roundness when producing the pipe with thick wall.
特殊设计可以拥有稳定的直径尺寸和圆整度，可以适合生产厚壁管的需要。
The new process technology and technical requirement of large diameter thick wall steel tube for super tall building are discussed.
阐述了超高层建筑大直径厚壁钢管的加工新工艺、新技术要求；提出防止焊接裂纹及振动时效消除焊接应力的措施。
Results 12 cases of pulmonary mycosis showed consolidation in the segment or lobe of the lung (6 cases), cavity with thick wall (2 cases), nodule or mass (2 cases), and fungal ball (2 cases).
结果12例肺真菌病影像表现为肺段或叶的实变6例，厚壁空洞2例，结节或肿块2例，霉菌球2例。
Results 12 cases of pulmonary mycosis showed consolidation in the segment or lobe of the lung (6 cases), cavity with thick wall (2 cases), nodule or mass (2 cases), and fungal ball (2 cases).
结果12例肺真菌病影像表现为肺段或叶的实变6例，厚壁空洞2例，结节或肿块2例，霉菌球2例。
应用推荐