The factors influencing the wear resistance of UV coating were discussed.
讨论了影响紫外光固化涂料耐磨性的几个因素。
The tread formula of TBR tire was modified to improve the wear resistance.
对载重子午线轮胎胎面胶配方进行改进，以提高耐磨性能。
It includes reliability design of wear resistance, stability, static stiffness and strength.
它包括耐磨性、稳定性、刚度、强度的可靠性设计。
The laser hardening material can effectively improve the surface hardness and wear resistance.
认为激光硬化处理能够有效地改善材料的表面硬度和耐磨性。
It means that nickel-coated graphite layer can greatly improve wear resistance of titanium alloy.
说明镍包石墨涂层可以大大提高钛合金的表面耐磨性能。
The results showed that the hardening layer has better hardness gradient and high wear resistance.
结果表明，表面熔化处理后的硬化层的硬度梯度平缓，耐磨性高。
Low out particle greases, however, have problems with endurance wear resistance, noise, torque, etc.
但低飞溅性的润滑油脂可能带来耐磨性、噪声、阻力矩等问题。
The experimental results show that, the composite coatings have higher hardness and wear resistance.
实验结果表明，复合镀层具有较高的硬度和耐磨性。
The user can input, store, inquire and print the data of abrasive wear resistance materials by AWRMDS.
通过AWRMDS，用户可以输入、存储、查询和打印耐磨料磨损材料数据。
For carbide glass ceramics stone precious stones and other heavy-load cutting grinding wear resistance.
用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。
The results show, surface treated by laser hardening can improve the surface hardness and wear resistance.
结果表明，激光硬化处理的表面能够有效地改善材料表面硬度和耐磨性。
For carbide, glass, ceramics, stone, precious stones and other heavy-load cutting, grinding wear resistance.
用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。
EHC Global polyurethane rollers offer greater resiliency and wear resistance than plastic or rubber rollers.
依合斯提供的聚氨酯滚轮比起塑料和橡胶滚轮更具弹性和耐磨性。
They have moderate wear resistance to impact and it is a good carbide grade for universal applications. They.
耐磨性和抗冲击性能适中，通用性较好，用于精轧机组后部大部分机架或全部机架的线材轧制。
Tungsten can improve the hardness and thermal strength of steel, and can improve the wear resistance of steel.
钨能进步钢的红硬性和热强性，并能进步钢的耐磨性。
And also the coating with good performance of wear resistance, anticorrosion and weather resistance was found.
同时这种瓷质彩色膜层还具有良好的耐磨、耐腐蚀和耐候性能。
The corrosion wear resistance of low chromium white cast iron increases when the silicon content increases in it.
而增加含硅量后的低铬白口铸铁的腐蚀磨损耐磨性将比普通白口铸铁的高。
Steel tooth bit can increase the bit's stability and lower the tooth impact load, and enhance its wear resistance.
钢齿牙轮钻头增强了工作的平稳性，降低了牙齿的冲击载荷，使牙轮钻头的耐磨性能得到提高；
The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.
切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
Application of argon arc local strengthen can increase hardness and high-temperature wear resistance of the ring groove.
采用氩弧局部强化可提高环槽的硬度和高温耐磨性。
Different according to the medium, its temperature, corrosion and wear resistance are also different levels of requirements.
根据输送介质的不同，对其耐温、耐腐蚀和耐磨性能也有不同程度的要求。
Curing with peroxide alone, however, is inferior to sulfur vulcanization in areas such as wear resistance and dynamic properties.
但是，与硫黄硫化相比，单用过氧化物硫化胶料的耐磨性能和动态性能等比较差。
The effects of the size, distribution and content of graphite particle upon mechanical properties and wear resistance are studied.
研究了石墨粒子的大小、分布、含量对机械性能及耐磨性的影响。
Said really high environmental protection water soluble paint, but its wear resistance, anti pollution performance of relatively weak.
表示，水溶性漆的环保性确实很高，但其耐磨性、抗污性能相对较弱。
For concrete ground, it can save the cement consumption, and no purifying is needed, which increases the strength and wear resistance.
硬化混凝土地坪中，节约水泥用量，施工中不提浆，增加强度和耐磨耐久性作用。
High carbon steels are the most hardenable type of carbon steel and are used frequently for parts where wear resistance is an important factor.
高碳钢是最能被硬化的一种碳钢，常常用于高耐磨性很重要的地方。
The character of the brand are: no asbestos, low noise, wear resistance, not to hurt the disk, less dust, the original quality safety guarantee.
其品牌特色是：无石棉，低噪音，耐磨损，不伤盘，少灰尘，原厂品质安全保证。
The composite material has resulted in greater load carrying capacity, a reduced thermal expansion, greater wear resistance and fatigue endurance.
合成材料具有更好的承载能力，更低的热膨胀系数，更好的耐磨性和更好的抗疲劳性能。
The composite material has resulted in greater load carrying capacity, a reduced thermal expansion, greater wear resistance and fatigue endurance.
合成材料具有更好的承载能力，更低的热膨胀系数，更好的耐磨性和更好的抗疲劳性能。
应用推荐