The key parts of twin screw kneader are a couple of intermeshing screws, just like the heart of the screw kneader.
双螺杆捏合机最核心的部件是一对相互啮合的螺杆,就如同双螺杆捏合机的心脏一样。
The twin screw reactive extrusion process for nylon 6 inland was introduced.
介绍了国内尼龙6的双螺杆反应挤出工艺。
A series silane grafted polyethylenes were prepared by using the twin screw extruder.
以双螺杆挤出机为反应器,制备了一系列硅烷接枝聚乙烯。
There are several flow patterns at melting section in co-rotating twin screw extrusion.
提出同向双螺杆挤出的熔融过程中物料运动具有多种形式的观点。
The classification of twin screw extruders and their performance and application were introduced in this paper.
本文介绍了双螺杆挤出机的分类、性能及应用。
The relation between the output of twin screw pulping machine and the geometric parameter of the screw has been studied.
对双螺杆磨浆机产量与螺杆几何参数之间的关系进行了研究。
The sealing principle of sealing cavity in single thread twin screw pump is the same as that in double thread twin screw pump.
单头双螺杆泵与双头双螺杆泵密封腔的密封原理相同。
Based on experimental phenomena, a new melting concept in twin screw extrusion, sea island melting model is concluded and defined.
以实验现象为基础,提出了双螺杆挤出过程中海-岛式熔融模型的概念。
Metrical experimental studies on screw torque, axial thrust, barrel inwall pressure of twin screw pulping extruder (TSPE) were done.
对双螺杆磨浆机的螺杆扭矩、轴向推力和机筒压力进行了测量实验研究。
The research results put forward the theoretical instruction of the design of twin screw reactor and the process of polymer extrusion.
研究结果对双螺杆反应器的优化设计和聚合物挤出加工有一定的理论指导意义。
The cooking extrusion conditions and formula of corn snack produced by BC45 co rotating twin screw extruder were discussed in this paper.
研究了采用BC45型双螺杆挤压机加工玉米食品的工艺和配方。
Using the datum curves from the twin screw extrusion experiment, the correlative factors influencing the fill ratio of screw are analysed.
利用双螺杆挤出实验中的实验数据曲线,对影响螺杆填充率的诸相关因素进行分析。
Extrusion rate, melt pressure, flow profile and mixing effects of the conical twin screw with mixing elements were observed experimentally.
对混炼型锥形双螺杆的挤出产量、物料压力、物料流动状态及混合效果进行了大量实验研究。
The functions of the calculation software for a corotating twin screw geometry design are introduced by means of showing a calculation example.
通过算例介绍了同向双螺杆几何设计计算软件的功能。
This thesis concentrates on simulation of Non-Newtonian isothermal flow in kneading block in closely intermeshing co-rotating twin screw extruders.
本文主要就全啮合同向双螺杆挤出机捏合块流道中熔体全充满区的流动进行了全三维非牛顿等温模拟。
The paper focuses on the study of dynamics parameters that include flow rate, power consumption, torque and axis force of twin screw pulping extruder.
本文主要对双螺杆磨浆机的动力学参数(流率、功耗、螺杆扭矩和轴向力)进行了研究。
The paper plays an important role in the design of the whole system of twin screw grinder and is a reference on design and study of the congener mechanics.
本文的研究工作对双螺杆磨浆机的整机设计具有重要的指导意义,对同类产品的设计和研究也有一定的借鉴作用。
Three-dimensional flow simulation of mixing zones in a new conical twin screw extruder with mixing blocks is performed with a finite element package, ANSYS.
利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
The paper plays an important role in the design of the driving system of twin screw grinder and is a reference on design and study of the congener mechanics.
本文的研究工作对双螺杆磨浆机传动系统的设计具有重要的指导意义,对同类产品的设计和研究也有一定的借鉴作用。
It is obviously that only taking account of melt handling without considering material melting is not suitable to study twin screw extrusion theory thoroughly.
显而易见,只讨论熔体输送而不讨论物料熔融,对全面研究双螺杆挤出理论是很不够的。
By extruding several type starch materials on single screw extruder and twin screw extruder, the relationship of extrudate, process condition and equipment are observed.
在单、双螺杆挤出机上进行了多种淀粉原料的挤压实验,研究了原料含水率、挤压操作参数、设备结构对挤出过程和挤压产品的影响。
The preparation process of maleic anhydride grafted polypropylene (PPg-MAH) was studied by reactive extrusion using a twin screw extruder system and infrared spectroscopy.
利用反应挤出技术和红外光谱分析方法,对马来酸酐(MAH)接枝聚丙烯(PP)的制备工艺进行了研究。
The axial force and power consumption are important factors of affecting reliability of twin screw pulping extruder, at present there are no theory calculation methods about them.
轴向推力和功耗是影响双螺杆磨浆机可靠性的重要因素,目前尚无理论计算方法。
The approximate analytical solution of the velocity distribution in the side gap of the counter-rotating twin screw extruder is obtained by means of the generalized Newtonian viscosity.
采用广义牛顿粘度公式,得到了振动力场作用下的异向双螺杆挤出机螺棱侧间隙内的速度分布近似解析解。
Three-dimensional flow simulations of the flight element in an intermeshing co-rotating twin screw extruder are performed by solving the Navier Stokes equations with a finite element package, ANSYS.
利用A NSYS有限元分析软件对啮合同向双螺杆挤出机的螺纹元件流场进行了三维等温非牛顿模拟分析。
Analyzed the reasons for the rising of primary exit temperature of twin screw compressor, put forward corresponding solutions, which were proven to be effective by equipment repair and commissioning.
针对双螺杆压缩机一级出口温度逐渐升高的原因进行分析,提出相应的解决措施,并通过设备检修试车进行了进一步论证。
Twin screw extruder is one of the important equipment in biodegradable starch plastic processing.
双螺杆挤出机是目前生物降解淀粉塑料加工生产中的重要设备之一。
Twin screw extrusion technology of porous ultra high burning rate propellant (UHBRP) substitutes was studied.
研究了多孔超高燃速推进剂代料的双螺杆混合挤出工艺。
The effects of screw speed, salt (0 ~ 3%) and sugar (0 ~ 8%) contents on the extrusion of rice flour using a corotating, fully intermeshing twin-screw extruder were studied.
研究了在使用旋转型全隔行式双螺杆挤压机时,螺杆速度、盐(0 ~ 3%)和糖(0 ~ 8%)对米粉挤压的影响。
The effects of screw speed, salt (0 ~ 3%) and sugar (0 ~ 8%) contents on the extrusion of rice flour using a corotating, fully intermeshing twin-screw extruder were studied.
研究了在使用旋转型全隔行式双螺杆挤压机时,螺杆速度、盐(0 ~ 3%)和糖(0 ~ 8%)对米粉挤压的影响。
应用推荐