In this paper, the author discusses the technical method of winding the zinc-plating steel strip in constant speed controlled by computer.
提出了采用计算机控制实现镀锌钢带以恒定速度卷绕的技术方法。
At present, our plating types are: zinc-plating, nickel-plating, black zinc-plating, black nickel-plating, gold-plating, epoxy-plating, chrome –plating, etc.
目前我司电镀的种类有：镀锌、镀镍、黑锌、黑镍、镀金、镀环氧树脂、镀铬等。
The friction property of metal composite pipes with plastic-plating was measured and compared with that of zinc-plating and polypropylene pipes of the same size.
测定了金塑复合管的阻力性能，并与同一规格的镀锌管、聚丙烯管进行比较。
The magnetic steel, the magnetic sensor and the printed circuit board are sealed by a waterproof and anticorrosive technique, and a housing is processed by a color zinc-plating technique.
采用防水防腐技术对磁钢、磁感应器件及印刷线路板进行封闭处理，壳体采用彩色镀锌处理工艺。
In this paper are introduced high cloud point and wide-temperature NDZ-1 potassium chloride and NDZ-2 ammonium chloride bright zinc-plating technology.
本文介绍的NDZ - 1、NDZ - 2高浊点、宽温度氯化钾、氯化铵光亮镀锌工艺，解决了目前国内氯化物镀锌添加剂的一些技术难题。
Zinc plating chromic acid salt after the passivation, corrosion resistance can improve 6 to 8 times.
锌镀层经铬酸盐钝化之后，耐蚀性可提高6 ~8倍。
The applicable fields of alkaline cyanide-free zinc plating and acidic zinc plating before trivalent chromium passivation were proposed.
提出应用于三价铬钝化前的碱性无氰镀锌及酸性镀锌的适用场合。
Concentration of boric acid in bright sulfate zinc plating bath was determined referring to the same method for chloride type zinc plating bath.
将氯化物镀锌液中硼酸的测定方法用于测量光亮硫酸盐镀锌液中硼酸的含量。
New development of brighteners for alkaline zinc plating is reviewed with stresses on the advances in structure of monomers.
论述了现代碱性光亮镀锌添加剂单体结构的新进展及对锌电沉积过程的作用机理。
The influences of grain diameter, grain shape and zinc content of zinc powder on mechanical zinc plating were analyzed.
分析了锌粉的粒径、颗粒形状、金属锌含量对机械镀锌层的影响。
The existing methods of zinc plating blackening by black passivating, coloring, dyeing, etc. are studied, and the high resistance to corrosion of the passivator is highlighted.
综述了镀锌层黑钝化、着色、染色等黑化处理的方法，重点研究了高抗蚀的黑钝化处理。
Taking magnesium alloy AZ91D as an investigation sample, the pretreatment process for electroplating of highly pure magnesium alloy is investigated by means of basic zinc plating processing.
用AZ 91 D镁合金制样，研究了采用碱性镀锌工艺对高纯镁合金进行电镀的预处理工艺性能。
Results showed that the coating problem of hot-dip zinc plating workpiece was improved evidently by using the degassing agents MPP230 and MPP620 containing a primary component of polyethylene wax.
结果发现，主要成分为聚乙烯蜡的脱气剂MPP230与MPP620可以明显改善热浸镀锌件涂装存在的问题。
The mechanical zinc plating of low carbon steel by high energy ball milling was studied.
利用高能球磨原理实现了低碳钢的机械镀锌。
Following the alkaline zinc plating process, the trivalent chromium passivation process is conducted to provide a protection layer for zinc coating.
碱性溶液所获得的镀锌镀层，采用三价铬溶液钝化。
Surface quality adhesion to substrate and corrosion resistance of zinc coating of mechanical plating are described. The deposition model is proposed and is confirmed by experimental results.
阐述了机械镀锌层的表面质量、结合力及其耐蚀性，提出了机械镀锌的沉积过程模型。通过实验数据及分析加以验证。
The processes of application research of rare earth elements as additives on zinc, chromium, nickel, tin, iron, copper plating were described.
简述了稀土添加剂在国内镀锌、铬、镍、锡、铁、铜工艺上的应用研究进展。
Zinc or aluminium plating on steel wire can be completed by the ultrasonic infiltration coating.
超声浸镀可以实现钢丝镀锌、镀铝。
It can also avoid pretermission of plating, burnout of zinc layer on weld beam and heat affected zone, and other limitations on the inner surface of fuel tank made of galvanized sheet.
从而避免了传统电镀锌板直接焊接成型油箱内表面漏镀、焊缝及热影响区锌层烧损等缺陷。
Zinc based RE alloy coating was obtained on the surface of steel samples by adding RE metal salts during the mechanical plating process.
通过在机械镀锌过程中添加不同量的稀土金属盐，在钢铁试样表面形成不同成分含量的锌基稀土合金镀层。
Hot dip galvanizing is commonly used in plating cast iron pipe due to the particularity of material and shape, resulting in high zinc and energy consumption and high cost.
铸铁管件由于材质和形状的特殊性，一般采用热镀锌，但耗锌量大，能耗大，成本高。
The paper provides several substrate plating technologies of zinc alloy cast piecework to substitute cyanide copper plating.
本文介绍了几种取代氰化镀铜的锌合金电镀打底工艺。
Zinc and cobalt content in zinc cobalt alloy plating bath should be maintained in a suitable range so that corrosion resistant zinc cobalt alloy deposit can be obtained.
为获得耐蚀性良好的锌钴合金镀层，必须维持镀液中的锌钴含量在工艺范围内。
Carrier of brightener ACTS as fining the crystal size, making main brightener more soluble in chloride zinc plating.
载体光亮剂在氯化物镀锌中起着细化晶粒和增加主光亮剂溶解度的作用。
The process flows and formula of new system of non-cyanide alkaline zinc plating were introduced.
介绍了新型无氰碱性镀锌体系的工艺流程和工艺配方。
The structure of zinc deposits gained from the new system and the traditional system of alkaline zinc plating were determined by X-ray diffraction respectively.
通过X -射线衍射实验对从该体系和从传统的碱性镀锌体系中获得的锌镀层的结构分别进行了测试。
Electrochemical characteristics of the zinc plating solution are also studied.
同时研究了镀锌液的电化学特性。
Rotating disk electrode system is used to study the coating roughness in high-speed zinc plating.
将旋转圆盘电极体系应用于高速镀锌层粗糙度的研究。
Rotating disk electrode system is used to study the coating roughness in high-speed zinc plating.
将旋转圆盘电极体系应用于高速镀锌层粗糙度的研究。
应用推荐