Abstract: : TBM(Tunnel Boring Machine) Cutting Tools Configuration is one of the most important factor during TBM cutting tool design.
摘罗要：盾构机刀具配置是盾构机刀具设计中是非常重要的内容。
An example of gear cutting machine tool improvement design was also given to explain the process of evaluation in details.
以某大型内齿轮铣齿机的床身改进设计为例，对方案的评价及优选过程进行了详细的说明。
According to modularization design principle, the modules of multi-spindle box of modular machine tool are divided on the basis of function analysis.
根据模块化设计原理，在功能分析的基础上划分了组合机床多轴箱的各级模块。
Then give the First Machine Tool Factory of QingHai a whole design of DNC system structure.
然后针对青海第一机床厂进行了系统的结构和控制总体设计。
This article mainly introduces the design thought of PLC applying for Tang Xi Modular Machine Tool electronic control system.
本文对可编程序控制器应用于镗铣组合机床电气控制系统的设计思想作了介绍。
The connotation and characteristic of constraint in collaborative design of machine tool are analyzed. Conformation model of constraint network is demonstrated using EXPRESS-G.
分析了机床产品协同设计中约束的内涵和特点，并用EXPRESS - G图描绘了约束网络的结构模型。
Design steps and main points of metal cutting machine tool are introduced and elaborates the importance of machine tool base design.
介绍了金属切削机床基础设计的步骤和要点，并阐述了基础设计的重要性。
The work principle and design method for flexible work tank elevator of EDM machine tool are briefly introduced.
简介了电火花成形机工作油槽柔性升降系统的工作原理及设计方法。
Sets up a new whole machine model using column optimized results and re-analyses it to confirm that the dynamic optimum design of machine tool column improves the whole machine performance.
利用得到的立柱优化方案建立新的整机模型，并进行重新分析以验证立柱的动态优化设计对整机性能的提高。
The dynamic characteristics of the spindle-bearing system are important criteria in the optimum design of machine tool spindle.
主轴-轴承系统的动态特性是机床主轴部件优化设计的重要指标。
Argument the drying cutting mainly difficulty, the design specification to dry cutting machine tool, and the back method of machine tool realizes drying cutting.
着重讨论了实现干切削的主要难点、干切削技术对机床的设计要求，以及机床实现干切削的辅助方法。
Processing parts on a numerical controlled machine tool, the first problem is the technological design of the part.
在数控机床上加工零件，首先遇到的问题就是零件的工艺处理。
The article introduces structure and design of parallel connected machine tool single spur track, and calculation of ballscrew.
介绍并联机床单支路的结构与设计，并对滚珠丝杠进行计算。
Based on the characteristics of the design of machine tool, the modular designing technology is applied to CAD system for modular machine tool.
根据组合机床设计特点，将模块化设计技术应用于组合机床CAD系统。
This paper introduced basic requirements of main driving system in modern NC machine tool. Design and feature are also described.
介绍了现代数控机床主传动系统设计的基本要求，主传动系统设计及特点。
This article introduces the design and realization of the control system for electrical spark linear incising machine tool.
本文介绍了电火花线切割机床的微机控制系统的设计与实现；
This paper also introduces the design methods of fact base, rule base and reasoning machine design method of NC tool selection system, and establishes NC tool selection model based on expert system.
论文还详细介绍了数控刀具事实库、规则库以及数控刀具选配系统推理机的设计方法，并建立了基于专家系统的数控刀具选配系统模型。
In this paper, taking 6-sps parallel machine tool as an example, design for the construction dimension of 6-sps parallel machine with given workspace is studied.
以6 -SPS并联机床为例，对给定工作空间的并联六杆机床结构尺寸设计进行了分析与研究。
The control unit interface of nc machine tool is an important part for man-machine conversation whose design quality directly effects the study and working efficiency of users.
数控机床控制单元界面是人机交互的主要部位，其设计质量直接影响用户的学习和使用效率。
The character of the gear for machine tool, heat treatment and principle for structure design are introduced.
介绍了机床齿轮的特点、热处理特点及结构设计原则。
By applying finite element method and optimal design theory this paper carried out an optimal design model of the machine tool shaft, chosen optimal methods and given a living example.
运用有限元法和优化设计理论，建立机床主轴结构设计的优化数学模型，选择优化方法，进行了实例计算。
This paper introduces the design method of redoing ordinary lathe to special machine tool for manufacture planar second-enveloping worm wheel in details.
较详细地介绍了用普通车床改装成加工平面二包蜗轮副专用机床的设计方法。
The experimental results provide a scientific basis for the dynamic design of high speed and extra-high speed machine tool with the bearing spindle units.
研究结果为采用陶瓷轴承主轴单元的高速和超高速数控机床的动态设计提供了实验依据。
This paper proposed one kind of CNC machine tool design proposal which is suitable precisely cuts.
本文提出了一种适用精密切割的数控车床设计方案。
The concrete flow of conflict negotiation is established. Finally, an example of collaborative design of a machine tool spindle is used to show the validity of this arithmetic.
在此基础上建立了具体的冲突协商流程，通过某机床主轴的协同设计实例说明该方法的有效性。
The design content involves the mechanical manufacturing process and machine tool fixture design, metal cutting machine tools, tolerance and measurement and other aspects of knowledge.
本次设计内容涉及了机械制造工艺及机床夹具设计、金属切削机床、公差配合与测量等多方面的知识。
According to dynamic analysis and optimal design of machine tool structure, digital analysis and optimal design of some model of precision horizontal MC was developed.
针对机床产品结构动力学分析与优化设计的需要，进行了某型号精密卧式加工中心数字化性能与优化设计的分析计算。
According to modularization design theory, the modules of aggregate machine tool are divided in this paper on the basis of function analysis.
根据模块化设计原理，在功能分析的基础上划分组合机床的各级模块。
According to modularization design theory, the modules of aggregate machine tool are divided in this paper on the basis of function analysis.
根据模块化设计原理，在功能分析的基础上划分组合机床的各级模块。
应用推荐