安装：只需固定在房屋的螺栓螺母。
安装上体，用断开法兰和螺栓螺母固定。
本厂是一家各类标准件及客户要求之非标准螺栓螺母等的生产企业。
Our factory is a manufacturer of all kinds of standard fasteners and customized non-standard bolts and nuts.
安装新埋管，把新卡环和新法兰套进新埋管里，用螺栓螺母与法兰固定。
Install new lower barrel, place new snap ring and new flange on the new lower barrel, fixed by bolt nut.
以德国精湛、先进的制造工艺和技术为依托，专注于大型螺栓螺母紧固、拆装科技及液压实用动力的运用。
Germany skilled, advanced manufacturing processes and technologies, focus on the large nut fastening bolt, disassembly of hydraulic technology and practical application of driving force.
这些螺母和螺栓把轮子固定住了。
您是否曾经用过锤子和螺丝刀从螺栓上拧下螺母？
Have you ever used a hammer and screwdriver to loosen a nut from a bolt?
中国是世界上最大的螺丝钉、螺母、螺栓和垫圈生产商，而欧盟是这些商品的最大市场。
China is the world's biggest producer of screws, nuts, bolts and washers, while the EU is its biggest market.
否则，您可能感觉到像用锤子一样使用一个套筒扳手来敲击螺丝刀手柄而拧开螺栓的螺母。
Otherwise, you might feel as if you are using a socket wrench as a hammer hitting the handle of a screw driver to loosen a nut and bolt.
该模型是准确的螺母和螺栓，并已建成具有很大的精度，使用制造商的蓝图，大量的时间已花费确保这一皮肤是典型的。
The model is accurate to nuts and bolts and has been built with great precision using the manufacturers blueprints, a lot of time has been spent ensuring this skin is prototypical.
弯头应该用螺栓固定在湿井地面，并且设计成具有不需要任何螺栓、螺母或皮带即可连接泵设备的连接法兰的能力。
The elbow shall be bolted to the floor of the wet-well and be so designed as to receive the pump connecting flange without the need for any bolts, nuts or clamps.
在安装前螺栓的螺纹及螺母应用防磨损剂包覆。
Threads of bolts and nuts shall be coated before installation with anti-galling agent.
特别禁止采用机械螺丝，螺母和螺栓来固定平衡重装置。
Machine screws or nuts and bolts used to attach balance weights are specifically prohibited.
胶水，钉子，螺母，螺栓，螺丝，等。
盲设备口及人孔所用的垫片、螺栓及螺母在买方图纸或数据表中指定。
Gaskets, bolts and nuts for blind nozzles and manholes shall be as specified in Purchaser's drawing or data sheet.
这只不过是一块塑料大螺母和螺栓在每个结束。
It is simply a piece of plastic with a large nut and bolt at each end.
而更大的螺栓就要匹配更大的螺母，这就意味著需要直径更大的螺栓为上紧螺母创造条件。
And the more big bolt will match more nut, which means more need for the bolt diameter to tighten the nut create conditions.
螺栓与螺母均采用热镀锌处理。
而更大的螺栓就要匹配更大的螺母，这就意味着需要直径更大的螺栓为上紧螺母创造条件。
A bigger bolt nut must match the larger, which means that larger diameter bolts need to create conditions on the tight nut.
蝶形螺母、花色螺帽：特厚、特扁、公制、英制、德制、螺母、螺栓。
Nut series: extremely thick, extremely flat, Metric, BS, DIN, nuts, bolts.
试车前务必检查所有螺栓、螺母是否有松动，若有松动的螺栓、螺母必须重新紧固。
Make sure check the bolt and nut before testing run. and if they become less crowded, fastening again.
螺栓与螺母不配。我们认为焊接比铆接好。
将底座安装在已打好的基础上，并用水平仪调平。拧好地脚螺栓上的螺母，将底座与基础固定联接。
Install the base on the ground, and adjust even using the level. Fix the screw, and connect the base and ground.
从进气管道的锁手柄上拆下螺栓、垫圈和螺母。
Remove the screws, washers and nuts from the lock handles for the air inlet duct.
上海凌锐紧固件有限公司是一家专业生产和销售各类高强度螺栓，螺母，垫片及各种非标件的制造商。
Shanghai Lingrui Fasteners Co., Ltd is a manufacturer of various kinds of high strength bolts, nuts, washers and various non-standard parts.
内腔进行去湿处理并检查各连接部位的螺栓、螺母和填料压盖等是否在运输和存放过程中产生松动，如发现应均匀拧紧。
Check the bolt and nut and filling press cover, it it become flexible during the transport or store, screw down it.
地脚螺栓与螺母必须配套加工，配合使用。设备基础的预埋地脚螺栓采用定位模板安装固定。
The anchor bolts and nuts must be processed and used as a whole set. The embedded anchor bolts for equipment foundation shall be installed and fixed with positioning forms.
从理论上、实践上分析了螺纹副在装配过程中失效的主要因素，从而达到提高螺栓、螺母的装配质量。
The main reasons for the failure of thread pair during fitting process is analyzed in this paper. Thus the fitting quality of bolt and nut can been increased.
从理论上、实践上分析了螺纹副在装配过程中失效的主要因素，从而达到提高螺栓、螺母的装配质量。
The main reasons for the failure of thread pair during fitting process is analyzed in this paper. Thus the fitting quality of bolt and nut can been increased.
应用推荐