主要分析带有减载结构的板桩墙的设计及结构内力计算。
It mainly analyzes the design and internal structural force calculation for the sheet-pile retaining wall with load-relieving structures.
板桩墙的入土深度和内力是否准确关系到整个码头结构的稳定性。
Moreover, the overall stability of structure depends on the accuracy of penetration depth and internal stress.
基于竖向弹性地基梁计算模型，提出了板桩结构计算的拟简支梁法。
Based on the calculation model of vertical elastic grade beam, a method called virtual simply-supported beam method for design of sheet pile walls is introduced.
隔水板桩和海底管道地基土体的渗透破坏是两个典型的工程失效问题。
Seepage failures of the foundations for sheet-pile and submarine pipeline are typical issues in the hydraulic engineering.
介绍了京唐港区地连墙码头的建设情况，并对深水遮帘板桩码头方案进行分析。
The construction conditions of diaphragm wall wharf, Jingtang Harbour District are introduced and analysis on the proposal for the covered type of deep water sheet pile wharf are made in the paper.
目前国内码头结构形式多为板桩墙，受墙身高度限制，只适用于中小码头建造。
The most structures of wharfs in China are in the form of sheet pile walls. The height restriction of walls is only suitable for construction of small and medium-sized terminals.
当码头岸墙高度较大时，板桩的锚拉杆需在两根以上，才能减小板桩墙的水平位移。
Also it is necessary to use two anchor ties to minimize horizontal displacement of sheet-pile wall while wharf bank wall with a large height.
板桩码头是一种主要的码头结构形式，其中板桩墙结构计算又是板桩码头的一个重要内容。
Structure computation of sheet-pile wall is a major part in design of sheet pile bulkhead, which is a main form of quay.
此外，还探讨了门架式水力插板桩的动力特性，以及桩长和桩间距对结构动力特性的影响。
Finically, the dynamic property of portal water injection sheet piles is analyzed in this paper, and the influence on dynamic property of pile length and distance between piles is discussed in detail.
根据已有的竖向荷载下刚性板桩筏基础分析结果提出了一种竖向荷载下桩筏基础的通用分析方法。
A general analysis method of piled raft foundation under vertical loading was presented based on the results of piled raft foundation with rigid cap under the same loading condition.
锚锭板是一种承受土体被动抗力的结构单元，常用于支挡结构、板桩锚固和管线转弯处的设计和施工。
Anchor plates are buried structures for resisting passive earth pressure, widely used for design and construction of retaining wall structures, sheet pile bulkheads and pipeline bends.
板桩码头作为码头结构的一种重要形式，在合适的条件下，具有结构强度、稳定性、施工及造价上的明显优势。
As an important form of wharf structure, sheet-pile wharf has great advantages of strength, stability, cost and construction under the right conditions.
结合某港码头加深改造工程的技术经济研讨，推出了一种新的码头结构型式——半遮帘式板桩码头结构，并提出了相应的设计计算方法。
Combining with the technical and economic study and discussion on deepening and reforming project of the terminal of some port, a new type of wharf structure I.
上海市大芦线某工程是整个大芦线航道整治工程的起点，位于五尺沟航段，其主要护岸形式为单锚板桩结构，该文结合工程实践，总结了单锚板桩工程监理控制要点。
A project in Dalu Line is the starting point of the whole Dalu Line Waterway Harnessing Project, and is located at the navigating section of Wucigou.
PH C管桩端板的通常生产方法是采用钢板切割或锻打成型，然后机加工而成。
PHC pipe pile plank in end is usually produced by cutting steel plank or forging, and then machining.
机械装臵、带缆桩、艇吊和其它重型负载集中区域下方的甲板应采用短纵桁或复板进行加强，具体应经过船级社认可。
Decks under machinery, bollards, boat davit and other heavy concentrated loads to be reinforced by carling or welded doubler where necessary as approved by Class.
模具板：标准定位桩孔，定位准确磨槽。
Tooling Plate: Standard dowel locating holes and accurately milled locating slots.
模具板：通用模式与标准安装定位桩孔。
Tooling Plate: Universal mounting pattern with standard dowel locating holes.
模具板：通用模式与标准安装定位桩孔。
Tooling Plate:Universal mounting pattern with standard dowel locating holes.
大量桩筏基础下存在较厚的饱和软弱下卧层，其变形和内力的研究不仅涉及到筏板、桩和土三者之间的相互作用，而且还跟时间有很大的关系。
Research for the deformation and internal forces of piled raft foundation on a thick soft substratum are concerned with not only the interaction between pile, raft and soils but the also the time.
并且，板下单桩及群桩的桩端阻力均能较充分的发挥出来。
Moreover, the tip resistance of pile groups is better used than the single pile.
采用有限单元法对不同筏板刚度下桩筏基础下卧层附加应力的分布规律进行分析。
By finite element method, the distributions of additional stress of piled raft foundations in different raft rigidities are analyzed.
整体式桥台的等代桩长、桥台纵向抗弯刚度、宽跨比及箱梁肋板间距等，是影响该类桥梁剪滞系数的主要因素。
It is proved that the main affecting factors include: equivalent pile length, bending stiffness of abutment, ratio of width to span, distance of webs, etc.
以株六复线桩板墙凹槽型挡土板为例，阐述了翻转模板的设计、制造情况，并对模板的经济技术作了详细分析。
For the example of sheet pile wall fillistered retaining plank, the paper discussed the design, manufacturing of turnover forms, also analysed for the economical technology of forms.
分析了大量现有的共同作用理论，分别整理了上部结构、筏板与桩土的分析模式。
The theories of interaction are summarized and analytical models of raft, pile-soil and superstructure are settled respectively.
如果通过合理布桩可消除冲剪破坏，在给定配筋率的情况下，即可根据最大弯矩确定筏板的厚度。
If pile layout is reasonable to remove the possibility of punching failure , the thickness of piled raft can be simply determined under a certain reinforcement ratio.
在施工中采用了钢管桩、高压防渗板墙、槽内降水、槽外注水回灌，外加复合土钉墙支护措施，保证了基坑开挖。
In construction, supporting measures such as steel pipe pile, high-pressure impervious board wall were adopted, ensuring the excavation of base pits.
发现置换率相同时，承台板宽度大，水泥土桩的荷载临界深度也大，桩侧摩阻力分布深度下移。
It is found that the load critical depth and the friction range increase while the cap breadth increases with the same replacement ratio.
发现置换率相同时，承台板宽度大，水泥土桩的荷载临界深度也大，桩侧摩阻力分布深度下移。
It is found that the load critical depth and the friction range increase while the cap breadth increases with the samer.
介绍某高速公路管理处考虑筏板-桩-地基共同作用的分析与计算方法，以供类似工程参考。
Introduced the method for analysis and calculation of coaction between raft foundation, piles and ground for an expressway office, it is useful for reference of the same project.
应用推荐