The process flow of production for zinc plating on hinge was introduced.
介绍了铰链镀锌生产的工艺流程。
Electrochemical characteristics of the zinc plating solution are also studied.
同时研究了镀锌液的电化学特性。
The process flows and formula of new system of non-cyanide alkaline zinc plating were introduced.
介绍了新型无氰碱性镀锌体系的工艺流程和工艺配方。
Rotating disk electrode system is used to study the coating roughness in high-speed zinc plating.
将旋转圆盘电极体系应用于高速镀锌层粗糙度的研究。
Characteristics of BH-332 low Cyanide zinc plating process and maintenance of the bath are described.
着重介绍BH—332低氰镀锌工艺的特点和镀液的维护。
Carrier of brightener ACTS as fining the crystal size, making main brightener more soluble in chloride zinc plating.
载体光亮剂在氯化物镀锌中起着细化晶粒和增加主光亮剂溶解度的作用。
The application of cyanide-free zinc plating processes to large-sized and shape-complicated workpiece was introduced.
介绍了无氰镀锌工艺在大尺寸、形状复杂的工件上的应用。
The influences of grain diameter, grain shape and zinc content of zinc powder on mechanical zinc plating were analyzed.
分析了锌粉的粒径、颗粒形状、金属锌含量对机械镀锌层的影响。
New development of brighteners for alkaline zinc plating is reviewed with stresses on the advances in structure of monomers.
论述了现代碱性光亮镀锌添加剂单体结构的新进展及对锌电沉积过程的作用机理。
The process of surface treatment of cast iron hardware and the process flows of its mechanical zinc plating were introduced.
介绍了铸铁五金件的表面处理工艺及其机械镀锌工艺流程。
The apparatus is made of zinc plating iron plate, and composed of the respiratory chamber, the water conducting tube and the handle.
该呼吸器用镀锌薄铁制成，由呼吸室、导水管、手柄等部分组成。
Hiro plating Ltd. is a research and development enterprise with advanced technique in the field of zinc plating of automobile parts.
日本广镀金工业所是在汽车部件的电镀锌加工方面具有雄厚实力的研究开发型企业。
Influencing factors to the uniformity of coating thickness for alkaline zinc plating have been studied systematically by Hall-cell test.
采用霍尔槽试验对碱性镀锌镀层厚度均一性的影响因素进行了研究。
The applicable fields of alkaline cyanide-free zinc plating and acidic zinc plating before trivalent chromium passivation were proposed.
提出应用于三价铬钝化前的碱性无氰镀锌及酸性镀锌的适用场合。
The zinc plating could be used as bottom of chemical nickel plating and could deposit other protecting decorating metal coating layer on it.
所得锌镀层可 以作为化学镀镍的底层，也可以在其上沉积其它防护装饰性金属镀层。
Concentration of boric acid in bright sulfate zinc plating bath was determined referring to the same method for chloride type zinc plating bath.
将氯化物镀锌液中硼酸的测定方法用于测量光亮硫酸盐镀锌液中硼酸的含量。
Following the alkaline zinc plating process, the trivalent chromium passivation process is conducted to provide a protection layer for zinc coating.
碱性溶液所获得的镀锌镀层，采用三价铬溶液钝化。
The structure of zinc deposits gained from the new system and the traditional system of alkaline zinc plating were determined by X-ray diffraction respectively.
通过X -射线衍射实验对从该体系和从传统的碱性镀锌体系中获得的锌镀层的结构分别进行了测试。
This paper summarized the merits and demerits of KCl zinc plating, and advanced some views on controls of main compositions, technical conditions and additives etc.
本文概述氯化钾镀锌的优缺点，对主成分的控制、工艺条件的控制、添加剂的控制等都提出了十分中肯的看法。
Conventional alkaline cyanide zinc plating process was compulsively restricted for its emission of toxic and hurtful substances and harm to the environment and human being.
原有的碱性氰化物镀锌工艺存在有毒有害物质排放及对人体的伤害，被国家强制限制。
The existing methods of zinc plating blackening by black passivating, coloring, dyeing, etc. are studied, and the high resistance to corrosion of the passivator is highlighted.
综述了镀锌层黑钝化、着色、染色等黑化处理的方法，重点研究了高抗蚀的黑钝化处理。
Application and selection of brightening agent, additive, matters needing attention, common trouble removal and so on in zinc plating of chloride compound process are detailed.
详细阐述了氯化物镀锌工艺中光亮剂的使用、选择、添加量、使用注意事项及常见故障排除等。
Taking magnesium alloy AZ91D as an investigation sample, the pretreatment process for electroplating of highly pure magnesium alloy is investigated by means of basic zinc plating processing.
用AZ 91 D镁合金制样，研究了采用碱性镀锌工艺对高纯镁合金进行电镀的预处理工艺性能。
Results showed that the coating problem of hot-dip zinc plating workpiece was improved evidently by using the degassing agents MPP230 and MPP620 containing a primary component of polyethylene wax.
结果发现，主要成分为聚乙烯蜡的脱气剂MPP230与MPP620可以明显改善热浸镀锌件涂装存在的问题。
The production process of continuous zinc electroplating for steel wire was composed of wire drawing, heat treatment, pretreatment, zinc plating aid post-treatment as well as wastewater treatment.
铁丝连续镀锌的生产过程由拉丝、热处理、前处理、镀锌、后处理和废水处理所组成。
Non-chrome passivation; Silicate; Zinc plating; Corrosion resistance;
无铬钝化；硅酸盐；镀锌； 耐蚀性；
Zinc plating chromic acid salt after the passivation, corrosion resistance can improve 6 to 8 times.
锌镀层经铬酸盐钝化之后，耐蚀性可提高6 ~8倍。
In this paper, the author discusses the technical method of winding the zinc-plating steel strip in constant speed controlled by computer.
提出了采用计算机控制实现镀锌钢带以恒定速度卷绕的技术方法。
In this paper, the author discusses the technical method of winding the zinc-plating steel strip in constant speed controlled by computer.
提出了采用计算机控制实现镀锌钢带以恒定速度卷绕的技术方法。
应用推荐