This dissertation successfully used cluster computing for solving large-scale linear algebraic equations problems when the finite element method (FEM) is applied in electrical prospecting.
本文成功地将机群计算应用到解决在电法勘探中使用有限元方法（FEM）时产生的大规模线性方程组问题。
Due to high computing precision and processing arbitrary structure shape, finite element method (FEM) can become proper method to solution this problem.
具有较高计算精度并能够处理任意结构形状的有限元素法可作为求解该问题的合适的方法。
Based on finite element method (FEM), the author compiles the three-dimensional seepage field computation program of RCC dam.
开展碾压混凝土坝渗流场的有限单元法研究工作，编制完成碾压混凝土坝三维渗流场计算程序。
Based on finite element method (FEM), the vibration of power transformer windings caused by electrodynamic force is analyzed.
利用有限元算法分析了三相电力变压器绕组各线匝在不同运行模式下电动力引起振动。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
To obtain a constant gradient magnetic field outside unilateral nuclear magnetic resonance (NMR), optimal design method based on finite element method (FEM) and topology optimization is proposed.
为了在单边核磁共振仪器外产生梯度恒定的磁场，提出利用基于拓扑优化和有限元法的优化设计方法。
The variation finite element method (FEM) using the pseudo-potential function was presented for the simulation of transonic rotational flows.
本文运用赝势函数变分有限元方法数值模拟了绕翼型的跨音速有旋流动。
The thesis provides the concept of variable rigid body which simulates the grouting, and simulates the process of shield tunneling with finite element method (FEM).
本文提出了用变刚体模拟注浆体性质随施工过程的变化，用有限单元法模拟盾构法隧道施工的全过程。
The numerical analysis of finite element method (FEM) is an important means of modern engineering refined design, having become an indispensable engineering tool for designers.
有限元数值分析是现代工程精细设计的重要方法，已成为工程设计人员不可或缺的重要工具和手段。
The effects of stator and rotor eccentricity on the magnetic field distributions, cogging torque and unbalanced force were calculated in this paper by using finite element method (FEM).
采用有限元法计算分析了定子偏心与转子偏心对无刷直流电动机的气隙磁场、定位力矩及单向磁拉力的影响。
The numerical result of water temperature of reservoir in Longtan engineering by use of finite element method (FEM) is reliable and accurate.
通过对龙滩工程水库水温的计算结果表明，用有限元法计算水库水温有较高的精度和可靠性。
The stress distribution of continuous and recessed bonding single-lap joints is discussed with use of elastoplastic finite element method (FEM) and experiment, considering the effect of fillet.
运用弹塑性有限元法结合实验研究了连续和间隙连接的单搭接接头应力分布规律，并考虑了胶瘤的影响。
The analytical result proofed by finite element method (FEM) indicates the same results by two methods.
通过有限元法验证解析结果，两种方法所得结果吻合较好。
The resistivity, formation factor, and resistivity index of rocks were calculated using the finite element method (FEM) and we studied the effect of rock wettability on electrical properties.
利用有限元方法计算了岩石电阻率，进而得到岩石地层因素和电阻率指数，并考查了岩石润湿性对岩石电阻率指数的影响。
Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).
用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。
We all know that both finite element method (FEM), symplectic algorithm and multi-symplectic algorithm are powerful tools to solve partial differential equations numerically.
我们知道有限元方法以及辛算法和多辛算法是解偏微分方程数值解的重要方法。
The transient heat transfer process of piston set-cylinder liner system in gasoline engine was researched with direct coupling finite element method (FEM).
采用直接耦合的有限元分析方法对一汽油机的活塞组—气缸套系统的瞬态传热过程进行了研究。
An effective vector finite element method (FEM) for analysis of 3d radiation problem is proposed.
提出了一种用于3 -D电磁辐射特性分析的快速有限元方法。
The effects of casing diameter on acoustic log in cased-borehole at free pipe situation are investigated with finite element method (FEM).
用有限元方法研究了自由套管井中不同直径的套管对声波测井的影响。
Biomechanical analysis of artificial hip prosthesis was made by nonlinear finite element method (FEM).
并采用非线性有限元方法，进行人工髋关节的生物力学分析。
The rectangular groove guide (RGG) is analyzed by the finite element method (FEM).
本文用有限元法分析了矩形槽波导。
The results from analogy analysis, finite element method (FEM) and experiment analysis are presented.
分别用解析法和有限元方法的计算结果与试验结果进行了比较。
The Monte Carlo method combined with the elastoplastic finite element method (FEM) is proposed to analyze the slope stability problems.
蒙特卡洛随机搜索法与弹塑性有限元法结合，求解边坡稳定问题。
The stress and displacement distributions of the bellows under torsion loading are investigated by using both finite element method (FEM) and equivalent cylinder method.
本论文分别采用有限元法和等效圆筒法对波纹管在扭转载荷作用下的应力分布和位移变化情况进行了计算。
The flow stress of ferrite/pearlite steel under uniaxial tension was simulated with finite element method (FEM) by applying commercial software MARC/MENTAT.
应用MARC/MENTAT商用有限元软件，对铁素体/珠光体钢的单向拉伸过程进行了有限元模拟。
Among the numerical simulation methods, the finite element method (FEM) is widely to solve the electric field with complex structure and multi-dielectric medium with high precision.
在常用数值求解方法中，有限元法以其通用性强，适用于结构复杂、多重介质复杂场域求解，且求解精度高等优点而被广泛用于电器电场的数值求解。
Magnetic fluid seal structure is analyzed by the finite element method (FEM) in this article.
本文利用有限元数值计算方法对磁流体密封结构进行了分析。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
应用推荐